Tender For Augmentation Of Electrical System For Tertiary Treatment Plant In Anupuram Township.
Tender Value
20.60 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
13 days left
EMD
41200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Electrical System For Tertiary Treatment Plant In Anupuram Township.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+) Less (-) Tender Inviting Authority: Chief Engineer, Civil Engineering Group, GSO, Kalpakkam. Name of Work: Augmentation of Electrical system for Tertiary treatment plant in Anupuram Township. Tender No: GSO/CTC/ESD/346/2026 Name of the Bidder/ Bidding Firm / Company : PART-II (FINANCIAL BID) Note : 1) This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. 2) Bidders are allowed to enter the Bidder Name and Values only.3) Rates quoted should be inclusive of GST @ 18% and any other taxes as applicable. NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Item.No. Item Description Item Code / Make Quantity Units Estimated RateinRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE including all taxes in Figures to be entered by the Bidder inRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Rates in words Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Unit for Rate TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Design, manufacturing, testing at manufacture's works, packing, transportation, delivery, unloading and storage at site, testing and commissioning of the 415 Volts MCC and detailed specification. |
| 3 | Motor Control Centre Panel at recycled Plant -1 (STP) consist of following:a) 125 Amps, 4 Pole MCCB with magnetic tripping facility with functional indication lamps, 125/5A CT, MFM,CBCT,ELR, Castel interlock as incoming feeders – 1 Set with 1 Key.b) 63 Amps,4 Pole MCCB with Thermal magnetic tripping facility with indication lamps, with 20 HP Star/ Delta Starters including Motor Protection relay as outgoing feeders - 2 Sets. c) 63 Amps, 4 Pole MCCB with Thermal magnetic tripping facility as outgoing feeders - 2 Sets. |
| 4 | Motor Control Centre Panel at recycled Plant -2 (Near Ganga Cluster) consist of following:a) 125 Amps, 4 Pole MCCB with magnetic tripping facility with functional indication lamps, 125/5A CT, MFM,CBCT,ELR, Castel interlock as incoming feeders – 1 Set with 1 Key.b) 63 Amps,4 Pole MCCB with Thermal magnetic tripping facility with indication lamps, with 10 HP Star/ Delta Starters including Motor Protection relay as outgoing feeders - 4 Sets. c) 63 Amps, 4 Pole MCCB with Thermal magnetic tripping facility as outgoing feeders - 2 Sets. |
| 5 | Wall Mounting Star/Delta Starter Control Panel at Malligai open well & ASTPa) 63 Amps, 4 Pole MCCB with Thermal magnetic tripping facility with functional indication lamps, 100/5A CT, MFM,CBCT,ELR, with 10 HP Star/ Delta Starters including Motor Protection relay - 1 Set. |
| 6 | Automatic Liquid level Control Panel at STP consist of following:a) 32 Amps,230 V,AC ON & Off Switch,Liquid level controller,Contactors, Hooter, Pushbuttons with including wiring, etc. |
| 7 | Loading, Transportation, Unloading at site, Laying, Testing and Commissioning of one number PVC/HRPVC/XLPE insulated and PVC sheathed Stranded Aluminium/copper conductor power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering with chamber burnt/cement bricks on sides & top, refilling the trench and providing RCC route indicator etc as required (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 8 | 3/3.5/4 Core X above 25 to 3/3.5/4 Core X up to 120 sqmm |
| 9 | Loading, Transportation, Unloading at site, installation, Testing and Commissioning of 1100 Volts Grade PVC/HRPVC/XLPE insulated, Stranded Aluminium/copper conductor cables of following sizes in built-in trenches, on walls, poles and through embedded pipes including supply of GI spacer, clamps etc and as per the detailed specification (Note: Cable will be issued free of cost by the department).(Refer Sec VI, Clause No.3) |
| 10 | 3/3.5/4 Core X upto 25 Sqmm |
| 11 | 3/3.5/4Core X above 25 & up to 120 sqmm |
| 12 | End Termination of the following sizes of Aluminium Conductor PVC Insulated and sheathed armoured UG Cable using Single Compression, Heavy Duty, Gland connecting the cable to the equipment such as Switches/Panel Boards etc. using Comet or equivalent make Aluminium crimping lugs as directed by Engineer-in-Charge. The rate shall include the cost of supply of Cable Gland and Lugs. The Contractor shall arrange for making holes wherever necessary for fixing cable gland. (Refer Sec VI, Clause No.10.1). |
| 13 | 4 Core X10sqmm |
| 14 | 4 Core X 16 Sqmm |
| 15 | 3.5/4C x 50/70 sq.mm |
| 16 | Supply, installation and testing of GI Pipe Earth Electrode as per IS: 3043 including RCC Chamber and RCC cover slab as per Drawing Nos. IGC/ESD/5060/1007/1 & IGC/ESD/5060/1008/1 are enclosed. (50 Kg. Each Bentonite & Charcoal shall be provided for each earth pit). (Refer Sec VI, Clause No.12.4). |
| 17 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9). |
| 18 | 25 x 6 mm GI flat |
| 19 | Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9). |
| 20 | 25 X 6 mm GI flat |
| 21 | Installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with required Junction boxes, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc, in RCC Roof Slab, Columns, Beams etc, as per the detailed specification. (Note: GI Conduit required alone will be issued free of cost by the dept. All other materials required for the completion of this item shall be supplied by the contractor). (Refer Sec VI, Clause No.27). |
| 22 | 25 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduits with 75mm deep junction boxes |
| 23 | Installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with required Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc, in Floor, Walls, Brick, Block Masonry as per the detailed specification. (Note: GI Conduit required alone will be issued free of cost by the dept. All other materials required for the completion of this item shall be supplied by the contractor). (Refer Sec VI, Clause No.27). |
| 24 | 25 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduit |
| 25 | Supply and Installation of MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and painting/ galvanising as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11). |
| 26 | MS fabrication 1 coat primer & 2 coats synthetic enamel paint |
| 27 | Supply and replacement of junction box as per the detailed specification and as directed by Engineer-in-charge |
| 28 | 250 x 255 x 120 mm MS Junction Boxes |
| 29 | Supply and Embedment of following sizes of flush mounting POWDER COATED TPN/SPN DB Enclosures with Double Door consisting of Phase, Neutral and Earth Bus and interconnecting wires etc. at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge .(Refer Sec VI, Clause No.15.2). |
| 30 | SPN, 8 Way Distribution Board with all accessories, cat No:507611 |
| 31 | Supply and Embedment of following sizes Cable end termination box at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge.(Refer Sec VI, Clause No.15.2.2). |
| 32 | SPN, 8 way Cable end box, cat No:507913 or equivalent suitable for SPN, 8 way Distribution Board cat No:507611 |
| 33 | Assembling, installation, testing and commissioning of MCB DB enclosure already embedded in the wall including supply of Engraved Circuit Identification Plate and Danger Board as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3). |
| 34 | SPN, 4/6/8 Way Distribution Board |
| 35 | Supply and Embedment of 50mm Deep, Square/Rectangular Concealed type and GI double earthed modular metal boxes of the following types and as specified in RCC/Brick/Concrete Block Masonry with finishing and making good as per the detailed specification. (Refer Sec VI, Clause No.15.12). |
| 36 | ONE/TWO Module, 1.2mm thickness |
| 37 | THREE Module, 1.2mm thickness |
| 38 | SIX Module, 1.2mm thickness |
| 39 | EIGHT Module rectangular, 1.2mm thickness |
| 40 | Supply and Embedment of MS fan Hook Boxes in RCC roof slab with finishing and making good as per drawing No:IGC/ESD/9170/8009 and the detailed specification. (Refer Sec VI, Clause No.15.11). |
| 41 | Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7). |
| 42 | One/Two module |
| 43 | 3 Module |
| 44 | Supply fixing testing and commissioning of the following RCCBs on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2). |
| 45 | RCCB DP 25A 30mA, TYPE AC |
| 46 | Supply Installation testing and commissioning of the following MCB on Distribution Boards as per the detailed specification. (Refer Sec VI, Clause No.14.2). |
| 47 | 6-32 Amps SP MCB (Type-C) |
| 48 | Wiring for Primary lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 49 | Wiring for Light/Sensor/Fan Points with 2 Runs of 1.5 Sq.mm copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for Earth from MCB Distribution Board to Primary light/sensor/fan point through Control Switch Box including 6Amps modular switch. |
| 50 | Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from MCB Distribution Board to Power point through Control Switch Box including 16A modular switch, 6/16 Amps combined shuttered type Socket and 6A modular switch & 3 pin, 6A shuttered type Socket, Modular Plate. |
| 51 | Wiring for Secondary lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW/Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 52 | Wiring for Power point with 3 Runs of 2.5 Sq.mm Copper wires for Phase & Neutral and Earth from Control Switch Box to control switch box including supply of 16A modular switch, 3 pin 6/16 A combined shuttered type Socket, Modular plate. |
| 53 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch box to Light point/Ceiling fan including 1 No 6A modular switch |
| 54 | Wiring for Light point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Light point to Light point /sensor/contactor |
| 55 | Supply, transportation, installation, testing and Commissioning of the following type of BOX type luminaires using ball & socket. (Refer Sec VI, Clause No.16.1). |
| 56 | 29W, 4 feet, IP20, LED Batten Luminaire |
| 57 | Supply, transportation, installation, testing and Commissioning of the following type of Wall (surface) mounted luminaires. (Refer Sec VI, Clause No.16.1). |
| 58 | 6W, IP66, LED Bulkhead Luminaire |
| 59 | Excavation in hard soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2) Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Less (-) 0.0 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Government of IndiaDepartment of Atomic EnergyGeneral Services Organization Centralised Tender Cell TENDER DOCUMENT FOR Augmentation of Electrical system for Tertiary treatment plant in Anupuram Township. Tender No: GSO/CTC/ESD/346/2026 Part – II : Financial Bid (Section - VIII) INDEX S.No. Title Page No. |
| 60 | GENERAL INFORMATION FOR GUIDANCE OF TENDERERS |
| 61 | The schedule of quantities is to be read for the purpose of pricing in conjunction with the special conditions, general rules for the guidance of contractors, conditions of contract, specifications, scope of work (Section V), and General Specification (Section VI), drawings, schedule of supply of materials and the appendices for complete interpretation of this scope of work quantity wise. |
| 62 | The prices inserted in the schedule of quantities shall be inclusive of value of the work described including all cost and expenses, which may be required in and for the construction of the work described together with the general risks, liabilities and obligations not forth or implied in the documents on which the tender is to be based. |
| 63 | The quantities stated are to be considered approximate only and the unit prices entered in the schedule of quantities and prices shall apply only to the actual quantities measured in the completed work in accordance with the specifications. |
| 64 | Items of work described in brief are detailed under specification of Work.The scope of work will not be estimated from the brief description of this schedule. |
| 65 | Rate quoted must include all components required for meeting the specification and performance requirements of the item irrespective of whether they are specifically brought out in this schedule or not. |
| 66 | All the materials other than those shown in schedule of supply of materials in section VII are to be arranged by the contractor and his rates should account for the same. |
| 67 | Rates quoted for all items in this tender shall include cost of all materials. Department will not supply any materials other than materials stipulated in Section - VII of the tender and as such the rates quoted must be all inclusive. |
| 68 | If contractors need any clarification they are required to contact the ‘Head, CTC, GSO, Kalpakkam – 603 102, Chengalpattu district, Tamilnadu (Ph – 044 - 27481238 and 044-27480500 Extn. 84299,87345,85803,85532) during office hours. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender