Tender For Construction Of Control Room Building And Other Civil Works For Setting Up New 33/11 Kv Spread Out Type Sub-Station With (2X6.3) Mva Power Transformer Including Electrical Wiring At Jogeshganj, Basirhat Division Under North-24 Parganas Reg
Tender Value
1.82 Crore
Estimated cost
Bid Submission
22 Jul 2026
10 days left
EMD
3.64 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Control Room Building And Other Civil Works For Setting Up New 33/11 Kv Spread Out Type Sub-Station With (2X6.3) Mva Power Transformer Including Electrical Wiring At Jogeshganj, Basirhat Division Under North-24 Parganas Region.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS: (In riverine areas connected by river route and/or ferry crossing under Extra Rate @ 22.5% for Gosaba, Basanti, Sandeshkhali, Hingalganj & Minakhan P. S.) Earth work in excavation of foundation trenchesor drains, in all sorts of soil(including mixed soil but excluding laterite or sand stone)including removing spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing & ramming the bottom, bailing out water etc. as required complete. (a) Depth of excavation not exeeding 1500mm |
| 2 | (b) Depth of excavation for additional depth beyond 1500mm and upto 3000mm but not required shoring. |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. including watering and ramming etc. layer by layer complete (A) with earth obtained from excavation of foundation. |
| 4 | Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work)(b) (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth. |
| 5 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. measurement of finished quantity)(payment to be made on measurement of finished quantity). |
| 6 | Filling in foundation or plinth by medium sand in layer not exceeding 150mm. as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand. |
| 7 | Single brick flat soiling of picked Jhama bricks including removing & dressing bed to proper level & filling joints with local sand. |
| 8 | Cement concrete with graded stone ballast (40mm. size) excluding shuttering. In ground floor, (A) Pakur Variety (I) 1:3:6 proportion. |
| 9 | Hire & labour charges of shuttering with centering & necessary staging upto 4m. using approved stout props and thick hard planks of approved thickness with required bracing for concrete slabs beams, columns, lintels curved or straight including fitting & striking out after completion of work.(Upto the roof of ground floor).(a) 25mm to 30mm thick wooden shuttering without staging in foundation. |
| 10 | (b) 25mm to 30mm thick wooden shuttering as per decision and direction of E-in-Charge (i) In ground floor. |
| 11 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust(if necessary,) cutting to requisite length, hooking & bending to correct shape, placing in proper position & binding with 16 gauge black annealed wire at every inter section complete as per drawing and direction.(a) For work in foundation & upto roof of ground floor/upto 4m. JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL |
| 12 | Ordinary cement concrete mix (1:2:4) with graded stone chips(20mm nominal size) excluding shuttering and reinforcement, if any, as per relevant IS Codes. Pakur variety. (i) In Gr. Floor. |
| 13 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips(20mm.nominal size) excluding shuttering and reinforcement,if any, as per relevant IS-codes Pakur variety. Upto the roof of ground floor. |
| 14 | Brick work with 1st class bricks in cement mortar (6:1)(i) In foundation & plinth |
| 15 | (ii) In super structure, (a) In ground floor |
| 16 | 125mm thick brick work with 1st class bricks in cement mortar (1:4). In ground floor. |
| 17 | Plaster(to wall, floor, ceiling etc.) with sand & cement mortar including rounding off or chamfering corners as directed and raking out, joints including throating, nosing and drip course, scaffolding/ staging where necessary (Excluding cost of chipping over concrete surface).with 6:1 cement mortar (a) For outer wall. 15mm thick plaster (i) In ground floor |
| 18 | (b) For Inner wall. 20mm thick plaster. (i) In ground floor |
| 19 | With 1:4 cement mortar (i) 10 mm thick plaster |
| 20 | Neat cement punning about 1.5 mm. thick in wall, dado, window sills, floor, drain etc.Note: Cement 0.152 cum per 100sqm |
| 21 | 18mm to 22mm kota stone slab set in 20mm thick (av) c.mortar(1:4) in floor, stair and lobby including pointing in cement slurry with admixture of pigment matching the stone shade including grinding & pointing as per instruction of E-in-Charge to match with existing work. (slurry for bedding @ 4.4kg/sqm and pointing @ 2.2 kg/sqm). (i) In Ground floor. |
| 22 | Supplying, fitting & fixing marble slab, 15mm to 18mm thick in floor, lobby, stair, landing & treads etc. over 20mm (av) thick base of cement.mortar(1:2) laid with white cement slurry @4.4kg/sq.m before placing marbel& jointed with white cement slurry @2.0kg/sq.m with necessary pigments including grinding and Granite polishing as per direction of E-in-Charge.(White cement and pigment to be supplied by the agency) (a) With Makrana plain pink /Adranga Pink /Garbh Gulabi/ Udaypur pink / Udaypur Green / Black Bhaslana. Area of each slab/tiles exceeding 0.3 sq.m. But not exceeding 0.60sqm (i) In gr. floor. |
| 23 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tiles & finishing the joints with white cement mixed with colouring oxide if requiredto match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc. For wall: with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm & joint filling using white cement slurry @ 0.20kg/Sqm.Area of each tile upto 0.09 Sqm coloured decorative. |
| 24 | Supplying, fitting & fixing suprivory endure (acid proof) tiles of 8mm to 10mm thick in floor and skirting stair case etc. laid in panels or patern as directed with cica advised and tiles grout with complete including all material and labours and all complete. |
| 25 | Supplying and laying chequered tiles of any shade & approved quality with (1:1.5:3) cement concrete laid in panels or patterens as directed in pavement, footpath etc. including necessary underlay 25mm thick (av) c. mortar (1:3) complete in all respect in all labour and materials. (slurry @ 4.4 kg/sqm at backside and pointing @2.4 kg/sqm for joint filling). Red Variety, (i)25mm thick (red variety). |
| 26 | M.S. Structual works in columns, beams, chequered plate etc. with simple rolled structural members (e.g.Joists, angles, channel sections conforming to IS:226, IS:808 & SP(6)-1964 connected to one another with brackets, gussets, cleats as per design, direction of E-in-Charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS:816-1956 & IS:1955 using electrodes of approved make and brand conforming to IS:814-1957, haulage, hoisting and erection all complete. The cost includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work required including all incidental charges such as electricity charges, labour insurance charges etc. For structural members of specified sections weighing less than 22.5Kg/m (Payment will be made as per the schedule). |
| 27 | Collapsible gate with 40mm x 40mm x 6mm tee as top and bottom guide rail, 20mmx10mmx2mm vertical channels 100mm apart in fully stretched position 20mmx5mm M.S.flats as collapsible bracings properly rivetted and washered including 38mm Steel rollers including locking arrangements, fitted and fixed in position with lug set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. & making good damages complete. In ground floor. |
| 28 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete,iron butt hinges and MS clamp.(The quantum should be carried out upto three decimals). (i) Sal: Local. In ground floor |
| 29 | Supplying solid flush type doors of commercial quality, the timber frame consisting top and bottom rails and side styles of well season timber 65mm wide each and the entire frame fitted with 37.5mm wide battens placed bothway in order to make the door of solid core and internal lipping with garjans and similar wood veners using phenol phormaldihyde as glue etc. complete including fitting, fixing shutter in position but excluding the cost of hinges and other fittings. 35mm thick shutters (single leaf). In gr. floor. |
| 30 | Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (IS 230/72fitted and fixed complete. (a)With contineous plate base ( hexagonal/round rod). (125 mm grip x 12mm dia rod). |
| 31 | Anodised aluminium barrel/tower/socket bolt (full covered)of approved quality manufactured from extruded section conforming to IS(IS.204/74)fitted and fixed with cadmium plated screws. 300mm long x 12mm dia bolt. |
| 32 | Labour charge for fabrication & installation of composite door, window, partitions made from annodlized extruded alloy aluminium sections for the following units :-(B) (i) parly glazed and partly panelled or fully glazed made from annodized extruded alloy aluminum sections fabrications to masonry wall including cutting to proper shape and size, drilling and allining, fitted with heavy duty hydraulic action floor spring placed in the floor with mending damaged, with top pin assembly of approved make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fitings, fixing, adhesive and joineries cutting glass of approved make to requisite shape and size fitting with dry steneoprene/EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of E-I-Charge. (The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleate angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, lockng arrangements, weather gasketing/ wood pile, floor spring, top pin, handle, tower bolt, glazing clips etc. For double leaf swing door. (i) In ground floor. |
| 33 | Supplying profiles of required section made of Aluminium alloy extrusions conforming to IS:732-1983 and IS:1285-1975, anodized (with required film thickness and specified colour/ natural) matt finished conforming to IS:1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/ certified make and brand as per direction of E-in-Charge. (A) In 10-12 micron thickness annodizing film. Natural white.Movable door shutter. (i) Door frame (Top & sides) |
| 34 | (ii) Shutter (a)Top rail |
| 35 | (b) Bottom rail |
| 36 | (c) Lock Rail |
| 37 | (d) Door vertical |
| 38 | (e) Glazing clip |
| 39 | Supplying 125 mm long acrylic handle for aluminium door as per approved make and brand. (A) natural colour. |
| 40 | Supplying Aluminium casted body hydraulic door closer as per I.S.I. |
| 41 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in charge. 250mm long. |
| 42 | Supplying 4 lever mortice lock of any approved make and brand as per direction of Engineer-in Charge 100mm. |
| 43 | Supplying bubble free float glass of approved make and brand conforming to IS 2835-1987, 6mm thick clear glass. |
| 44 | Supplying EPDM gasket of approved make and brand as per direction of Engineer-in charge.(b) 'U' shapeppd EPDM gasket for frames. |
| 45 | (c) Weather gasket/ wool pile for door vertical. |
| 46 | Supplying,fitting and fixing M.S. Clamp for door and window frames,made of flat bent bar,end bifurcated with necessary screws etc In cement concrete (1:2:4) including cutting brick work/ concrete work as per direction.(Cost of concrete will be paid seperately). 40mmx6mm,125mm length. |
| 47 | Iron butt hinges of approved quality fitted and fixed with steel screws with ISI mark. (i) 100mm X50mm X 1.25mm. |
| 48 | Iron hasp bolt of approved quality fitted and fixed complete( oxidised) with 16 mm dia rod with centre bolt and round fitting. (c) 300 mm long. |
| 49 | Supplying, fitting and fixing hinge cleat in position with 50mm iron Butt hinge (Local sal). |
| 50 | M.S or W.I ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for window, railing etc. fitted and fixed with necessary screws etc. complete as directed. Grill weighting above 10kg/ sqm and upto 16kg/ sqm. (i) In ground floor. |
| 51 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor. |
| 52 | Supplying, fitting & fixing steel windows and ventilators with or without integrated grills confirming to IS 1038-1975 & manufactured from rolled steel sections confirming to IS 7452-1974 with non-friction projection box type hinges glazing chips lugs, locking bracket, handle plate etc. including hoisting in position straightening, if required, fixing lugs in cement concrete (1:2:4) with stone chips 20mm. down. cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. Without integrated grills:(a) Fixed type steel windows as per IS sizes with horizontal glazing bars. (i) In ground floor. |
| 53 | (b) Openable steel window as per IS swizes with side hung shutters and horizontal glazing bars with/ without fixed type ventilators. (i) In ground floor. |
| 54 | Two point nose steel handle including fitting and fixing. |
| 55 | Steel peg stay 300mm long including fitting and fixing. |
| 56 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(i) In ground floor |
| 57 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. one coat. (i) In ground floor |
| 58 | Priming one coat on Timber or plastered surface with synthetic enamel/oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 59 | Priming one coat on steel or other metal surfacewith synthetic enamel/oil bound primer of approved quality including smoothening surface by sand papering etc. |
| 60 | A) Painting with best quality synthetic enamel paints of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(i) On steel or other metal surface, with super gloss (hi-gloss) two coats (with any shade except white). |
| 61 | (ii) On timber or plastered surface,with super gloss (hi-gloss) two coats (with any shade except white). |
| 62 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, cinolete as per manufacturer's specification and as per direction of E-in-Charge , a) one coat: ii)Water based interior grade Acrylic Primer. (i) In ground floor. |
| 63 | Acrylic emulsion paint of approved make and brand to wall, celling including sand papering in intermediate coats including putty. Two Coats. Standred quality. |
| 64 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5mm) |
| 65 | Supplying, fitting & fixing UPVC pipes (A Type) & fittings conforming to IS 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete srtuctures etc. if necessary and mending good damages including joining with jointing materials (spun Yarn, Valamoid/ Bitumen/ M-seal etc) complete.(A) UPVC pipes: 110mm |
| 66 | (B) UPVC Fittings: a)Plain Tee: 110mm |
| 67 | (b) Shoe: 110mm |
| 68 | (c) bend 87.5 degree |
| 69 | Supplying, fitting and fixing gunmetal wheel valve full I standard pattern best quality of approved brand and make tested to 21kg per sqcm.(i) 20mm dia |
| 70 | (ii) 25mm dia. |
| 71 | (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm |
| 72 | (g) PTMT overhead shower ( Prayag or equivalent)(i) 75 mm round |
| 73 | b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent). |
| 74 | Supplying, fitting & fixing white vitreous china best quality approved made wash basin with C.I. brackets on 75mmx75mmx75mm wooden block C.P.waste fittings of 32mm.dia with approved quality brass C.P. pillar cock of 15mm. Dia C.P. chain with rubber plug of 32mm. dia approved quality PVC waste pipe with CP nut 32mm dia 900 mm long approved quality PVC connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paints. 630mm x 450mm size. |
| 75 | Supplying, fitting & fixing Flat back urinal (half stall urinal) in white vitreous china ware of approved make in position with brass screw on 75mm. X 75mm x 75mm wooden blocks complete (590mm x 390mm x 380mm). |
| 76 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap (with vent). |
| 77 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C. (i) Plastic (hollow type) black. |
| 78 | Supplying, fitting & fixing porcelin soap tray of approved make. (i) Recessed soap tray of size 150 mm X 150 mm. |
| 79 | Supplying, fitting & fixing 10 ltrs. PVC low down cistern conforming to IS specification with PVC fittings complete, C.I brackets including two coats of painting to bracket etc. |
| 80 | Supplying plastic water storage tank of approved quality with closed top with lid (black) multi layer (1000 ltrs. capacity). |
| 81 | Labour for hoisting plastic water storage tank. upto 1500 ltrs. Capacity, (a) upto 1st storey from ground level. |
| 82 | Labour for punching hole in plastic water storage tank upto 50mm dia. |
| 83 | Supplying, fitting & fixing 18mm thick marble partition slab with chawk doongri marble square cut, both sides polished with two front corners rounded and edges polished.urinal flush pipe fittings of approved brand. |
| 84 | Supplying, fitting & fixing 32mm dia pipe of approved make with necessary fixing materials and clamps complete Polythene flush pipe. |
| 85 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3Meter Length. 110mm dia |
| 86 | Door Tee, 110mm dia |
| 87 | Vent Cowl, 110mm |
| 88 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. i) 110mm dia. |
| 89 | Constructing Inspection Pit inside measurement 600mmx600mmx upto 600mm (depth) with 250mm thick 1st class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stonechips over a layer of jhama brick flat soling 15mm thick (1:4) cement plaster to inside walls and outside wall upto G.L. and 20mm thick (1:4) plaster to bottom of the pit providing necessary invert with cement concrete (1:3:6) with stonechips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100mm. thick RCC slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6mm thick (1:4) cement plaster in all external surfaces of the slab and one 560mm dia RCC manhole cover of approved make supplied, fitted & fixed in the slab with necessary fittings, necessary earth work in excavation in all sorts of soil, filling the sides of the pit with earth & removing spoils after work complete in all respect with all costs of labour and materials with pakur variety. (JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL) |
| 90 | Construction of septic Tank of different capacities as per approved drawing with 1st class brick work cement mortar (1:4) including two 560mm dia R.C.C. manhole cover (heavy type) of approved make supplied, fitted & fixed in the 100 mm thick RCC (1:1.5:3) top slab with necessary fittings, 20 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4:1) to outside wall upto 200 mm below G.L. floor finished with 25 mm thick grey artificial stone over 100 mm thick RCC (1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, S.W. tees, C.I. foot rest etc. including excavating earth in all sorts of soil shoring, bailing & pumping out water asnecessary,ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils filling up the chamber with clear water removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes joints etc.with internal plaster work and artificial be done with admixture of water proofing compound @ 5% by weight of cement with all costs of labour and materials. for 20 users. With Pakur variety.(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL ) |
| 91 | Construction of circular soak well 2.5 mtr. deep in all types of sandy soils with dry brick work upto 1.6mtr from the bottom having 150mm Intermediate cement brick work (4:1) band all round & cement brick work(4:1) upto 0.90m. from top with 20mm. Thick cement plastering (4:1) to inside face upto the depth of cement B.W. 15 mm thick cement plaster (4:1) on outer from top of the well upto G.L. and 6 mm thick cement plaster (4:1)on top of RCC slab including filling bottom 1.0m. of inside of the well with brick metal (50mm to 63mm size) including RCC cover slab of 100 mm thick RCC (3:1.5:1) with stone chips with necessary reinforcement and shuttering and RCC (560 mmdia) manhole cover (heavy type) of approved make supplied fitted and fixed in the cover slab with necessary fitting making necessary arrangement for pipe connections excavation of well including shoring, dewatering & removing the excess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250mm thick dry brick work & 250mm thick cement brickwork (6:1) and 1.00mtr. inside dia(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL ) |
| 92 | Supplying, fitting & fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550mm x 400mm. |
| 93 | Supplying, fitting & fixing Towel rail with two brackets, C.P. over brass. 25mm. dia, 450mm. long. |
| 94 | Supplying, fitting & fixing approved brand PVC connector white flexible with both end coupling with heavy brass CP nut 15 mm dia. 450mm long. |
| 95 | Supplying fitting and fixing approved brand 32mm dia PVC waste pipe with PVC coupling at one end fitted with necessary clamps. 1050mm long. |
| 96 | Supplying, fitting and fixing shower of approved brand and make. Chromium plated round shower with revolving joints (Equivalent to Code no 541(N) & Model-Topical/ Sumthing Special of ESSCO or similar brand). |
| 97 | Supplying best Indian sheet glass panes set in putty & fixed with nails and putty complete in all floors, 4mm. thick(weighing 7.4Kg./Sq.m.). In steel window. In grond floor. |
| 98 | 25mm Damp proof course with C.C.(1:1.5:3) (with graded stone aggregate 10mm nominal size) and painting the top surface with a coat of bitumen (VG-40) using 1.7 kg per sqm. including heating the bitumen and cost and carriage of all material complete. Bitumen to be supplied by the agency. |
| 99 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 25 mm. thick |
| 100 | Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50mmx47 mm with a wall thickness of 5mm, madeout of extruded 5mm, PVC sheet miter cut at two corner sand joined with two nos of 1.5mm long brackets of 15mmx15mmM.S. square tube. The two vertical door profiles are to be reinforced with 19mmx19mmM.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100mm long M.S. Screws through the frame by using P.V.C fasteners. Aminimum of 4Nos of screws to be provided for each vertical member and minimum2 Nos forhorizontal member etc. complete as per Manufacturer‟s specification and direction of Engineer-in-Charge. |
| 101 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & railof the P.V.C. door shutter will be made of rigidP.V.C multicavity hollow chamber of suitable size and section with 2.0mm (+/-0.2mm) wall thickness, the section will have2nos. built in beads, horizontal & vertical sectionshall be fixed toeachotherby self tapping screws and 2nos. of solid plastic or M.S. tubular galvanised brackets of length 200mm x 80mm and other100mmx100mm both 1.20mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105mmx37mmwith 2.0mm(+/-0.2mm)wall thickness will be fitted in the middle as lock rail reinforced by solid polymerbar of 200mm long at both end sabd screws from bothsides. The section frame will then be fitted in by PVC panels of size100 mmx20mm with wall thicknessof1.2mm(+/-0.2mm) and 2nos of 6mm dia and screws from both sides mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges/haspbolt / towerbolt /door ring are required to be strongenough to withstand wear and tear.Therateis inclusive of cost of all materials, labour,and hire of tools and plants and appliencies. Carriage of all materials taxesandall other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc |
| 102 | Supplying Godrej mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete. |
| 103 | Door stopper (Anodised aluminium) |
| 104 | Supplying, fitting and fixing Fan hook for ceiling with 1 mtr. Long 16mm dia rod complete including mending damages. |
| 105 | Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. With 1200 mm dia well. |
| 106 | Labour for boring tube well of required dia by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting & fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore. (a) For depth upto 150m for 50mm dia tube well with top enlargement of 100mm dia. (i) 50mm dia boring etc. |
| 107 | (ii) 100mm dia boring etc. top enlargement. |
| 108 | (b) For depth more than 150m for 50mm dia tube well with top enlargement of 100mm dia. 50mm dia boring etc. beyond 150 metre. |
| 109 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 & threaded to match with GI pipes as per IS:1239 (PART - I) PVC pipes (i) 50mm dia |
| 110 | (ii) 100mm dia |
| 111 | Supplying high density polythene strainer of approved make with adapter conforming to IS specification (50 mm dia). |
| 112 | Supplying fitting & fixing steel cutter piece up to 450mm long with socket 50mm dia. |
| 113 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution at work including hire and labour charges for tools and plants and sterilizing the equipment, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 114 | Supplying fitting & fixing 300mm housing clamp of approved quality. |
| 115 | Washing & developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with ‘V’ notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect. |
| 116 | Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. |
| 117 | Supplying, fitting & fixing check valve (horizontal) GM tested to 21 kg per sqcm. 32 mm. |
| 118 | Supplying,fitting and fixing (medium duty)conforming to ASTMD-1785 reducing socket. (i) 100mm x 50mm |
| 119 | Supplying fitting& fixing tubewell cover as per requirement at site. |
| 120 | Supplying fittings fixing submersible cable Finolex make I.S.I. size: 2.5sqmm |
| 121 | Supplying fittings & fixing KSB, Crompton Greaves or equivelent make submersible pump and motor set (75mm dia) 1.5HP, 220 volt with all necessary arrangements including loading unloading, transportation as per direction of engineer-in-charge (Payment will be made only after satisfactory performance of the pump & motor set for supply of water) |
| 122 | Supply & installation charges of control panel size 350 x 300 x 150mm complete with L&T make connectors 16 Amps. M.No. 2 over load relay with single phase preventor off and on switch, 3 nos. line fuse,3nos. Indicator lamps, volt meter, Push button, selector, switch Amp. meter with complete. |
| 123 | Providing 200mm centre guide with clamp. |
| 124 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification. |
| 125 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required) |
| 126 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Worka) 15mm.dia medium quality. |
| 127 | b) 20mm.dia medium quality. |
| 128 | c) 25mm.dia medium quality. |
| 129 | (b) For Concealed Worka) 15mm.dia medium quality. |
| 130 | b) 20mm.dia medium quality. |
| 131 | c) 25mm.dia medium quality. |
| 132 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80(mediumduty) conforming to ASTMD 1785 and threaded to match with GI Pipes as per IS:1239(Part-I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches upto1.5metre below surfaceinall sorts of soil and refilling the same as directed complete in all respect. (Payment will bemade on the centre linemeasurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)a) 32mm dia |
| 133 | Supply and carriage of 40mm crushed stone from nearest Rail Yard and its spreading as per instruction of the Eingineer-in-charge. |
| 134 | Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.). |
| 135 | ELECTRICAL WORKS: Supplying and Fixing , Connection Complete(including freight , insurance , incidental charges , taxes , Duties cess etc as applicable) of Four Pole 63 Amp changeover switch with SS Enclosure (Part-3) .it shall be fixed on side wall with mending civil damage good withsupply of necessary all require fixing , connection materials suitable size G.I fastener , nut & Bolts washer and copper socket etc to complete the job (in case of modification) (Make: Flora/Anchor/Havells/Crompton/Siemens) |
| 136 | Supplying and Fixing , connection complete of 63 Amp Switch Disconnection Fuse unit 3PN. It shall be fixed on side wall with mending civil damage good with supply of necessary all require fixing and connection materials suitabvle size G.I fastener , nut& Bolts , washer , Copper Socket etc to complete the job (In case of modification) (MAKE: Flora/Anchor/Havells/Crompton/Siemens) |
| 137 | Supply & Fixing , Connection complete of TPN Prewired Distribution board sheet steel phosphate powder painted MCBDBS Double Door with BUS BAR, neutral Link, Earth Bar , DIN Rail 16A with supply of necessary all require fitting & connection materials 63A TPN 4 pole MCCBS 01 no , SPN 16 Amp and 20 Amp MCBS 12 nos, suitable size prewired copper conductor, copper socket, GI fastener , nut & Bolts etc to complete the job. It shall be fixed on New Office Building in side wall with mending civil damage good(MAKE: Flora/Anchor/Havells/Crompton/Siemens)(In case of modification) |
| 138 | Supply , Fixing , Connection complete of 4 way Distribution Board Single Door Sheet Steel Phosphate powder painted with Busbar , Neutral link , Earth Bar, Din rail and SP &N 16 amp & 20 amp MCBS=04 nos with supply of necessary all require fixing and connection materials , suitable size GI fastener , Nut & Bolts , washer etc to complete the job (In case of modification) (MAKE: Flora/Anchor/Havells/Crompton/Siemens) |
| 139 | Supply & delivery with fittings fixing complete of single tubelight set make- philips 20W |
| 140 | Supply, delivery , fitting, fixing & electrical cnnection ( including freight , insurance , incidental charges , Taxes Duties , Cess etc as applicable) of 230/250 V AC, 50Hz Fan (Crompton/Havells) complete with blades , regulator, canopy,fork, rubber bush etc as followsa) Exhaust , light duty 300 mm sweep with protective guard |
| 141 | Supply, delivery , fitting, fixing & electrical cnnection ( including freight , insurance , incidental charges , Taxes Duties , Cess etc as applicable) of 230/250 V AC, 50Hz Fan (Crompton/Havells) complete with blades , regulator, canopy,fork, rubber bush etc as followsb) celling , 1200mm sweep, 3 blades |
| 142 | c) wall mounting fittings fan havels-make size-300mm (model-swing wall fan) |
| 143 | Supplying & fixing GI Modular Switch board of the following siz complete with 3 no suitable size copper bar with holes (for PH.N &E)fixed on bakelite / Hard rubber insulator over the MS welded chairs including top cover flashed in wall for houshing the board after cutting the Bricks wall inclu. making earthing attachment , painting & mending good damages to building works a) 8 Modules |
| 144 | Supplying & fixing GI Modular Switch board of the following siz complete with 3 no suitable size copper bar with holes (for PH.N &E)fixed on bakelite / Hard rubber insulator over the MS welded chairs including top cover flashed in wall for houshing the board after cutting the Bricks wall inclu. making earthing attachment , painting & mending good damages to building works b) 12 Modules |
| 145 | Supply, delivery, fitting, fixing & electrical connection ( including freight, insurance, incidental charges, Taxes, Duties, Cess etc, as applicable)of PVC Juction Box (ISI Marked) Suitable for juctioning |
| 146 | Supply & Fixing of 240V 6A modular type switch (Brand approved by EIC) on existing GI modular type switch board having top cover plate and making necessary necessary connecion as required |
| 147 | Supply & Fixing of 240V 6A 5pin Modular type plug Socket (Brand approved by EIC) with out Switch & plug top on existing GI modular type Switch Board with top cover plate and making necessary connection with PVC cu-wire & earth continuiity wire etc. |
| 148 | Supply, delivery, fitting, fixing & electrical connection ( including freight, insurance, incidental charges, Taxes, Duties, Cess etc, as applicable)of main switch of SPN, 240\250V, 50Hz, A.C.,MCB ( Havell's\Standard ) as follows a) 16 A |
| 149 | Supply, delivery, fitting, fixing & electrical connection ( including freight, insurance, incidental charges, Taxes, Duties, Cess etc, as applicable)of main switch of SPN, 240\250V, 50Hz, A.C.,MCB ( Havell's\Standard ) as follows b) 32A |
| 150 | Supply, delivery, fittings fixing & electrical connection (including freight, insurance incidental charges, Taxes, duties, cess etc as applicable) of Single Phase, 240V/250V, A.C. 50Kz, MCB Distribution Board (Havel's/L&T/Siemens/Flora) Ways-8 |
| 151 | Supply & Delivery fitting fixing & electrical connection (including freight, insurance incidental charges, Taxes, duties, cess etc as applicable) of Single phase, 240/250V, 50hz 15A, 5 pin plug socket with switch (Anchor) Including PVC switch board (ISI marked). |
| 152 | Supply & delivery with fittings fixing complete of casing (Pasto) 3/4 |
| 153 | Supply, delivery,wiring complete in PVC casing of suitable size ( including freight, insurance, incidental charges, Taxes, Duties, Cess etc, as applicable) by PVC insulated, unseathed, 11000V, A.C. grade, single core, flexible, copper core cables of diffrent sizes as follows including PVC insulated earth wire of similar size a) 6sq.mm. |
| 154 | b) 2.5 sq.mm |
| 155 | c) 1.0 sq.mm |
| 156 | d) 1.5 sq.mm |
| 157 | Supply, delivery, fitting, fixing & electrical connection ( including freight, insurance, incidental charges, Taxes, Duties, Cess etc, as applicable)of 3\\"x3\\" PVC connector box (ISI Marked) |
| 158 | Supply, delivery, fittings fixing & electrical connection (including freight, insurance incidental charges, Taxes, duties, cess etc as applicable) of (ISI marked) celling rose |
| 159 | Supply , delivery,fittings, fixing & electrical connection (including freight , insurance incidental charges , taxes, duties cess etc as applicable) of Metal Clad Main switch 415 V, 50 Hz AC TPN wall mounted type (Havell's/L&T/Siemens) |
| 160 | Supply & Delivery with Fixing of complete LED 40 watt on Parapet(wall) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender