Tender For Bhawan (Part-3):Construction Of Bhawan Bounday Wall Gate, Extention Of Boundary Wall Height, Front Portion Earth Filling, Laying Chequrered Tiles, Bhawan Brick Wall, Lintel, Door And Window Fitting Fixing With Frame,Shutter& Grill, Collaps
Tender Value
31.17 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
13 days left
EMD
62342
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Bhawan (Part-3):Construction Of Bhawan Bounday Wall Gate, Extention Of Boundary Wall Height, Front Portion Earth Filling, Laying Chequrered Tiles, Bhawan Brick Wall, Lintel, Door And Window Fitting Fixing With Frame,Shutter& Grill, Collapsible Gate, Floor Tiles, Wall Tiles, Step Finishing With Marble, First Floor 6 Nos Column, Half Stair, Landing, Wall Plaster, Painting, With Sanitary And Plumbing Works Etc Complete At Ch Asari G.P. Premises Under Matigara Development Block. Fund:-Osr/Ch /2025-26 & 2026-27.E-Nit No:-01/Cham/2026-27 (1St Call), Date :- 29.06.2026. Sl No:-01.
BOQ
| Sl. No. | Item Description |
| 1 | Item no-1::Earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m.as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.Depth of excavation not exceeding 1.500 m. |
| 2 | Item no-2::Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand |
| 3 | Item no-3::(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety |
| 4 | Item no-4::Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete . Including the cost of supply of sand .(payment to be made on measurement of finished quantity) |
| 5 | Item No:- 05 ::Controlled Cement Concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS 456 and relevant special publication submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of E.I.C consumption of cement will not be less than 300 kg of cement with superplasticiser per cu.m of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix formula. In ground floor and foundation (using concrete mixture M25 Grade) (ii) N.B.Variety (Stone Metal) |
| 6 | Item No:- 06::Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor).25 mm. to 30 mm. thick wooden shuttering as per decision & direction |
| 7 | (f) 25 mm to 30 mm shuttering without staging in foundation |
| 8 | Item No:- 08 :: Reinforcement for reinforced concrete work in all sorts of structures includ-ing distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m, (i) Tor steel/Mild Steel. II. JSW/JSPL/SHYAM/ SRMB / BMASL / ELECROSTEEL / SSL |
| 9 | Item No:- 09 :: Supplying and laying true to line and level vitrified tiles of approved brand (sizenot less than 600mm X 600mmX10 mm thick) in floor, skirt-ing etc. set in 20 mm sand cement mortar (1:4)and 2mm thick cement slurry back side of tiles using [email protected]./sqM or using polymerised adhesive (6mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth up to mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (A) Deep Colour & White |
| 10 | Item No:- 10 :: Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4nos. of key stones (10mm) fixed with araldite at theback of each tile & finishing the joints withwhite cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall, (b) Area of each tile above 0.09 Sq.m, (ii) Other than Coloured decorative including white |
| 11 | Item No:- 11 :: Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc.over 20 mm(av.) thick base of Cement mortar (1:2) laid with white cement slurry @4.4kg/Sq.m before plac-ing marble & jointed with white cement [email protected] kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering-in-Charge in GroundFloor.{White cement and Pigment to be supplied by the Agency]. (i) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m. |
| 12 | Item No:- 12 ::Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone. |
| 13 | Item No:- 13 ::Extra cost of labour for Marble Stone Floor in treads of Steps. |
| 14 | Item No:- 14 ::Brick work with 1st class bricks in cement mortar (1:6) .(a) In foundation and plinth |
| 15 | Item No:- 15 ::125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in Ground Floor. |
| 16 | Item No:- 16 ::125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in First Floor. |
| 17 | Item No:- 17 ::Supplying, fitting & fixing Zn-Alalloy (55% Al & 45 % Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550Mpa of trapizoidal profile of appro-ved make (excluding the supporting framework) fitted and fixed with 55mm & 25mm self tapping screw,EPDM Washer 16mm dia & 3mmth. washer etc. complete with 150 mm end lap and one corrugation minimum side lap.(Payment to be made on area of finished work). |
| 18 | Item No:- 18 ::Woodwork in door andwindow frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). b) Ordinary teak. |
| 19 | Item No:- 19 ::Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(a) Ordinary Teak Wood. |
| 20 | Item No:- 20 ::Collapsible gate with 40mmx40mmx6mm Tee as top and bottom guide rail, 20mmx10mmx2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set incement concrete and including cutting necessary holes, chasing etc. inwalls, floorsetc. and making good damages complete. |
| 21 | Item No:- 21 ::Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-in charge. |
| 22 | Item No:- 22 ::M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 23 | Item No:- 23 ::M.S. works in framed gratings of window etc. made of round or square bars and frame work or M.S. flats (with thebars securely fixed to the flat bar frame) with or with-out intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed. For Frame of Iron Door |
| 24 | Item No:- 24 ::M.S.gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, weld-ing, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.Iron Gate |
| 25 | Item No:- 25 ::Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface].(i) With 1:6 cement mortar, (c) 15 mm thick plaster, Outside. |
| 26 | Item No:- 26 :: (ii) With 1:4 cement mortar, (c) 10 mm thick plaster, Slab. |
| 27 | Item No:- 27 :: Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 28 | Item No:- 28 :: Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 29 | Item No:- 29 ::(b)Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) |
| 30 | Item No:- 30 :: Protective and Decorative Acrylic exterior emulsion paint of approved quality, as permanufacturer's specification and as per direction of Engineer-in-Charge to be applied over acryli cprimer as required. The rate includes cost ofmaterial, labour, scaffolding and all incidental charges but excluding the cost of primer. Outside |
| 31 | Item No:- 31 :: Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.(iii) Two coats.Inside |
| 32 | Item No:- 32 :: Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : (iv) Two coats (with any shade except white) |
| 33 | Item No:- 33 :: (b) On steel or other metal surface : (iv) Two coats (with any shade except white) |
| 34 | Item No:- 34 :: Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS : 1239 (Part-I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing material sand two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including allspecials. No separate payment will be made for accesories, specials.Payment for painting will be made seperately)-a) For Exposed Work-32 mm dia |
| 35 | Item No:- 35 :: 25mm dia |
| 36 | Item No:- 36 :: 20mm dia |
| 37 | Item No:- 37 :: 15mm dia |
| 38 | Item No:- 38 :: 100mm dia |
| 39 | Item No:- 39 :: Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap |
| 40 | Item No:- 40 :: Supplying, fitting and fixing 10 litre porcelain low-down cistern of approvedmakewitheither sideor bottominlet, sideoverflow, brackets complete with all internnal PVC fittings. |
| 41 | Item No:- 41 :: Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer-(c) 1500 litre capacity. |
| 42 | Item No:- 42 :: Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm |
| 43 | Item No:- 43 :: Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 44 | Item No:- 44 :: Supplying, fitting and fixing shower of approved brand and make (c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model Tropical / Sumthing Special of ESSCO or similar). |
| 45 | Item No:- 45 :: (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model Tropical / Sumthing Special of ESSCO or similar brand) |
| 46 | Item No:- 46 :: Wash basin vitreous china of approved make (with-out fittings) supplied, fittedand fixed inpositionon75mmX75mmX75mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii) 550 mm X 400 mm size |
| 47 | Item No:- 47 :: Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass-(i) 25 mm dia. and 450 mm long |
| 48 | Item No:- 48 :: Supplying and laying chequered tiles of any shade & of approved quality with (1:1½:3) cement concrete laid in panels or patterns as directed in pavement, footpath etc. including necessary underlay 25 mm thick [avg] cement mortar (1:3) complete in all respect with all labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for joint filling] Red Variety. (i) 25 mm. thick |
| 49 | GST @ Rs. 18% |
| 50 | Cess @ Rs.1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 days