Tender For Provision Of Certain Lbw Works At Icgs Kavaratti Under Ge (Navy) Lakshadweep
Tender Value
40.48 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
11 days left
EMD
80960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakshadweep District → Lakshadweep
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Lbw Works At Icgs Kavaratti Under Ge (Navy) Lakshadweep
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 depth and getting out in hard / dense soil for foundation etc. complete all as specified and as directed . |
| 2 | M&L PCC 1:4:8 type D2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed. |
| 3 | M&L PCC 1:2:4 type B2 by by using 40mm graded crushed stone aggregate as in foundations complete all as specified and as directed. |
| 4 | M&L RCC M-30 design mix ( using 20 mm graded aggregate) as in foundation including rafts footing, beams, plinth beams, base for columns. etc. complete all as specified and as directed. |
| 5 | M&L RCC M-30 design mix ( using 20 mm graded aggregate) as in column, pillars, piers, post and struts complete all as specified and as directed. |
| 6 | M&L RCC M-30 design mix ( using 20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. |
| 7 | M&L RCC M-30 design mix ( using 20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs etc complete all as specified and as directed. |
| 8 | Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed . |
| 9 | Mild steel CRS TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed complete all as specified and as directed |
| 10 | Use and waste of form work to sides of concrete foundation, footing, base of columns rafts and raft beams sides and soffits (if any) of foundation and plinth beams and similar work verticale or to bater, fair finished surfaces of concrete complete all as specified and as directed. |
| 11 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions of square or ractangular for fair finished surfaces of concrete complete all as spefified and as directed. |
| 12 | Use and wast of formwork to soffits of floor or roof beams, beam haunchings, girders, bressumers , lintels, cantilevers, shelves including supports, overhangs etc., also splays between floors and beamsfair finished surfaces of concrete complete all as specified and as directed. |
| 13 | Use and wast of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work flat for fair finished surfaces not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 14 | Pre -cast cement concrete block masonary with solid blocks exc 10 cm in width type C-1 1:3:6 (20mm graded stone aggregate) set in cement mortar 1:6 complete complete all as specified |
| 15 | M&L PCC 40 mm thick 1:2:4 type B0 by using 12.5mm graded aggregate as in damp proof course to horizontal or vertical surfaces including necessry form work complete all as specified and as directed. |
| 16 | Supply only liquid water proofing compound |
| 17 | M&L hardcore with broken stone aggregate of gauge n.exc 63mm deposited spread and levelled in layer not exc 15cm thick, watered and rammed to true surface complete all as specified and as directed . |
| 18 | M&L PCC 75 mm thick 1:4:8 type D2 by using 40mm graded aggregate as in subbase of floor complete all as specified and as directed. |
| 19 | M&L PCC 25 mm thick 1:2:4 type B1 by using 20mm graded aggregate as in floors including necessry form work complete all as specified and as directed. |
| 20 | M&L 75mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate finished even and smooth without using extra cement as in plinth protection and surface finished even and smooth without using exra cement including making necessary joint complete all as specified and as directed. |
| 21 | Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | Rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | Rendering 15 mm thick in cement mortar 1:4 in two coats 10mm thick and 5mm thick with mixing of water proofing compound as per manufacturer instructions on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid seperately as suplly only item |
| 24 | M & L Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 25 | M &L Glazed ceramic coloured disigner / concept tiles in vertical surfaces 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 26 | M & L 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid , rounded or chamfered, put together with glue pinned at joints complete as specified and as directed. |
| 27 | M&L factory made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, with both face commercial type complete as specified and as directed. |
| 28 | S& F for MS flat , angle, pipe for support brackets for rainwater pipe, hooks (stay), heavy, for large gates; hòok and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; and similarsmall articies conform to Fe-290 Gde -E-165 complete all as specified and directed. |
| 29 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22, 100 mm long, complete all as specified and as directed. |
| 30 | S & F 150mm long aluminium anodised barrel tower bolts,of extruded section complete all as specified and as directed |
| 31 | S &F aluminum anodised handle cast type of 150mm long complete all as specified and as directed. |
| 32 | S & F aluminum aodised sliding door bolts of 250mm long with hasp and staple(bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 33 | S&F aluminium powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame section of door, windows, ventilation, partion wall, cup board with one or more rebates including joinging cleats for fixing etc. complete all as specified and as directed. |
| 34 | S&F aluminium powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading,screws complete all as specified and as directed . |
| 35 | S&F aluminium powder coated grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed. |
| 36 | M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like set in cement mortar 1:4, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 37 | S&F Sheet glass 4.8mm thick selected quality in square exc 0.5 Sqm in each pane and glazing with putty complete all as specified and as directed. |
| 38 | S&F Sheet glass 3.0mm thick figured glass pin head type obscured or frosted on one side in square exc 0.5 Sqm in each pane and glazing with putty complete all as specified and as directed. |
| 39 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and as directed |
| 40 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed. |
| 41 | M&L heavy duty coloured chequred cement concrete tiles 30cmx30cmx25 to 30mm thick, lacquered finish set,jointed and pointed in neat cement slurry in floors with grey cement and pigments laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 42 | Preparation of new plastered surface of wall and applying two coats of distemper oil emulsion, ( ready mixed), of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete all as specified and as directed. |
| 43 | Preparation of newly plastered surface of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed . |
| 44 | M&L rendering 5 mm thick in cement mortar 1:3 with mixing of water proofing compound as per manufacturer instructions on RCC roof surfaces when it was green including preparation of surfaces by Fosroc Nitoprime PA-FS on Fosroc primer 195 and apply with water proofing treatment with FOSROC POLYUREA WPE 2.0 to 2.50mm thick consists of two main components part A &B complete all as specified and as directed. Note: WPC will be measured and paid seperately as suplly only item |
| 45 | Preparation of new plastered surface of ceiling and applying two coats of distemper oil emulsion, ( ready mixed), of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete all as specified and as directed. |
| 46 | Returning filling in, with excavated soils including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed . |
| 47 | Removing excavated material to a distance exc 1.5 KM but n. exc 5.0 KM and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed . |
| 48 | Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab for man holes / drainage / septic tank cover , set in cement mortar 1:4 including necessary from work complete all as specified and as directed.Note: Reinforocement shall be measured and paid seperately. |
| 49 | Pre -cast cement concrete block masonary with solid blocks not exc 10 cm in width type C-1 1:3:6 (20mm graded stone aggregate) set in cement mortar 1:4 complete all as specified and as directed |
| 50 | M&L rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 51 | S & F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed. |
| 52 | S & F 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed. |
| 53 | S&F fancy type Bib taps with flange cast copper alloy chromium plated with round operating knob screwed down high pressure, screwed for 15 mm bore pipe, complete all as specified and directed. |
| 54 | S & F 15 mm bore pillar tap chromium plated fancy type screwed down, high pressure screwed for iron pipe complete all as specified and directed. |
| 55 | S&F fancy type stop valve/ Angle valve cast copper alloy (ISI Marked) concealed type long body with round operating knob chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore dia complete all as specified and as directed. |
| 56 | S & F 15 mm bore concussive push button chromium plated cast copper alloy screwed for iron pipe complete all as specified and directed. |
| 57 | S&F 20 mm bore ball Gun metal globe or gate valves with brass wheel screwed both ernds for-pipe and fixed complete all as specified and as directed. |
| 58 | S&F 25 mm bore ball Gun metal globe or gate valves with brass wheel screwed both ernds for-pipe and fixed complete all as specified and as directed. |
| 59 | S&F 25 mm oore ball vallves nigh pressure of PTMT with epoxy coated Aluminium rod & high denisity plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 210 gms) |
| 60 | S&F CP waste coupling of 32mm dia ( half or full thread) complete all as specified and as directed. |
| 61 | S&F CP grating 100mm made out of stainless steel complete all as specified and as directed. |
| 62 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 63 | S&F 600 x 450mm bevelled edge mirror of selected quality glass 5mm tyhick polished mounted on 6mm thick AC building board fixed to walls complete all as specified and directed. |
| 64 | S&F plastic water closet seat, black, closed pattern with flat bottom including cover and mild steel chromium plated or aluminium hanging device complete all as specified and directed. |
| 65 | S&F corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 66 | S&F soap dish, fixed to walls with brass chromium plated screws complete all as specified and directed. |
| 67 | S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed. |
| 68 | S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 69 | S&F PVC waste pipe 32 mm dia, 750mm long suitable for kitchen/ WHB complete all as specified and as directed. |
| 70 | S&F vitreous china wash down water closet (pedestal pattern) white with 'P' or 'S' trap front or back inlet complete all as specified and directed. |
| 71 | S&F vitreous China wash basin, angle back, size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 72 | S&F vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 73 | S&F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and as directed |
| 74 | S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and as directed |
| 75 | S & F PVC (SWR) bend, 110 mm dia bore,any radius with acess door complete all as specified and as directed |
| 76 | S & F PVC (SWR) bend, 75 mm dia bore,any radius with acess door complete all as specified and as directed |
| 77 | S&F 20mm dia D type CP towel rail 600mm long between flanges complete all as specified and as directed. |
| 78 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling & fixing in opening complete all as specified and directed. |
| 79 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame at site complete all as specified and as directed . |
| 80 | S & F PVC ( SWR) 'P' trap suitable for 110/ 100mm bore of pipe complete all as specified and as directed. |
| 81 | Demolition wrought iron or mild steel work of any description by cutting rivets/bolts complete all as specified and directed |
| 82 | Taking down/ removal of Maverick Turf care fully and refixing the same with adhessive after concrete work in foundation complete all as specified and directed. |
| 83 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 84 | Excavation in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm soil complete all as specified and directed. |
| 85 | S&F Galvanised Iorn post joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc.in fencing post, strut bend to shape, holes drilled/notches cut to receive MS bolt and barbed wire embeded to concrete including tarring to steel work embeded to concrete and necessary welding as required complete all as specified and dirtected. |
| 86 | S&FGalvanised Iorn rolled flats for securing mesh as in fencing post,including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work complete all as specified and dirtected. |
| 87 | S&F SS steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, and washers, the other end enlarged and jagged or lewised, exc 30cm long complete all as specified and dirtected. |
| 88 | S&F Galvanised Iorn framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and dirtected. |
| 89 | M&L two coats of Epoxy spray paint of any colour over a coat ofprimer including preparation of new surfaces all as per manufactures instruction complete all as specified and as directed |
| 90 | Dismantling fencing wire mesh, any type and refixing chain link galvanised fencing including provn of line wire, staining bolt etc. And binding wire complete all as specified and directed. |
| 91 | Point wiring with PVC insulated unsheathed and multistranded copper conductor cable ISI marked, 1100 volt grade FRLS of size 1.5 Sqmm drawn in concealed suitable PVC rigid conduit with all fittings and accessories, fixing one MS pressed 1.6mm thock modular terminal box woth modular white plate of suitable size as required at site with PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected common earth dolly as specified for one light / fan point controlled by one switch complete all as specified and as directed . |
| 92 | All as per item No 91.00 here in before but 3 pin 5 amps switch socket out let on independent board |
| 93 | All as per item No 91.00 here in before but one 3 pin 5 amps switch socket on same board |
| 94 | All as per item No. 91.00 here in before but point wiring with 4.0 Sq mm single core stranded copper conductor and one run of 4.0 Sqmm copper conductor, stranded for earth wire for one switch socket out let point, 15/16 amps on the independent board |
| 95 | S & F modular switch, 1 way, 6A, 1 module complete all as specified and as directed . |
| 96 | S & F modular switch, 1 way, 16A, 1 module complete all as specified and as directed . |
| 97 | S&F modular socket, 6A, 2/3 pin combined 2 module complete all as specified and as directed . |
| 98 | S&F modular socket, 6/16A, 2/3 pin combined 2 module complete all as specified and as directed . |
| 99 | S&F ceiling rose 3 terminal 5 Amps 230 volts, PVC / Polycarbonate, insulated body complete all as specified and as directed . |
| 100 | S& F MCB SP, 6 to 32 Amps, 240 volts,10 KA, C curve complete all as specified and as directed |
| 101 | S& F MCB SPN, 32 Amps, 240 volts,10 KA, C curve complete all as specified and as directed. |
| 102 | S & F double door, sheet metal enclosure powder coated SPN DB 8 way with 200 Amps rated bus bar, 230 volt, IP 43 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed |
| 103 | S & F LED light fitting batten fitting 1x 20W, 220V, 4 feet, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed . |
| 104 | S & F LED light batten fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed . |
| 105 | S&F LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed |
| 106 | S&F Air circulator fan 230 volts single phase oscillating 450mm sweep suitable for wall mounting complete all as specified and as directed . |
| 107 | Earthing complete with galvanized iron earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the Galvanised iron earth lead wire 4.0mm dia, by means nut, bolt, check nuts and washer of Galvanised iron as earth lead protected by provision of GI light grade pipe 15mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement CI funnel wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exc 50 mtr all as per electrical plate No.3 of SSR Part I and connecting to earth test point and testing including dismantling of old earthing complete all as specified and as directed. |
| 108 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and as directed |
| 109 | Supply , laying, connecting and commissioning of LT UG cable 6 sqmm 4 core 1100 volts grade XLPE insulated armoured heavy duty electric cables with aluminium conductor including connecting with suitable size of cable glands lugs etc. laid in trenches or fixed on walls complete all as specified and as directed |
| 110 | S &F HDPE pipes of 40mm bore of pressure rating 6 kgf/ sqcm laid in trenches complete with all accessories such as Tees union , bend ,elbow nipple reducer etc etc as reruired for protection of UG cable on floor / pole complete all as specified and directed . |
| 111 | Supply and lay GI tubing 40 mm dia light grade ISI marked laid in trenches complete with all accessories such as Tees union , bend ,elbow nipple reducer etc etc as reruired for protection of UG cable on floor / pole complete all as specified and directed . |
| 112 | Cutting the existing road / hardstanding not less than 25cm in deep and 45cm in width for laying of underground cable / pipe and making good the disturbed surfaces with PCC 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender