Tender For Repair/Replacement To Existing Fencing/Chain Link & Barbed Wires With Painting And Other B/R Works In Tech Area At Af Stn Utarlai
Tender Value
15 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
13 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Existing Fencing/Chain Link & Barbed Wires With Painting And Other B/R Works In Tech Area At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old/unserviceable fencing with old/ unserviceable iron/rcc post along with old/unserviceable barbed wire /chain link fencing complete all as specified and directed . |
| 2 | M&L for Excavating in post holes (or similar holes) soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 3 | M&L for Cement concrete in foundations, filling and mass concrete Type D2 ( 1:4:8 ) ( 40 mm graded aggegate) complete all as specified and directed. |
| 4 | M&L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | S&F mild steel posts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and directed |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified |
| 7 | Supply only Chain link MS galvanisd fencing, any size or type of best quality conforming to IS all as specifed |
| 8 | S&F 10 mm dia & over mild steel round or square bars fixed behind fencing as guard bars etc and similar article complete all as specified and directed. |
| 9 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, of but exc 10 cm not exc 15 cm and dia of shak 11 to 15 mm complete all as specified and directed. |
| 10 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and MS sheets and similar work conforming to Fe.290.Gde-E-16 complete all as specified and directed by Eng -in-charge |
| 11 | Dismantling framed trusses n exc 10 Sqm complete all as specified and directed |
| 12 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 13 | S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 14 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 15 | S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 and including dismantling Complete all as specified and directed |
| 16 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed. |
| 17 | M & L for preparation of new steel surfaces of any description, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 18 | M & L for preparation of new steel surfaces of any description, n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender