Tender For Comprehensive Repairs To Tiling, Flooring, Plinth Protection, Roof Coverings And Sanitary Fittings At Certain Buildings At 5 Afh Under Ge (Af) Jorhat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs To Tiling, Flooring, Plinth Protection, Roof Coverings And Sanitary Fittings At Certain Buildings At 5 Afh Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.Notes : (i) Serviceable tiles shall be deposited to MES Store and shall be taken in Ledger.(ii) Ledger shall be verified at respective channel and attached with RAR/FB. |
| 2 | M&L for non skid coloured tiles, 7 to 8mm thick (Square/rectangular) polished, \\"light shade\\", area of each tile not exceeding 0.36 sqm, as in floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match with the tile laid, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 3 | M&L for non skid coloured tiles, 7 to 8mm thick (Square/rectangular), polished, light shade or any shade, area of each tile not exceeding 0.36 sqm, as in dado/skirting, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match the surfaces of tiles, over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 4 | M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (Square/rectangular), area of each tile exceeding 0.6 sqm but not exceeding 0.11 sqm, in floors, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match with the tiles, laid over and including 15mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 5 | M&L for glazed ceramic coloured tiles, fixed as on vertical surfaces, such as dado/skirting, etc., of size 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 6 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding layer of (1:3) cement mortar 20 mm thick for laying floor finishes complete all as specified and as directed. |
| 7 | M&L for machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado and pillar and including 15mm thick screed bedding rendering in cement mortar (1:4) complete all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors or pavings not exc. 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 9 | M&L for 40mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as on flooring, finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M&L for 25mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as on sub base complete all as specified and as directed. |
| 11 | M&L for plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in kerbs, coping, etc. including necessary formwork, weathering, slightly rounded or chamfered angles plinth protection and throating complete all as specified and as directed. |
| 12 | Dismantling of stone slab and tiles of any description or thickness in floors, footpath, aprons or in shelves, platform, etc. bedded and pointed in any mortar complete all as specified and as directed. |
| 13 | M&L for granite slab 18 to 20mm thick, machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polishing, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 14 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 15 | M&L for brick work in one brick thick wall with sub-class ‘B’ bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 16 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 17 | Taking down cement or cement lime plaster on brick or stone walls, ceilings, etc. including raking out joints, hacking for key scrubbing down with water, etc, complete all as specified and as directed. |
| 18 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol complete all as specified and as directed. |
| 19 | M&L for 15mm thick rendering of external surface in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound (WPC) @ 3% by weight of cement or as per manufacturer's instructions, finished fair and even without using extra cement complete all as specified and as directed.Note : WPC shall be measured and paid separately. |
| 20 | Supply only integral water proofing compound confirming to IS and as approved complete all as specified and as directed. |
| 21 | M&L for preparation of newly plastered surface of walls and applyig two coats of oil bound distemper over and incuding one coat of alkali resistant primer complete all as specified and as directed. |
| 22 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) of area n. exc. 1.5 Sqm each complete all as specified and as directed. |
| 23 | All as per Serial item No. 22 here-in-before but area exc. 1.5 sqm and not exc. 4 sqm each. |
| 24 | Taking down shutters of any description, area exc. 1 sqm but n. exc. 2 sqm each complete all as specified and as directed. |
| 25 | All as per Serial item No. 24 here-in-before but area not exc. 2 Sqm each. |
| 26 | Re-fixing shutters in same opening including taking down, easing and adjusting of any description of area exc. 1.00 sqm but n. exc. 2 sqm each complete all as specified and as directed. |
| 27 | Re-fixing shutters in same opening including taking down, easing and adjusting of any description of area n. exc. 1.00 sqm each complete all as specified and as directed. |
| 28 | Dismantling timber scantling, 40 sq.cm and over in section, in any position, in unframed work complete all as specified and as directed. |
| 29 | M&L for 2nd class hard wood timber scantling, clean sawn, timber framed work and fixed complete all as specified and as directed |
| 30 | M&L for 2nd class hard wood timber scantling, clean sawn, timber unframed work and fixed complete all as specified and as directed |
| 31 | M&L for 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and as directed |
| 32 | S&F pressed steel frames for doors of size 105x60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed |
| 33 | S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed |
| 34 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed . |
| 35 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 36 | S&F 30mm thick 2nd class hard wood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a); and fitted to chowkats complete all as per specified and as directed. |
| 37 | S&F 35mm thick factory made 2nd class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 38 | S&F solid PVC door frame of size 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, and fixing in opening as per specifications & drawing shown in SSR Part-II complete all as specified and as directed. |
| 39 | S&F factory made solid panel PVC door shutter, 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded palin colour PVC 'C\\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on on either side and as gap insert for top rail and bottom rail . Panellining of plain colour PVC sheet to be fitted in the MS frame welded /sealded to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specifications and shown on drawing in SSR Part-II complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 40 | S&F factory made solid panel PVC door shutter, 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded palin colour PVC 'C\\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on on either side and as gap insert for top rail and bottom rail . Panellining of plain colour PVC sheet to be fitted in the MS frame welded /sealded to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specifications and shown on drawing in SSR Part-II complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 days