Tender For Repair/ Maintenance To Security Walls, Concertina Coil, Gate Fencing And Connected Miscellaneous Works At installation Dronacharya Under Ge Fort Kochi
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
12 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance To Security Walls, Concertina Coil, Gate Fencing And Connected Miscellaneous Works At installation Dronacharya Under Ge Fort Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old rusted/ deteriorated concertina coil of any size and description from security wall complete all as specified and directed. |
| 2 | Supply and Installation of Stainless steel (304 Grade) Concertina coil of size 1000/1050 mm dia, cross type (when closed) high tensile spring centre core wire, with Steel strip (19.00mm wide and 0.50mm thick), spring steel core wire 2.6mm dia, Tensile strength- minimum 1620 N/Sqmm, Torsion test minimum 22 Turns, high carbon spring steel wire, fixing over existing security wall 'Y' shaped angle iron tied with SS wire complete all as specified and as directed. Make: (Shiva Engineering Co/ A1 Fence & Global Technocrats or equivalent) |
| 3 | Supply and fixing in repairs Stainless steel (304 Grade) Rozer wire mat finish, high tensile spring centre core wire, with Steel strip (19.00mm wide and 0.50 mm thick), Steel core wire 2.6mm dia (+/- 0.035 mm), Tensile strength- minimum 1620 N/Sqmm, Torsion test minimum 22 Turns, High carbon spring steel wire, complete all as specified and as directed. |
| 4 | Taking down old existing concertina coil any size and description from security wall and Re-fixing the same at its position or other location with 3mm dia GI binding wire/clips complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work or of any description at any place not otherwise described complete all as specified and as directed. |
| 6 | Material and labour for Galvanized Iron angle, for fencing post ('Y' shape/ swan neck etc) fixing over security wall including cutting and welding, drilling holes, nut bolts, notching for wire etc flat iron including necessary bolting or riveting and similar works, complete all as specified and as directed. |
| 7 | Dismantling old chain link fencing wire mesh, any type from existing fencing posts, complete all as specified and as directed. |
| 8 | Supply only galvanised steel chain link fencing of mesh size any size or type with both ends of the fabric without knocking and twisting any size including binding wire complete all as specified and directed. Make: (Shiva Engineering Co/ A1 Fence & Global Technocrats or equivalent) |
| 9 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, including binding wire etc and fixing to fencing post with nut, bolts, flat iron rails, straining bolts, etc. all as specified and as directed. Note: Flat iron and MS nut bolts shall be measured and paid separately. |
| 10 | Supply and fixing GI flat Iron, galvanized for securing chain link fencing, wind tie, welded to each other complete all as specified and as directed. |
| 11 | Supply and fixing mild steel screw bolts (machine made) 5 to 10mm dia of neck and length exc 5cm but not exc 10cm, with hexagonal or square heads at one end and screwed ends fixed with two washers and one nut complete all as specified and as directed. |
| 12 | Material and labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 13 | Material and labour for preparation of new steel surfaces not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 14 | Material and labour for Mild steel Framed work as in gates, framed guard bars, MS Plates for Gates, barred iron doors, ladders of angle or other section with gusset plates, rails, braces, etc. framed and hung as gates, including heavy duty gate hinges, stops, hand-made sliding bolts, steel sheeting or other covering etc complete, all as specified and as directed. |
| 15 | Material and labour for cast iron ornamental designs (Shapes and designs as approved by User) for fixing to Gates including welding etc complete, steel sheeting or other covering. etc. |
| 16 | Demolition of cement concrete (unreinforced) ground floors and pavings of any description and in any position not exc 15 cm thick below or above ground level including disposal of debris out of premises complete all as specified and ass directed. |
| 17 | Material and labour for PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in haunching, coping, and securing hold fasts/fencing post, flooring/ hard standing, Ramps including necessary form work complete all as specified and as directed. |
| 18 | Demolition of brick work or concrete blocks wall of any description and in any position built in cement mortar including all quoins, arches pillar etc. including disposal of rubbish complete all as specified and as directed. |
| 19 | Material and labour precast cement concrete 1:3:6, type C-1 (using 12.50 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 etc. complete all as specified and as directed. |
| 20 | `-Ditto- all as per item No 19 here-in-before but, except brick/concrete blocks, using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and as directed. |
| 21 | Material and labour for 15mm thick rendering on fair face of brick/ concrete block walls in cement mortar (1:4) surface finished even and fair without using extra cement complete all as specified and as directed. |
| 22 | Material and labour for 15mm thick rendering on fair face of brick / concrete block walls in cement mortar (1:4) surface finished even and fair including Taking down cement plaster on brick / concrete block surfaces including raking out joints hacking for key, scrubbing down with water etc and prepared to the plaster complete all as specified and as directed. |
| 23 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint UV resistance Alkali & fungal resistance, dirt resistance exterior paint of dark/required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 24 | Preparation of old decorated surfaces of wall and applying a coat of 100% Premium acrylic emulsion paint UV resistance Alkali & fungal resistance, dirt resistance exterior paint of any dark/required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including filling all the cracks, holes and depressions with cement based putty complete all as specified and as directed. |
| 25 | Complete removal of existing treatment on walls (any number of layers) by scrapping with mechanical steel scrappers, including filling the cracks/depressions with wall care putty and applying two coats of 100% Premium acrylic emulsion paint UV resistance Alkali & fungal resistance, dirt resistance exterior paint of dark/required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 26 | Material and labour for preparing old painted steel & iron surfaces like fencing posts, Gates & Parking sheds, truss etc removing all scales, rust with mechanical wired grinder, over 10cm in width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed. |
| 27 | Complete removal of existing treatment over steel surfaces removing all scales, rust with mechanical wired grinder and Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces of fencing post, gates etc over 10 cm width or girth complete all as specified and as directed. |
| 28 | Dismantling Stone slabs and tiles, paver blocks of any description or thickness aid dry or pointed in floors, aprons etc. complete all as specified and as directed. |
| 29 | Material and labour for 18mm thick Granite (of any colour/type) work rounded and polished at edges as in Gate pillars, step, jambs, wall lining (veneering to wall), platforms etc in neat cement paste and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick plaster in cement mortar 1:4, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender