Tender For Provn Of Alternate Entry/Exit Gate And Security Shed At Vijay Baugh And Other Revenue/Minor Works At Nsry (Svp) Under Ge Haddo,Sri Vijaya Puram
Tender Value
43.35 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
14 days left
EMD
86700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Alternate Entry/Exit Gate And Security Shed At Vijay Baugh And Other Revenue/Minor Works At Nsry (Svp) Under Ge Haddo,Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in width and getting out in Hard Dense soil complete all as specified and directed |
| 2 | Excavating in trenches, beyond 1.5 m and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in width and getting out in Hard Dense soil complete all as specified and directed |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out in Hard Dense Soil complete all as specified and directed |
| 4 | Returning, filling in soil incl levelling watering and well ramming in layers n.exc .25cm in fdn trenches complete all as specified and directed |
| 5 | Removing excavated soil to a dist n.exc 50m and depositing where directed at a level n.exc.1.50m complete all as specified and directed |
| 6 | M&L for PCC type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and as directed.. |
| 7 | S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P. brass/ stainless steel screws, all complete as specified and as directed. |
| 8 | S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed.Note- Supply only of ACP sheet/glass/alluminium alloy wire cloth for doors and windows to measured and paid separately. Fixing of glass, ACP sheet are included in this item. |
| 9 | S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long in PVC doors complete all as specified and directed |
| 10 | S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified and directed |
| 11 | S&F aluminium anodised barrel tower bolt all as above but 75mm long complete all as specified and as directed.. |
| 12 | Supply only plain sheet glass 4.0 mm thick ordinary quality not exc 0.5 Sqm in each pane complete all as specified and directed |
| 13 | Supply only Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed to aluminium doors complete all as specified and directed |
| 14 | Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 15 | Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples complete all as specified and as directed. |
| 16 | M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) complete all as specified and directed |
| 17 | M&L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed. |
| 18 | Supply only Liquid water proofing compound complete all as specified and directed |
| 19 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and directed |
| 20 | M&L for cement concrete 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, and the like including weathering, slightly rounded or camfered angles and throating including necessary formwork complete all as specified and directed |
| 21 | M&L for Mild steel bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 22 | M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and directed. |
| 23 | M&L for preparation on newly plastered external wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces complete all as specified and directed |
| 24 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed |
| 25 | S & F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 26 | M&L for aluminium wind tie of any size fixed with self tapping screw with integral EPDM washer in roof covering complete all as specified and directed |
| 27 | S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550 Mpa as in roof overing /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 28 | M&L for broken stone or boulders hard core of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface complete all as specified and directed |
| 29 | M&L for rough finished machine pressed precast concrete interlocking paver block of size 200x200 of square shape of black and grey colour in combination and with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness, M-40 Grade laid dry to any pattern or profile as directed incl filing to the edges in CM 1:4 all manufacturer's instruction complete all as specified and directed |
| 30 | M&L for sand filling under floors or in foundation including watering and consolidation incl spreading and levelling complete all as specified and directed |
| 31 | M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 32 | M&L Chequered cement concrete tiles (glossy finish) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors, over and Including 20mm thick screed bed in CM 1:6 etc all as specified and as directed. |
| 33 | M&L for mild steel ornamental work as in intricate design gate, fabricated out of M S rolled sections, tubes, square, plain and twisted bars, hand made aldrop bolts, tower bolts and hinges to suit the design including fixing the gate with MS frame work all as directed and conforming to Fe-290.Gde-E-165 complete all as specified and directed |
| 34 | M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed |
| 35 | Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed. |
| 36 | M&L for cement concrete Type C-1, 1:3:6 (using 20 mm graded stone aggregate) in post foundation, foundation and mass concrete all as specified and directed |
| 37 | M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed. |
| 38 | M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) 75mm thick as in levelling course, sub-floors and paving etc complete all as specified and as directed. |
| 39 | M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and as directed. |
| 40 | S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 41 | S & F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed. |
| 42 | M & L for Anodised aluminium snap grid frame work for false ceiling 605mm x 605mmusing aluminium anodized sections specified in SSR part-I 1991 including cutting, drilling jointing etc complete including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including Providing 6mm thick E-boards classic 605mm x 605mm size at any height upto 12m with necessary scaffoldings etc complete all as specified and as directed |
| 43 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 45 | S&F Aluminum alloy powder coated sliding door bolt 200mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed. |
| 46 | S&F aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 47 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or floors etc using synthetic rubber adhesive cement solvent complete all as specified and as directed. |
| 48 | S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 49 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 50 | S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls or in floors etc using synthetic rubber adhesive cement solvent complete all as specified and as directed. |
| 51 | S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and as directed. |
| 52 | M&L PVC (SWR) floor trap 75mm with grating including jointing with solvent cement complete all as specified and as directed. |
| 53 | S&F in vitreous china wash hand basin,white, flat back of size 450x 300 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, waste pipe and all necessary inlet, out let connections complete all as specified and as directed. |
| 54 | S&F 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts etc complete all as specified and as directed. |
| 55 | S&F Health faucet (ABS Body) Fancy type mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 56 | S&F15mm dia CP Angle cock with flange fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed. |
| 57 | S&F 15mm dia Two way bib taps long body with flange cast copper alloy chromium plated fancy type with capstan head handle screwed down for Iron pipe or for brass ferrule etc complete all as specified and as directed. |
| 58 | S & F vitreous China bowl urinal flat back, of size 465x355x265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, buttiing urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with and including 32mm dia waste pipe in low density polyethylene (LDPE) of pressure rating 6 kgf/sqcm of 1.0 metre length, PVC connections 15mm size with PTMT nuts of length 450mm, concussive push button taps 15mm dia or bore, cast copper alloy, screwed for iron pipe, urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified and as directed. |
| 59 | S&F Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 60 | S&F PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified and as directed. |
| 61 | S&F Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange etc complete all as specified and as directed. |
| 62 | S&F Bevelled edge looking mirror 600 x 450 mm of selected quality glass, mounted on 6mm thk AC bldg board or commrcial ply wood & fixed to wooden plugs with CP catch nuts complete all as specified and as directed. |
| 63 | Supplying and laying of 20 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 64 | Supplying and laying of 25 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 65 | S&F 20mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends suitable for CPVC pipes etc complete all as specified and as directed. |
| 66 | Cutting chases in PCC block or Brick or stone walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge. |
| 67 | S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge. |
| 68 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge. |
| 69 | M&L PCC 1:3:6 type C2 using 40mm aggregate for Concrete bed to 160 mm dia drain pipes of including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed. |
| 70 | S&F UD PVC drainage pipes (SJ Type) S165/SN8/SDR34 160mm dia in any length with rubber ring joints laid in trenches all as complete all as specified and as directed. |
| 71 | M&L for PCC 1:2:4 type B2 as in surface channel and drain & benching of manhole and finishing even and smooth without using extra cement complete all as specified and as directed. |
| 72 | M&L for providing precast cement concrete cover slabs for drain in RCC 1:2:4 type B1 (using 20mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed. |
| 73 | M&L for deformed TMT steel bars 10mm dia and over cut to length, bent to shape required , including cranking, bending with MS wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 74 | M&L for deformed TMT steel bars 5mm dia and over as in stirrups and cut to length, bent to shape required, including cranking, bending with MS wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 75 | M&L for RCC (Nominal Mix) Type B1 1:2:4 (20 mm graded aggregate) in lintels, beams etc complete including necessary formwork all as specified & directed. |
| 76 | M&L for aluminium composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed over frame made up of aluminium hollow section of 25x50mm, 2.0mm thick, duly fixed to wall/ceiling with expansion fastener having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in columns, beams, walls etc complete all as specified and as directed. Note : Necessary scaffolding required for the work upto three storeyed Bldg shall be deemed to include in the unit rate quoted |
| 77 | S&F 1.0mm thick stainless steel box type writing letters (Block, Roman, Italic or Indian) of size 1000mm height, 200mm to 250mm width & 300mm to 350mm depth fixed to both bottom and wall surfaces including necessary drilling / punching in walls & incl necessary screws,sealant etc complete all as specified and directed. |
| 78 | Supply, Install and erect steel tubular swaged pole type 410 SP-55 of 9.00 mtrs long complete with cast iron base plate finial taper plug, pole cap, bolts, nuts and washers pole made out of MS tubing confirming to IS-2713 Part-II, including drilling of holes painting with two coats of bituminous paint internally and externally embedded portion upto ground level ground/concrete and painting to exposed surfaces with two coats aluminium paint and one coat of red oxide primer complete all as specified and directed.Note :- Excavation/Earth work in any type of soil/ strata PCC foundation, coping of poles, cross arms, clamps shall be measured and paid separately.Make :- M/s Bombay Tubes/ M/s Jindal Steel Products/ M/s India Tubes Co/ M/s Bharat poles/ National Tubing |
| 79 | Supply and fixing of LED street light fixture of cap 70 watt ,aerodynamically designed for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy > 110/120 LPW, with 10KV SPD all as specified and directed. Make: CG Model No :TRP-409-70-57-SL-GL-NSG or equivalent model of /Philips/ Havells/ Luker |
| 80 | Supply, laying, testing and commissioning of underground LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 2 core x 10 sqmm (laid in terenches,ducts,pole,wall etc.) all as specified and directed. |
| 81 | Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 40 mm (OD) x 32 mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. |
| 82 | Material and Labour for cutting existing BT / PCCroad of size 45cm x 60cm for taking out/laying of underground cable/pipe and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and as directed . |
| 83 | Supply & fix Cable Junction Box of size 130 x 180 x 77, IP 66 (Grey) with integrated membranes / metric knockouts for cable entry of size 2.5 sqmm to 6 sqmm twin core with earth, Lighting Outgoing cable: 2C x 10 Sq.mm cable, Degree of protection: IP66, Material: PC-GFS (polycarbonate) , Weatherproof, resistant to weather influences all as specified and directed. Make : Hensel model No DK 1010 G or equivalent. |
| 84 | S & F PVC Insulated and PVC Round Sheathed 2 core 1.5 sqmm Bright Annealed Bare Copper Conductor Heavy Duty Flexible Cables for Voltage Grade 1100 Volts for connection of lights from junction box complete all as specified and directed by Engr In Charge. |
| 85 | Supply and fixing of outdoor type Decorative Post top for 360° indirect light with IP 65 protection, resistant to impact and corrosion of 240 v,50hz of capacity 40 watt LED suitable for mounting on 60 mm OD pipe on necessasry PCC works complete all as specified and directed. |
| 86 | M&L for street light mounting bracket made up of 32 mm dia galvanised steel tubing, medium grade, 1.20 metres long, bent to shape with inner angle not less than 120°, with and including necessary fixing clamps fabricated out of flat iron of size 50 x 6 mm, bolts, nuts and washers as required and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. |
| 87 | Supply and fixing pipe galvanized, “Medium class”, including fittings 50 mm dia incl two coat of synthetic enamel paint onar one coat of primer complate all as specified and directed by Engr In Charge. |
| 88 | M & L point wiring for One light/fan point controlled by one switch 5 Amps one way complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified and as directed.:-Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab. |
| 89 | M & L point wiring for one modular 3 pin 5 Amp socket out let on independent board complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified and as directed.:-Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab. |
| 90 | M & L point wiring for 3 pin switch socket outlet , 5 Amps on same board complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified and as directed.:-Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab. Note for item no 88,89,90 :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 91 | S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 92 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed. |
| 93 | Supply & fixing for ceiling rose, 3 phase, PVC polycarbonate, isolated body complete all as specified and directed. |
| 94 | S & F and testing LED Tube light fittings aluminium tubes 22 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT522 or equivalent to CG/Philips Havells |
| 95 | Supply & fixing Wall mounting fan 400 mm sweep, 2100 RPM, 110 Watt incl all fixing arrangement complete all as specified and directed. Make: CG Model No : 400mm TORPEDO (HS) 2100RPM or equivalent to Luker/ Usha/ Orient |
| 96 | S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 4 ways and making good to the distrubed surface /walls complete all as specified and directed. |
| 97 | S & F MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. |
| 98 | S & F MCB SP 06-32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed .Note:Termination of all wiring in to MCBs/ MCCBs/DBs shall be through copper lugs/thimbles of adequate size. |
| 99 | S & F and testing LED Tube light fittings aluminium tubes 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT510P or equivalent to CG/Philips Havells |
| 100 | Supply and fix exhaust fan heavy duty, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. Make: CG /Havells /Orient / Usha/ Khaitan |
| 101 | M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed.NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type RCC chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender