Tender For Repair / Replacement To Joinery, Flooring Plastering Including Internal Water Supply To Em Installations At Mil Stn Sgnr
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement To Joinery, Flooring Plastering Including Internal Water Supply To Em Installations At Mil Stn Sgnr
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all specified and directed. |
| 2 | M&L for 450x350 x7 mm thick glazed ceramic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and including 10mm thick backing coat in CM 1:4. complete all specified and directed. |
| 3 | M&L for Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and including 15mm thick screed in CM 1:6 complete all specified and directed. |
| 4 | M & L for machine cut kota stone slab flooring 18-20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm of screed bed in CM 1:6 complete all specified and directed. |
| 5 | M & L for machine cut kota stone slabs as in vertical surfces such as risers of steps 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing and moulding edges including 10mm of backing coat in CM 1:4, complete all specified and directed. |
| 6 | M & L for 15-18mm thick granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm of screed bed in CM 1:6 complete all specified and directed. |
| 7 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of roof sheet (corrugated, semicorrugated or plain etc) complete all specified and directed. |
| 8 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in replacement complete all specified and directed. |
| 9 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all specified and directed. |
| 10 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heaving bracket framing (beam, tee, angle, channel or flat sections), gates, railing including distance pieces, cleats and brackets etc complete all specified and directed. |
| 11 | Demolition of cement concrete in ground floors and pavings n. exc 15 cmthickness (below or above ground level) complete all specified and directed. |
| 12 | M&L for 75 for mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in filling / sub base as in floors, sub floor etc finished even and smooth complete all specified and directed. |
| 13 | M&L for 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all specified and directed. |
| 14 | S&F 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all specified and directed. |
| 15 | M&L for precast cement concrete PCC (1:2:4) type B-1 with 20 mm graded aggregate for kerb stone and similar works with plain fair finishes including chamfers, weatherings, throating etc. and setting in mortar (1:4) complete with joints to match including demolition of existing cement concrete complete all specified and directed. |
| 16 | M & L for 75mm thick cement concrete type C-1, 1:3:6 (using 20mm graged aggregate) as in plinth protection laid in panels and filling joints complete all specified and directed. |
| 17 | M&L for 300mm x 300mm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm of screed bed in CM 1:4 complete all specified and directed. |
| 18 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brick work built in cement mortar of any description including dismantling existing brick work complete all specified and directed. |
| 19 | M&L for 15mm thick rendering in CM 1:6 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement including raking out joints, hacking for key and scrubbing down with water etc complete all specified and directed. |
| 20 | M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brickwork/ concrete wall surfaces finished even & smooth without using extra cement etc complete all specified and directed. |
| 21 | Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all specified and directed. |
| 22 | M&L for 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all specified and directed. |
| 23 | M&L for 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as on ceilings finished even and smooth without using extra cement complete complete all specified and directed. |
| 24 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over chalk whiting primer with putty finish complete all specified and directed. |
| 25 | M&L for applying two coats of cement based paint over cement base primer with putty finish including preparation of newly plastered surfaces of walls ccomplete all specified and directed. |
| 26 | M&Lfor three coats of white wash to new surfaces on ceilings including preparation of surface complete all specified and directed. |
| 27 | M&L for two coat of cement base paint to old surfaces of walls including preparation of surfaces with putty finishes complete all specified and directed. |
| 28 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm and putty finish) complete all specified and directed. |
| 29 | M&L for complete removal of existing treatment and finishing walls with Acrylic Smooth exterior paint of required shade over old painted surfaces (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm and putty finish) complete all specified and directed. |
| 30 | M&L for two coats of oil distempering over old decorated surfaces of wall after complete removal of existing treatment including preparation of surface complete incl chalk whites with putty finishes complete all specified and directed. |
| 31 | M&L for two coats of white wash to old surfaces of ceilings including preparation of surface with putty finishes complete all specified and directed. Please Enable Macros to View BoQ information |
| 32 | M&L for two coats of white wash to old surfaces of ceilings including preparation of surface with putty finishes complete all specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender