Tender For Special Repairs To Hardstanding In Between Map Quarters And Joinery & Cupboards Of Building No. P-92 At Vijay Baugh Under Age B/R-Ii, Ge Haddo,Sri Vijaya Puram
Tender Value
48 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
18 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Hardstanding In Between Map Quarters And Joinery & Cupboards Of Building No. P-92 At Vijay Baugh Under Age B/R-Ii, Ge Haddo,Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each all as specified and as directed. |
| 2 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed. |
| 3 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified and as directed. |
| 4 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant fixed with necessary full body threaded star headed counter sunk S.S screws etc., including taking down old cupboards complete all as specified and as directed.NOTE:-Fitting shall be measured measured seperately under following items , All joint should be filled with sealant |
| 5 | S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length etc., complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 6 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item) |
| 7 | S&F for contunoius (piano) hinges , mild steel , bright finish or electrogalvanished and width of flaps 30 mm (when open) etc., complete all as specified and as directed. |
| 8 | S&F for 150 mm long Brass handles, cast type, polished bright etc., complete all as specified and as directed. |
| 9 | S&F for 75 mm size hasp and stable , safety type , brass with mild steel hinges pin including bolt to hinge plate with scrows etc., complete all as specified and as directed. |
| 10 | S&F for Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm etc., complete all as specified and as directed. |
| 11 | S&F for extruded aluminium alloy powder coated handles fabricated types, each 100mm long in aluminium doors etc., complete all as specified and as directed. |
| 12 | S&F for Aluminum powder coated barrel tower bolt of extruded section 150mm long in aluminium doors etc., complete all as specified and as directed. |
| 13 | S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified and as directed. |
| 14 | S&F for Aluminum alloy powder coated sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc., complete all as specified and as directed. |
| 15 | S&F stainless steel sliding door bolt of 200 mm size, bright finished, complete with all necessary screws and fixing arrangements complete all as specified and as directed. |
| 16 | S&F stainless steel tower bolt of 200 mm size, bright finished, complete with necessary screws and fixing arrangements complete all as specified and as directed. |
| 17 | S& F stainless steel door handles (pair) of approved make, bright finished, complete with necessary screws and fixing arrangements complete all as specified and as directed. |
| 18 | S&F stainless steel butt hinges made of high-quality stainless steel, suitable for wooden / metal doors, shutters, cabinets, and windows. Hinges shall be corrosion-resistant, durable, and smooth in operation. The hinges shall be complete with necessary stainless steel screws, properly aligned and fixed to ensure easy movement and long service life complete all as specified and as directed. |
| 19 | S&F aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 20 | Supply only Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed to aluminium doors complete all as specified and directed |
| 21 | Taking down and removing all scrub, vegetation, weeds and roots from cracks, crevices, joints and similar locations in walls, roofs, floors and other surfaces, applying approved herbicidal chemical treatment to prevent regrowth, and making good disturbed surfaces with PCC 1:2:4 or cement plaster 1:4 mixed with approved waterproofing compound as required, including cleaning, disposal of debris, labour, materials, tools, tackles, safety precautions and all incidental works complete, all as specified and directed. |
| 22 | Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed. |
| 23 | M&L for 100mm thick PCC 1:3:6 Type C-2 (using 40mm crushed stone aggregate) as in plinth protection finished even and fair without using extra cement etc., complete all as specified and as directed. |
| 24 | Providing and laying vitrified parking tiles of sizes (600X600) of 10-15 mm thickness conforming to IS 15622 in all colors and shades in outdoor floors and skirting meant for parking of cars and trucks,set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in CM (1:4) etc including dismantling old tiles complete all as specified and as directed. |
| 25 | Demolition of precast concrete work built in cement mortar including all quoins arches pillars etc., complete all as specified and as directed. |
| 26 | M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls Type C1 1:3:6 (20mm graded aggregate) and setting in cement mortar 1:6, etc., complete all as specified and as directed. |
| 27 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key etc., complete all as specified and as directed. |
| 28 | M&L for rendering 10 mm thick plaster in CM (1:4) on concrete or block masonry surfaces including mixing water proofing compound as per manufactures instructions (or 3% by weight of cement) and finishing the top surfaces even and fair etc., complete all as specified and as directed. (Note :Water proofing compound shall be measured and paid seperately under relevant item of this schedule as supply only). |
| 29 | Supply only water proofing compound ISI marked etc., complete all as specified and as directed. (Note : WPC may apply as per manufactures instructions or 3% by the wt of cement). |
| 30 | M&L for preparation of new plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm Anti algie weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m and including scaffolding and safety arrangements etc., complete all as specified and as directed.Make :- Asian Apex Ultima and Equivalent |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 32 | M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. etc., complete all as specified and as directed. (considered for Railing on balcony /staircase portion at any postition) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 days