Tender For Special Repairs To Chequered Tile, Hardstanding And Other Connected Works Near Bldg No T-76 At Jal Vihar & T-182, T-183, T-184, T-185 And T-186 At Ancom Under Ge Haddo, Sri Vijaya Puram.
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
18 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Chequered Tile, Hardstanding And Other Connected Works Near Bldg No T-76 At Jal Vihar & T-182, T-183, T-184, T-185 And T-186 At Ancom Under Ge Haddo, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 2 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders |
| 3 | M & L for providing 100 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors |
| 4 | M&L chequered Cement concrete tiles 30cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed including dismantling old tiles all as specified and directed. |
| 5 | M & L for Non-Skid heavy duty vitrified tiles of size 600 X 600 10-12 mm thick, or high dimension of any colour any design Durastone, weather proof impact resistant, abrasion resistant exterior tiles, as in floors vertical cladding and etc , set and jointed in neat cement slurry over and pointed in white or coloured cement to match, over 15mm thick screed bed in CM (1:4) including dismantling of old tiles complete all as specified and as directed. |
| 6 | M&L for heavy duty Non skid vitrified tiles of size 300x300x9-10mm thick or high dimension (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 including dismantling of old tiles complete all as specified and as directed |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 8 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed |
| 9 | Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed. |
| 10 | M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stoneaggregate), exc. 10cm in width, set in CM 1:6 all as specified |
| 11 | M & L for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in filling, foundation and mass concrete complete all as specified and as directed. |
| 12 | M&L cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in coping including necessary formwork. |
| 13 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 14 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:4 |
| 15 | Material & Labour for preparing newly plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and as directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 17 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed |
| 18 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed |
| 19 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified and as directed. |
| 20 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or aluminium composite panels or insulation boards/slabs/blankets/aluminium composite panels, any thickness, including cover fillets complete all as specified and directed |
| 21 | S&F for Powder coated aluminum snap grid frame work for false ceiling incl hangers 6mm dia, GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed |
| 22 | M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed |
| 23 | M & L for Aluminium composite panel sheet of 3mm thick of any colour or design with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30 micron fixed with Angles or MS or SS Flats etc for by screws/ bolt & nuts etc for View cutter in approved pattern etc complete all as specified and as directed. |
| 24 | M&L for mild steel work as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed |
| 25 | M&L for framed work such as grills, gratings, etc,. With ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars, barred iron doors ladders including portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts for ornamental and intricate design as specified and directed |
| 26 | S & F 8mm thick fibre cement plank ( size 3.00 x 0.15m ) of any colour fixed in position with suitable screws/ fasteners as per manufactures instructions on aluminium/ mild steel work in wall cladding including applying two coats of exterior emulsion paint over one coat of primer on fibre planks including dismantling of old plank complete all as specified and as directed. Note: Aluminium/ Mild steel work shall be measured and paid seperately. Make : Sheera of M/s Mahaphant Fibre cement (South Asia) Pvt Ltd or its equivalent as approved by GE. |
| 27 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any n exceeding 4 Kg/ Sqm complete all as directed by Engr-in-Charge |
| 28 | M&L for mild steel galvanised PVC coated chain link fencing 3.15mm nominal dia of GI wire, 1.4mm thick PVC coating and average area of aperture 25 sqcm with weight of chain link not less than 2.5 Kg/Sqm complete all as specified and as directed |
| 29 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers not exceeding 25 cm in hard/dense soil |
| 30 | M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 31 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 32 | M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender