Tender For Special Repairs To Joinery & Cupboards Of Building No P-91 At Vijay Baugh, Provn Of Sittting Benches In Common Areas Of Vijay Baugh And Provn Of Oem Support Complex Behind Electrical Workshop At Nsry (Svp) Under Ge Haddo, Sri Vijaya Puram
Tender Value
43.45 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
12 days left
EMD
86900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Joinery & Cupboards Of Building No P-91 At Vijay Baugh, Provn Of Sittting Benches In Common Areas Of Vijay Baugh And Provn Of Oem Support Complex Behind Electrical Workshop At Nsry (Svp) Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each all as specified and as directed. |
| 2 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and as directed. |
| 3 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified and as directed. |
| 4 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant fixed with necessary full body threaded star headed counter sunk S.S screws etc., including taking down old cupboards complete all as specified and as directed.NOTE:-Fitting shall be measured measured seperately under following items , All joint should be filled with sealant |
| 5 | S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length etc., complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 6 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item) |
| 7 | S&F for contunoius (piano) hinges , mild steel , bright finish or electrogalvanished and width of flaps 30 mm (when open) etc., complete all as specified and as directed. |
| 8 | S&F for 150 mm long Brass handles, cast type, polished bright etc., complete all as specified and as directed. |
| 9 | S&F for 75 mm size hasp and stable , safety type , brass with mild steel hinges pin including bolt to hinge plate with scrows etc., complete all as specified and as directed. |
| 10 | S&F for Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm etc., complete all as specified and as directed. |
| 11 | S&F for extruded aluminium alloy powder coated handles fabricated types, each 100mm long in aluminium doors etc., complete all as specified and as directed. |
| 12 | S&F for Aluminum powder coated barrel tower bolt of extruded section 150mm long in aluminium doors etc., complete all as specified and as directed. |
| 13 | S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified and as directed. |
| 14 | S&F for Aluminum alloy powder coated sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc., complete all as specified and as directed. |
| 15 | S&F stainless steel sliding door bolt of 200 mm size, bright finished, complete with all necessary screws and fixing arrangements complete all as specified and as directed. |
| 16 | S&F stainless steel tower bolt of 200 mm size, bright finished, complete with necessary screws and fixing arrangements complete all as specified and as directed. |
| 17 | S& F stainless steel door handles (pair) of approved make, bright finished, complete with necessary screws and fixing arrangements complete all as specified and as directed. |
| 18 | S&F stainless steel butt hinges made of high-quality stainless steel, suitable for wooden / metal doors, shutters, cabinets, and windows. Hinges shall be corrosion-resistant, durable, and smooth in operation. The hinges shall be complete with necessary stainless steel screws, properly aligned and fixed to ensure easy movement and long service life complete all as specified and as directed. |
| 19 | S&F aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 20 | Supply only Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed to aluminium doors complete all as specified and directed |
| 21 | S&F stainless steel park benches fabricated from AISI-316 grade stainless steel (Austenitic, anti-corrosive) comprising frame, legs, seat and backrest supports made from circular/square/rectangular hollow sections of approved size and design, including SS end caps, base plates, stiffeners, cutting, bending, drilling, seamless welding, grinding, polishing and fixing in position with stainless steel anchor fasteners complete. Foundation/PCC pedestal, excavation and concrete work for fixing the benches shall be measured and paid for separately. Complete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for Plain Cement concrete (PCC 1:4:8 type D2 40 mm graded Aggregate) in foundations, filling and mass concrete. |
| 23 | M&L for use and waste form work to sides of concrete foundations, footings,rafts and raft beams sides and soffits of foundation and plinth beams and similar work, Fair finished surface all as specified and directed. |
| 24 | M&L for heavy duty Non skid tiles (ENDURA TILES ) of size 300x300x9mm thick or high dimension Sqm (except thickness) of any colour any design durastone, weather proof impact ressistant, abrasion resistant exterior tiles, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 25 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard Dense soil complete all as specified and directed |
| 26 | Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and as directed. |
| 27 | Returning, filling in soil incl levelling watering and well ramming in layers n.exc .25cm in fdn trenches complete all as specified and as directed. |
| 28 | Removing excavated soil to a dist n.exc 50m and depositing where directed at a level n.exc.1.50m complete all as specified and as directed. |
| 29 | M&L for broken stone or boulders hard core of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface complete all as specified and as directed. |
| 30 | M&L for PCC type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 31 | M& L for plain cement concrete type A-1 (1:1.5:3) (Using 20 mm graded stone aggregate) as in hard standing finished with even and smooth with using extra cement including use and waste form work complete all as specified and directed. |
| 32 | M&L for cement concrete Type C-1, 1:3:6 (using 20 mm graded stone aggregate) in post foundation, foundation and mass concrete all as specified and directed |
| 33 | M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) complete all as specified and as directed. |
| 34 | M&L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed. |
| 35 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 36 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 37 | M&L for preparation of newly plastered wall surfaces and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed. |
| 38 | M&L for preparation on newly plastered external wall surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over treated surfaces complete all as specified and as directed. |
| 39 | S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed. |
| 40 | Supply only Sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 41 | Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples complete all as specified and as directed. |
| 42 | Supply only Sheet glass 5.5mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 43 | S&F Prelaminated particle board 12mm thick, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 44 | S&F in door stoppers, brass body and tounge with hard drawn steel spring, overall length of cover plate 150 mm complete all as specified. |
| 45 | S&F Aluminum alloy powder coated sliding door bolt 200mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed. |
| 46 | S&F extruded aluminum alloy handle fabricated type anodized 150 mm long complete all as specified and as directed. |
| 47 | S&F in aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 48 | S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections aluminium section main tee 36.5x25x1.4mm, cross 23.5x26.4x1.4mm, angle 25x25x1.4mm including cutting, drilling jointing etc complete including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good complete all as specified and as directed. |
| 49 | M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe-410 (grde E-165) complete all as specified and as directed. |
| 50 | S & F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 51 | S & F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed. |
| 52 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 53 | M&L for deformed TMT steel bars 10mm dia and over cut to length, bent to shape required , including cranking, bending with MS wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 54 | M&L for deformed TMT steel bars 5mm dia and over as in stirrups and cut to length, bent to shape required, including cranking, bending with MS wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 55 | M&L for RCC (Nominal Mix) Type B1 1:2:4 (20 mm graded aggregate) in lintels, beams etc complete all as specified & directed. |
| 56 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge. |
| 57 | S&F for glossy finished cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and as directed. |
| 58 | M & L point wiring One light/fan point controlled by one modular switch 6 Amps one way complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 59 | M & L point wiring one modular 3 pin 6 Amp socket out let on independent board complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 60 | M & L point wiring one modular 3 pin 6 Amps socket outlet on same Board complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 61 | Description same as per item Srl No.58 above but point wiring with 4.0 sqmm PVC FRLSH insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board complete all as specified and directed. |
| 62 | S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 63 | S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 64 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed.Make : Roma (Anchor)/ Legrand/ Havells |
| 65 | S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16 Amp , universal complete all as specified and directed. Roma (Anchor)/ Legrand/ Havells |
| 66 | M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 5A, 240 volts complete all as specified and as directed. |
| 67 | Supply and fix exhaust fan heavy duty, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. Make: CG /Havells /Orient / Usha/ Khaitan |
| 68 | S & F and testing Tube light fittings aluminium tubes 22 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT522 or equivalent to CG/ Philips /Havells |
| 69 | S & F 30 watts LED building security light fittings, IP 65 luminaire, Pressure die cast aluminium housing powder coated graphite grey and toughened glass including necessary fixing arrangements as per site requirements all as specified and directed by Engr In Charge. Make : Luker Cart Part No: LSTE-30 or equivalent to Philips /Havells |
| 70 | S&F GI bracket of 32 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 32 mm dia including nuts, bolts and washers for building secufity light complete all as specified and as directed. |
| 71 | Supply & fixing Wall mounting fan 400 mm sweep, incl all fixing arrangement complete all as specified and directed. Make: CG Model No : 400mm TORPEDO (HS) 2100RPM or equivalent to Havells/ Usha/ Orient |
| 72 | S & F MCB DB, SPN, 8-way, double door, 240 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. |
| 73 | S & F MCB, SPN, \\"C\\" series, 230 volts, 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. |
| 74 | S & F MCB SP 06-32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.Note for item No 72.0 to 73.0 :- Termination of all wiring in to MCBs/ MCCBs/ DBs shall be through copper lugs/ thimbles of adequate size. |
| 75 | M&L for Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.00 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion including taking out old earthing. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 15 mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender