Tender For special Repair To All Drainage And Sewage System Of 19 Inf Dou And special Repair To Bldg No T-92 Jco Living At 519 Asc Bn At Pattan Under Ge 969 Ews
Tender Value
47.23 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
13 days left
EMD
94460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To All Drainage And Sewage System Of 19 Inf Dou And special Repair To Bldg No T-92 Jco Living At 519 Asc Bn At Pattan Under Ge 969 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quions, arches,pillars, chimney works etc, complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete all as specified and as directed. |
| 3 | M & L PCC 1:3:6 type C - 2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate), complete all as specified and as directed. |
| 4 | M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:4, complete all as specified and as directed. |
| 5 | All as per above item No. 4 but except stones, complete all as specified and as directed. |
| 6 | M&L for PCC 1:2:4 type B-1 (Using 20 mm graded crushed stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered angles, complete all as specified and as directed. |
| 7 | M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc, complete all as specified and as directed. |
| 8 | M&L for flush pointing to random rubble masonary, uncoursed or brought upto courses in CM 1:3, complete all as specified and as directed. |
| 9 | Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 20 mm on granite or trap stone, complete all as specified and as directed. |
| 10 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc, complete all as specified and as directed. |
| 11 | Excavation in trenches in soft/loose n exc 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surfaces to required levels/slope for drain/channel/foundation, complete all as specified and as directed. |
| 12 | M&L for 300mm bore Reinforced concrete hume pipes, class NP2, laid and jointed complete with collars including Concrete bed to drain pipes including packing under, & completely surrounding pipes with concrete after they are laid and tested; in cement concrete 1:4:8, complete all as specified and as directed. |
| 13 | Returning filling in, approved soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and as directed. |
| 14 | Removing excavated material exc. 250m but n exc. 500 m and depositing where directed, complete all as specified and as directed. |
| 15 | Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete alll as specified and as directed.Note- Wk will be requisitioned based on wk order and paid as per site and user requirement) |
| 16 | Removing excavated materials n exc 50 M and depositing where directed at a level n exc 1.5 M above the starting point, complete alll as specified and as directed. |
| 17 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete alll as specified and as directed. |
| 18 | M & L Brick work with sub class 'B' burnt bricks (old size bricks) straight on curved on plan exc 6 M mean radius built in CM 1:4, complete alll as specified and as directed. |
| 19 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth complete. Complete all as specifed and directed by engr-in-charge. |
| 20 | Demolition and breaking up 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches incl all fittings & accessories, complete alll as specified and as directed. |
| 21 | M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete alll as specified and as directed. |
| 22 | M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, complete alll as specified and as directed. |
| 23 | M&L for 100 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete alll as specified and as directed. |
| 24 | S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc, complete alll as specified and as directed. |
| 25 | M&L PCC 1:3:6 type C-2 concrete bed using 40mm graded stone agg to drain pipe including packing under & haunching against the sides of pipe 110 mm bore after these are laid in trenches, complete alll as specified and as directed. |
| 26 | Cutting in to existing manhaoles for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm, complete alll as specified and as directed. |
| 27 | Construction of Soakage well 2.40m internal dia and 6.00 m depth including excavation in hard/dense soil PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in footing stone honey comb / solid masonary in cement mortar 1:4 RCC (M-30 design mix) cover slab filled with brick bats including intercepting chamber screen chamber and disposal of soil complete all as specified and shown on drawings. |
| 28 | M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring, complete all as specified and as directed. |
| 29 | M& L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 30 | M& L for 100 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base, complete all as specified and as directed. |
| 31 | M&LVetrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed in CM 1:4, complete all as specified and as directed. |
| 32 | M & L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 33 | S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling, complete all as specified and as directed. |
| 34 | S&F in repair Harrison rails 20mm aluminium alloy,chromium plated with fixing brackets,stops,roller etc ,complete all as specified and as directed. |
| 35 | Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed. |
| 36 | M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section, complete all as specified and as directed. |
| 37 | S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square not exceed 0.5 sqm in each pane including, complete all as specified and as directed. |
| 38 | Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets, complete all as specified and as directed. |
| 39 | M&L of softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated on wall of 10-15mm , complete all as specified and as directed. |
| 40 | M&L of softwood 2nd class boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebated on ceiling 10-15mm, complete all as specified and as directed. |
| 41 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section, complete all as specified and as directed. |
| 42 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or simialr pattern roof covering , complete all as specified and as directed. |
| 43 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 44 | Plain galvanised mild steel sheeting 0.80 mm thick, with 275micron thick galvanising as in ridges, valley gutters etc (length and girth as fixed), complete all as specified and as directed. |
| 45 | Applying two coats of synthetic enamel painting to new steel surfaces based exc. 10 cm width/girth over one coat of Red oxide primer including new or previously untreated surfaces including filling with filler where reqd, complete all as specified and as directed. |
| 46 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and as directed. |
| 47 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and as directed. |
| 48 | S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 49 | S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 50 | S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b) , complete all as specified and as directed. |
| 51 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 52 | S&F for Factory Made Solid PVC Moulded with particle board core Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 53 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 54 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed. |
| 55 | S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 56 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 57 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 58 | S&F Aluminium handles 100 mm , cast type,anodised , complete all as specified and as directed. |
| 59 | S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 60 | M&L two coats of synthetic enamel paint over and incl a coat of pink primer including preparation of surface on new wooden sruface over 10 cm width or girth, complete all as specified and as directed. |
| 61 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of f the permishes, complete all as specified and as directed. |
| 62 | M & L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed. |
| 63 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 64 | S&F Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick, complete all as specified and as directed. |
| 65 | M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 66 | M&L Preparation of old wooden surface of any description and applying over a coat of primer, two coat of synthetic enamel paint, not otherwise described,over 10cm width or girth , complete all as specified and as directed. |
| 67 | M&L Creosote preparing surfaces of wood and wood based materials, and wood based materials, new or old, of any description and girth, not otherwise described and treated with, complete all as specified and as directed. |
| 68 | M&L for rubber moulded coloured durapaved heavy duty tile 10-12 mm thick ( std size ) set, jointed and pointed in neat cement slurry in floors with grey cement with pigment over and incl 15 mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 69 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and as directed. |
| 70 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, complete all as specified and as directed. |
| 71 | M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint, complete all as specified and as directed. |
| 72 | M&L for 6 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work fixed with nails to timber frame work on wall and wall etc, complete all as specified and as directed. |
| 73 | M&L for 6 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work fixed with nails to timber frame work on ceiling and wall etc, complete all as specified and as directed. |
| 74 | M&L for Hardcore of broken stone of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and as directed. |
| 75 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long, complete all as specified and as directed. |
| 76 | S&F corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed. |
| 77 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and as directed. |
| 78 | S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed. |
| 79 | S&F in repair vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cover incl provision of concrete/ white cementing and P or S trap in repairs, complete all as specified and as directed. |
| 80 | S&F in repair PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs, complete all as specified and as directed. |
| 81 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 82 | S&F in repair Brass CP centre hole basin mixer , complete all as specified and as directed. |
| 83 | S&F for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule in repair , complete all as specified and as directed. |
| 84 | S&F in repair PVC (SWR) junction single T equal or unequal 110 mm dia , complete all as specified and as directed. |
| 85 | S&F in repair PVC (SWR) bends 110 mm dia fixed, complete all as specified and as directed. |
| 86 | S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor , complete all as specified and as directed. |
| 87 | S&F in repair PVC (SWR) bends 75 mm dia fixed, complete all as specified and as directed. |
| 88 | S&F in repair PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed. |
| 89 | Taking down and replacement with 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors , complete all as specified and directed. |
| 90 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed. |
| 91 | S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated , complete all as specified and as directed. |
| 92 | S & F Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed. |
| 93 | S&F CP health faucet hand held triggered nozzle and delivers a spray of water with pipe , complete all as specified and as directed. |
| 94 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling of wrough iron of any descrption, complete all as specified and as directed. |
| 95 | M&L for Applying two coats of synthetic enamel painting to new steel surfaces based exc. 10 cm width/girth over one coat of Red oxide primer including new or previously untreated surfaces including filling with filler where required, complete all as specified and as directed. |
| 96 | S&F in repair 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed. |
| 97 | S&F in repair 25mm PPR Gate valve inserted as per requirement of site, complete all as specified and as directed. |
| 98 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms), complete all as specified and as directed. |
| 99 | Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc. |
| 100 | M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- |
| 101 | (a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way. |
| 102 | (b) One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board. |
| 103 | (c) One 3 pin 3 Amp switch socket outlet on same board with accessories. |
| 104 | M&L Point wiring complete with FRLS 1100 Volts grade, 2.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 20 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 2.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed |
| 105 | S&F in repair Modular switch single pole, one way 6 amps 1 module 240 volts, complete all as specified and as directed. |
| 106 | S&F in repair Modular switch single pole, one way 16 A 240 volts, complete all as specified and as directed |
| 107 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps,modular type complete with gang box all as specified and as directed |
| 108 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, modular type complete with gang box all as specified and as directed. |
| 109 | Supply and fix modular fan step regulator,120 Watt - 2 module, complete all as specified and as directed. |
| 110 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed. |
| 111 | S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 112 | M&L for sheet metal enclosure for DBs when MCB to be used single phase 240 volts, double door 08 way with 200 Amps rated bus bar, complete all as specified and as directed. |
| 113 | S & F MCB SP 6 to 32 Amps, 240 Volts, B Curve, complete all as specified and as directed. |
| 114 | S & F MCB, DP 40 Amps 240 Volts B Curve, complete all as specified and as directed. |
| 115 | Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding, complete all as specified and as directed.Note : Spares used and rewinding shall be measured and paid seperatly under relevant item. |
| 116 | Supply and fixing Inverter LED bulb 15 W, 220V suitable size, complete all as specified and as directed. |
| 117 | S & F LED light fitting 1X9W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 118 | Supply and fixing round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 119 | Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 Core, complete all as specified and as directed. |
| 120 | M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 15 mm dia light grade for protection of earth Wire 20 mm dia GI pipe medium grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc |
| 121 | Note:- Schedule of credit Rs 1,66,862.40 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender