Tender For Repair To Flooring, Tiling, Plastering , Joinery, Sunken Treatment, Plumbing, Sanitary Fittings, Internal Painting Etc To Single Living Billets, Messes Smc And Other Otm Bldgs In Domestic Area At Air Force Station Utarlai
Tender Value
30 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
11 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Tiling, Plastering , Joinery, Sunken Treatment, Plumbing, Sanitary Fittings, Internal Painting Etc To Single Living Billets, Messes Smc And Other Otm Bldgs In Domestic Area At Air Force Station Utarlai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Jul-2026 | AMD1 | Date | 03-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for rendering 10mm thick in CM (1:4) as in backing coat, finishing even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for coloured glazed ceramic tiles (300X200mm)X7mm in vertical surface set and jointed in neat cement slurry and pointed with white/coloured cement to match the surface comp Complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for coloured glazed ceramic tiles 350x250x7mm/450x350x7mm 7-8mm thick in vertical surface set and jointed in neat cement slurry and pointed with white/coloured cement to match the surface Complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition of un-reinforced cement concrete in ground floors or pavings n. exc. 15 cm thick (below or above ground level) Complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for 75mm thick PCC 1:4:8 type D-2(using 40mm graded aggr) as in sub base.complete all as specified and directed. |
| 7 | M&L for 25mm thick PCC 1:2:4 type B-1(using 20mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed. |
| 8 | M&L for 40 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate finished even and smooth with using extra cement complete all as specified and as directed by Engr-in-charge. |
| 9 | M&L glass dividing strips, 3mm thick , width of strip 38mm and inserted in position to conform to design, Complete all as specified and directed by Engineer-in-Charge. |
| 10 | Non skid ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade are of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm. In floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match. Complete all as specified and directed by Engineer-in-Charge. |
| 11 | Non skid ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade are of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm. In floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match. Complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for vitrified ceramic tiles 10mm thick ( square/rectangular) polished in any shade, area of each tiles not exceeding 0.36 sqm, in floors, skirting and similar work etc, screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed cement to match. Complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for machine cut kota stone slab flooring , 20-25 mm thick over screed bed or bedding layer 20mm thick in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing Complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for granite (of any type) work of any shade 18 to 20mm thick (table rubbed and polished) in any shade as in cooking platforms, wall clading and similar work over screed bed or bedding layer 20mm thick in CM(1:6), jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete. Complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation. Complete all as specified and directed. |
| 16 | M&L for cutting hole of any dia for cooking plateform for gas pipe line and similar work incl making good to existing surface. Complete all as specified and directed. |
| 17 | M&L for cutting and polishing existing kota stone flooring incl making good to existing flooring all as specified and directed. |
| 18 | M&L for filling white cement as in joint filling and similar work incl racking out joint, cleaning of surfarce before filling white cement work. Complete all as specified and directed. |
| 19 | M & L for machine pressed precast interlocking tile any size & shape of 60 mm thickness M-35 grade conforming to IS 15658-2006 with grey cement & pigment and vibrated with mechnical vibrator, with 30 mm thick crushed sand for cushioning incl dismantling of old tiles any type and any size. Complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for 75mm thick cement concrete (1:3:6) type C2 using 20mm graded stone aggregate as in paving/plinth protection in bitumen filler/mastic filling Complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for Precast cement concrete louvres and jallies 30mm thick including precast cement concrete baluster/post and similar items set in cement mortar 1:6 type B0 (1:2:4 using 12.5mm graded aggregate etc sample as approved by GE incl demolition of old jali any type. complete all as specified and directed by Engr-In-Charge. |
| 22 | Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifially provided. Complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for PCC 1:5:10 type E-2(using 40mm graded aggr) as in filling in sunken floor / sub base of flooring and similar work. Complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 ltr/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bonding and applying a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt on surface (bottom and vertical) as in sunken floor and similar work. Complete all as specified and directed by Engineer-in-Charge. (Note : Supply of water proofing compound will be measured and paid separately .) |
| 25 | S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 26 | Supply only integral water proofing compound. |
| 27 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness and type or simlar patttern roof ceiling. Complete all as secified and directed by Engr-In-chage. |
| 28 | S&F for GI frame work for seamless ceiling size of grid 600 x 600 mm comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using screws at 450 mm c/c channel 0.9 mm thck having two equal flanges of 15mm each and web of 45 mm seuspenced from soffit at approx 900 mm C/C with GI cleat/wire or similar item and steel expansion fasteners with and incl ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with cennecting clips across the intermediate channel at 457 mm C/ C. Complete all as specified and directed by Engineer-in-Charge. |
| 29 | M&L for 12mm thick Gypsum board in ceiling fixed with screw as per manufacturer's instructions including preparation of surfaces new or old decorated, necessary fixing of anchor and bolts where required Complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F for powder coated aluminium snap grid frame work for false ceiling work for seamless ceiling size of grid 600 x 600 mm and seuspenced from soffit/ceiling at approx 900 mm C/C with GI cleat/wire or similar item and steel expansion fasteners . Complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F for 8-10 mm thick decorative false ceiling boards, fixed on existing GI grid and similar work as per manufacturer instruction. Complete all as specified and directed. |
| 32 | Prepration on new ceiling surface and applying two coat of distemper oil emulsion over one coat of alkali resistent primer . complete all as specified & directed by Engineer-in-Charge |
| 33 | Demolition of pcc block/brick work or stone masonry, built in cement mortar, complete all as specified and directed. |
| 34 | M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete. |
| 35 | Taking down cement plaster of any description on bricks, concrete or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 36 | M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work . Complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for rendering 5mm thick in CM (1:4) on concrete surface such as roof projection, chajja, fin and similar work up to 12 mtr height of the bldg, finishing even and smooth without using extra Complete all as specified and directed by Engineer-in-Charge. |
| 38 | Prepration on new plastered or unplastered wall surface and applying two coat of oil bound distemper over one coat of alkali resisteant primer, incl and over two coat of wall care putty. complete all as specified & directed by Engineer-in-Charge |
| 39 | Prepration on new plastered or unplastered ceiling surface and applying two coat of white wash over one coat of white cement primer up to 12 mtr height of the bldg. complete all as specified & directed by Engineer-in-Charge |
| 40 | Taking down frames with shutters (without taking off shutters from the frame ) area exc 1.5 Sqm but n.exc 4 sqm mtr Each incl iron mangery complete. |
| 41 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each .Complete all as spcified. |
| 42 | S&F 105 x 60mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer Complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F 35mm thick panelled shutters, (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board mediu density, wood particle board with commercial face veneers fitted to fhowkats.. complete all as specified & directed by Engineer-in-Charge. |
| 44 | S&F 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2st class haed wood). complete all as specified & directed by Engineer-in-Charge |
| 45 | S&F galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 46 | S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed. |
| 47 | S& F 200 mm long, aluminum anodised barrel tower bolts of extruded section complete as specified. |
| 48 | S&F 150mm long aluminum alloy handles, anodized complete as specified. |
| 49 | S&F 250mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 50 | M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer, Complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F in repair Venetian blinds/ Venetian roller, 1st quility/Decorative type wondow curtain with rolling system as approved Complete all as specified and directed by Engineer-in-Charge. . |
| 52 | S & F in repair stainless steel curtain rails/rod 25mm bore decorative type fixing with decorative type stainless steel brackets and stainless steel end blub, etc (Sample as approved by Engr-in-charge).Complete all as specified and directed by Engineer-in-Charge. |
| 53 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete. |
| 54 | S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed |
| 55 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. Complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised . |
| 57 | S&F steel window (box type shutter) factory made with side hung shutters, one side for glazing shutter and other side wire gauge shutters including pressed steel frames (pressed steel frames mild sheet 1.2 mm thick) for window including box type hinges, steel handles, steel peg stay and all locking arrangement complete with gauge and glazing bars dovetailed or welded, incl one shop coat of primer, Complete all as specified and directed by Engineer-in-Charge. Note : i) The window shall be fabricated as per sample approved by Engr-In-Charge. ii) Glazing pan, wire gauge shall be measured and paid separately. |
| 58 | S&F for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 Complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F steel Ventilators with top hung/side hung shutter including hinges steel peg stay, incl one shop coat of primer, complete all specified.complete all as specified and directed . |
| 60 | M & L for preparation of new steel surfaces and applying two coats of synthetic enamel. |
| 61 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm. |
| 62 | M&L sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane up to G+2 height bldg. |
| 63 | M&L for sheet glass 3mm thick figured glass type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in Each pane up to G+2 height bldg. |
| 64 | Hacking out old broken glass from metal frame, including cleaning and removing old putty clip etc and S&F of sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane up to G+2 height bldg. |
| 65 | M&L in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm fixed to window/ventilator with necessary nut/bolt/screw including removing of existing wire mesh. Complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing/sliding etc. Complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F Anodised aluminium rolling/sidehung door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glass, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges/rollers, anodised aluminum snap beading screws etc . Complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glass, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and directed by Engineer-in-Charge. |
| 69 | M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, Complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repair 12 mm thick plywood grade BWR, type BB, , ISI marked as in cupboard shutter / shelves, including 6mm thick teak wood liping at edges or as directed, including fixing in MS/timber frame of suiatable size fixed with screws to timber frame work. Complete as specified and directed by Engr-in-charge. |
| 71 | M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer, Complete all as specified and directed by Engineer-in-Charge. |
| 72 | Dismantling of plain or corrugated steel sheeting any gauge, thickness incl nainital or simlar patttern roof coverings. Complete all as secified and directed by Engr-In-chage. |
| 73 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding top wall, fixed with self tapping screws, Complete all as specified and directed by Engineer-in-Charge. |
| 74 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for . Complete all as secified and directed by Engr-In-chage. |
| 75 | S&F for framed brackets of angles or tees with web and flanges cut to shape for shed work, cooler stand and simiar work, drilled and countersunk for screw, including beding and welding angles as neceesry gusset plates riveting etc oncforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge. |
| 76 | M&L for preparation new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 77 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with \\"P\\" or \\"S\\" Trap front or back inlet fixing bols, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete as directed. |
| 78 | S&F in repair vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc comple incl making good to floor. |
| 79 | S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia wast coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement including CI brackets all directed. |
| 80 | S&F in repair floor trap/nahani trap of cast iron with CP grating incl jointing to waste pipe in cement mortar, dia meter of outlet is 100 mm, complete all as specified and directed. |
| 81 | S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and handle including brackets. |
| 82 | S&F in repair CP brass swival type shower rose 150mm size with one stainless steel wall flange and shower arm, including fixing to GI pipe or union, complete all as specified and directed. |
| 83 | S&F in repairs chromium plated tubular towel rail 20 mm dia, D type 60 CM long complete all as specified and directed. |
| 84 | S&F in repair CP fancy type bib taps 15mm long body bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 85 | S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed. |
| 86 | S&F in repair CP pillar taps fancy type (long neck/swan neck type) , of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 87 | S&F in repair 15mm bore CP angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 88 | S&F in repair PVC connections, 600 mm long with two PTMT nuts and washers, suitable for connecting 15 mm bore pipes, complete all as specified and directed. |
| 89 | S&F in repair for galvanised iron steel water tubing 15mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel water tubing alongwith connection fixed/laid in any situation.Complete as specified and directed by Engr-in-charge. |
| 90 | S&F in repair for galvanised iron steel water tubing 20mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors incl taking up or down existing steel water tubing alongwith connection fixed/laid in any situation.Complete as specified and directed by Engr-in-charge. |
| 91 | S&F in repair for 500 litres capacity rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe including taking down old water tank. Complete as specified and directed by Engr-in-charge. |
| 92 | S&F in repair for 1000 litres capacity rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified in SSR Part I. Complete as specified and directed by Engr-in-charge. |
| 93 | M&L preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted . Complete all as specified and directed by Engineer-in-Charge. |
| 94 | Complete removal of existing treatment of old wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying two coat of distemper oil emulsion any tinted . Complete all as specified and directed by Engineer-in-Charge. |
| 95 | M&L for applying 1.5mm thick (Avarage thickness) wall care putty . Complete all as specified and directed by Engineer-in-Charge. |
| 96 | M&L for complete removal of existing treatment of internal wall surface by using mechanical means and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, over 1.5mm thick wall care putty . Complete all as specified and directed by Engineer-in-Charge. |
| 97 | M&L for preparation on old plaster surface of walls & applying one coat of cement base paint up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge. |
| 98 | M&L for preparation on old plaster surface of ceiling & applying one coat of white wash up to 9 mtr height of bldg. Complete as specified and directed by Engr-in-charge. |
| 99 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge. |
| 101 | S&F of high-quality door bottom seal 0.9 RM long made of aluminium/PVC body with flexible rubber/brush/silicone sealing strip at bottom of the door shutter to prevent dust, insect and similar items. The seal shall be suitable for wooden/metel doors and fixed with screws or as per manufacturer's instruction. Complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender