Tender For special Repair Of Bldg No Np-49 (Chdh) In repair of 17 Madras And Provn Of 04 X Soakage Well (01 X22 Kumaon, 01 X Ta Bn, 01 X Mes And 01 X Bde C ) Under Ge Kargil
Tender Value
15.88 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
10 days left
EMD
32000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No Np-49 (Chdh) In repair of 17 Madras And Provn Of 04 X Soakage Well (01 X22 Kumaon, 01 X Ta Bn, 01 X Mes And 01 X Bde C ) Under Ge Kargil
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing old steel surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Chagre |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Chagre |
| 3 | M&L for colored joint free Non - skid Ceramic tiles 9 to 10mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed by Engineer-in-Chagre |
| 4 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick ( square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specfied and directed by Engineer-in-Chagre |
| 5 | M&L for coloured glazed ceremic tiles in vertical surfaces 450X 300X 7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15mm thick rendering in CM (1:4) complete all as specfied and directed by Engineer-in-Chagre |
| 6 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as subbase to flooring or similar works complete all as specified and directed by Engineer-in-Chagre |
| 7 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in plinth protection and subbase to floors complete all as specified and directed by Engineer-in-Chagre. |
| 8 | Demolition of concrete of any (unreinforced) description and in any position and removal of rocks/debris to a distance not exc 50 mtrs and depositing where directed at a level n exc 1.5m above the starting point. |
| 9 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Chagre |
| 10 | M&L rendering 15mm thick cement plaster in cement mortor (1:4) finished even & fair without using extra cement on brick/concrete surfaces complete all as specified and directed by Engineer-in-Chagre |
| 11 | M&L for two coats of cement based paint and 3mm thick wall care putty on newly plastered surfaces of walls over a coat of primer including preparation of surfaces complete all as specified and directed by Engineer-in-Chagre |
| 12 | M&L for two coats of cement based paint and 3mm thick wall care putty on old plastered surfaces of walls over a coat of primer after complete removal of existing treatment complete all as specified and directed by Engineer-in-Chagre |
| 13 | M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper over a coat of 3mm thick wall care putty, complete all as specified and directed by Engineer-in-Chagre |
| 14 | Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Chagre |
| 15 | S&F 3mm thick figured glass ordinary quality and glazing fixed with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 16 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed. |
| 17 | S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and directed. |
| 18 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed by Engineer-in-Chagre |
| 19 | Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed by Engineer-in-Chagre |
| 21 | S&F second class softwood fillets square, rectangular or triangular in section sectional area not exceeding 3 sqcm, clean sawn, secured with nails or brads bullnosed, splayed, chamfered or rounded on one edge or face as in cover fillets, all as specified and directed by Engineer-in-Chagre |
| 22 | S&F second class softwood moulding as in cornices, picture rails and the like sectional area not exceeding 6 Sqcm fixed with nails complete all as specified and directed by Engineer-in-Chagre |
| 23 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging deviceto be approved by Engr in Charge, complete all as specified and directed by Engineer-in-Chagre |
| 24 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified and directed by Engineer-in-Chagre |
| 25 | S&F in repair curtain rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed by Engineer-in-Chagre |
| 26 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed by Engineer-in-Chagre |
| 27 | S&F 35mm thick second class softwood (KAIL) Plain, framed, panelled shutters (any panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified and directed by Engineer-in-Chagre |
| 29 | S&F second class softwood (KAIL) 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified and directed by Engineer-in-Chagre |
| 30 | S&F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed by Engineer-in-Chagre |
| 31 | S&F anodised aluminium barrel tower bolt extruded sections 150 mm size complete all as specified and directed by Engineer-in-Chagre. |
| 32 | S&F 100mm long, Aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-Chagre |
| 33 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Chagre |
| 34 | M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface complete all as specified and directed by Engineer-in-Chagre |
| 35 | M&L for Soakage well exc in hard dense soil, foundation in PCC 1:3:6 well of honey combed masonry with top ring of M25 concrete, including, intercepting chamber, screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, filling with stone boulder complete of 3.00m dia amd 3.00 m deep ( Drg No - CESZ/TD/ -1078/2011, Sheet - 1/1). |
| 36 | M&L for Soakage well exc in hard dense soil, foundation in PCC 1:3:6 well of honey combed masonry with top ring of M25 concrete, including, intercepting chamber, screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, filling with stone boulder complete of 2.4m dia amd 3.00 m deep ( Drg No - CESZ/TD/ -1078/2011, Sheet - 1/1). |
| 37 | M&L for 150mm bore (DOUBLE WALL CORRUGATED) Pipes (150mm SN8),including fitting laid on pcc bed and jointed (incl jointed with existing chamber or pipe) complete with collors all as directed and specified and directed by Engr-in-Charge. |
| 38 | M&L for Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. |
| 39 | M&L for Point wiring for light/fan with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point controlled by one switch. |
| 40 | All as per Srl item No. 39 here in before but for one 3 pin 5 Amps socket outlet on same board. |
| 41 | All as per Srl item No 39 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board. |
| 42 | All as per Srl item No 39 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 43 | S&F Switch piano flush type 5 Amps, single pole one way. |
| 44 | S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type. |
| 45 | S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type. |
| 46 | S&F Socket Outlet 2 in 1, 5 Amp flush type |
| 47 | M&L of ceiling rose on PVC square blocks surface bakelite 3 terminal complete all as specified and directed. |
| 48 | S&F LED lights fitting, surface mounting general purpose ultra slim economical LED batten of 1x 18W, lumen out put 100lm/wattt, CCT:6500K/3000K , PF>0.9, in extruded PC housing and round/square shaped diffuser including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 16 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing Complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 6 to 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete including connecting to to celling rose with suitable size cable all as specified and directed by Engr-in-Charge. |
| 53 | S&F exhaust fan made of sturdy Engineering Steel body complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of 380 mm sweep heavy duty including making arrangement for fixing Complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm including making arrangement for fixing Complete all as specified and directed by Engr-in-Charge. |
| 55 | M&L for submain wiring comprising single core ,2 Runs of 10.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 2mm thick PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including 1X6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS including taking down old UNSV submain wiring and making good the disturbed surface complete all as specified and directed by Engr-In-charge.( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 56 | M&L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6.0mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and connected to main switch board or equipment, including watering arrangement with GI medium grade 20mm bore watering pipe with funnel and wire mesh with PCC chamber CI cover with frame including 15mm dia GI pipe light grade for protection of earthing lead etc including necessary excavation in any type of strata, returning, filling, removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I, connected to earthing test point all as specified or indicated including testing on completion.Notes : (i) Earth continuity conductor including protection pipe upto 7.5 meters from earth electrode will be include in unit rate,(ii) Arrangement for earth resistance test should be carried out by the contractor. No extra payment shall be provided for the same. |
| 57 | S&F in replacement1100 volts grade heavy duty 16 Sqmm 2 core flat cable PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by Engr-in-Charge. |
| 58 | Note : Deduction for amount of Rs. 18,445.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender