Tender For Certain B/R Sanctioned At Ancom ,P-101,Jal Vihar,Mi Room Coast Guard ,P-35 Coast Guard Under Ge Haddo , Sri Vijaya Puram
Tender Value
42.50 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
11 days left
EMD
85000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Sanctioned At Ancom ,P-101,Jal Vihar,Mi Room Coast Guard ,P-35 Coast Guard Under Ge Haddo , Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers not exceeding 25 cm in hard/dense all as specified and as directed. |
| 3 | M&L for removing excavated material (any type of soil) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed. |
| 4 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders specified and as directed. |
| 5 | M & L for providing 100 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors specified and as directed. |
| 6 | M&L chequered Cement concrete tiles 30cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed including dismantling old tile all as specified and as directed. |
| 7 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling old paver blocks complete all as specified and as directed. |
| 8 | M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W(Gde-E-250) quality-A complete all as specified and as directed. |
| 9 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins, pole where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using structural steel of Fe-410W (Gde E-250 quality A) all as specified and as directed. |
| 10 | S & F Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed. |
| 11 | S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. |
| 12 | Demolition of precast cement concrete block walling built in cement or lime mortar complete all as specified and as directed. |
| 13 | M& L for precast cement concrete block masonry with solid blocks using PCC 1:3:6, type C1(using 20mm graded stoneaggregate), exc. 10cm in width, set in CM 1:6 all as specified |
| 14 | M &L PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in filling, foundation and mass concrete all as specified and as directed. |
| 15 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:4 all as specified and as directed. |
| 16 | Dismantling structural steel work of any description and in any position etc complete all as specified and as directed. |
| 17 | S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 18 | Material & Labour for preparing newly plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and as directed. |
| 19 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheet as specified and as directed. |
| 20 | M & L for preparing of new of previously untreated steel surface of any description, not otherwise described, over 10 cm width or girth applyig two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 21 | Providing and fixing fluted decorative wall panelling of approved design and pattern made out of high-density moisture resistant WPC/PVC/MDF fluted panels of size and profile as approved having minimum thickness 8 to12 mm with vertical linear grooves/flutes at regular intervals, finished in approved shade, texture and laminate/PU/polish finish complete. Panels shall be fixed over framework/base surface with approved quality polymer based adhesive and additionally secured with stainless steel screws/clips wherever required. Joints shall be finished neatly to true line and level including edge trims, corner mouldings, cutting for electrical boxes/switches, necessary backing arrangement, scaffolding and all incidental works complete all as specified and as directed.The work shall include preparation of wall surface, cleaning, rubbing, alignment, proper spacing, sealing of joints, touch-up finishing and making good disturbed portions to match adjoining surfaces complete in all respects as specified and directed. |
| 22 | M&L for powder coated aluminium frame for doors, windows, ventilators, partition, wind tie with one or more rebates including joining cleat for fixing etc complete as specified and as directed. |
| 23 | Supply and fix only sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane all as specified and as directed. |
| 24 | Supply and fix only 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 25 | M&L for cement concrete type B1, 1:2:4 (20mm aggregate) in foundations, filling and mass concrete specified and as directed. |
| 26 | M &L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 27 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws in semi circular/ curved shape all as specified and directed. |
| 28 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 29 | M&L plain anodised aluminium flat section not less than 0.68 Kg per RM as self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specifed |
| 30 | Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each etc, completed all as specified and as directed. |
| 31 | Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each etc, completed all as specified and as directed. |
| 32 | M&L for aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 5mm sheet plain glass for panels and aluminium wire mesh including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and directed.Note: Each window shall be provided with 2 Nos. of glazed shutters + 1 No. of wire mesh shutter of required size. |
| 33 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, rollers etc all complete as per architectural drawings and the directions and as directed. |
| 34 | M&L aluminium anodised doors standard jindal or equivalent section size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section size 46.72x44.45x1.4mm for top and central rail section size95x44.45x2mm for bottom rail,section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet plain glass in top pannel and 4mm thick aluminium composit pannel board including fitting with hydralic door closer,handle,mortise lock heavy duty etc complete all as specified and directed. |
| 35 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane. |
| 36 | M & L for 12mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work or doors etc all as specified. |
| 37 | Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying two coats of Oil Bound Distember over a coat of primer and a layer of 1 mm thick wall care putty including preparation of old decorated surfaces of wall complete all as specified and as directed. |
| 38 | Material and labour for Preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying one coat of oil emulsion distemper (white/Tinted) complete all as specified and as directed. |
| 39 | M& L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes , etc complete all as specified and as directed. |
| 40 | S&F Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling , etc complete all as specified and as directed. |
| 41 | S&F glazed ceramic tiles (350x450 x 7mm thick ) on dado & skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile including dismantling floor hearth or wall tiling etc, complete all as specified and directed. |
| 42 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 43 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per specified and as directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 44 | Supply only 100 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified and directed. |
| 45 | Supply and fix 200 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 46 | Supply and fix 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed. |
| 47 | S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and directed. |
| 48 | M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, etc complete all as specified and as directed.Note: Water proofing compound shall be measured and paid separately. |
| 49 | Supply only integral water proofing compound all as specified and as directed. |
| 50 | M&L for new plastered on walls and applying two coats of oil bound distemper over a preparatory coat of average 1mm thick wall care putty over a coat of priming plastered and other surfaces with alkali resistant priming paint, including necessary preparation of surfaces etc, completed all as specified and directed. |
| 51 | Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying two coats of Oil Bound Distember over a coat of primer and a layer of 1 mm thick wall care putty including preparation of old decorated surfaces of wall complete all as specified and as directed. |
| 52 | Material and labour for Preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying one coat of oil emulsion distemper (white/Tinted) complete all as specified and as directed. |
| 53 | S&F 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 54 | S&F 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc s complete all as specified and directed. |
| 55 | S&F UPVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and directed. |
| 56 | S&F UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 57 | Cutting chases in stone, concrete block or slab walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth |
| 58 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 59 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 60 | S & F Vitreous China wash down water closet pan (pedestal pattern), including P/Q/S trapc(excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed |
| 61 | S&F plastic water closet seat for EWC, closed pattern with flat bottom and cover, any colour as approved by GE and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 62 | Supply and fix Vitreous China wash basin, white, flat back, size 630 mm x 450 mm including CI brackets, (flat back or angle back type) any size, including cutting for and pinning in ends of pedastel stand but exclusive of fixing of supply and waste pipe stand, waste coupling, 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors, including 15 mm bore long neck fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including 15 mm bore fancy type stop valves, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and 600mm PVC connection pipe etc, completed all as specified and directed. |
| 63 | Supply and fix 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets complete all as specified and as directed. Make : Jaquar / Parryware (Slim line ) / M/s Hindustan Sanitary Ware /Hindware |
| 64 | S & F health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified. |
| 65 | S&F two way bib cock, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed |
| 66 | S&F of 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thk AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 67 | S & F of CP Towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. |
| 68 | S & F for PVC connections 15mm size with PTMT nuts of length 450mm, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender