Tender For Welcome Maintenance And Misc Repair Work At Hqsc,Cesc,Queens Garden,6Qg,16Qg, Veteran / Awawa Complex And Other Various Nearby Locations In The Area Of Age B/R (Central) Under Ge (N) Pune.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
12 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Misc Repair Work At Hqsc,Cesc,Queens Garden,6Qg,16Qg, Veteran / Awawa Complex And Other Various Nearby Locations In The Area Of Age B/R (Central) Under Ge (N) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as directed |
| 2 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 3 | M&L for Glazed coloured ceramic tiles in vertical surface 300mmx600mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including backing coat of 10 mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 4 | M&L coloured vitrified double charged tiles 8-10mm thick (square/ rectangular) area of each tile n.exc 0.36 sqm as in floor laid in any pattern etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 of any description complete all as specified. Note:- Design/pattern of tiles as approved by Engr-in-charge |
| 5 | -Ditto- all as per item No. 04 item above but skitings/dado on vertical surfaces including 10mm thick backing coat f cement plaster in CM 1:4 complete all as directed. |
| 6 | M&L for 7 to 8 mm thick textured tiles exc 0.06 sqm but not exc. 0.18 sqm in size of each tile as exterior wall cladding for decorative purposes set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of stone and including 10mm thick backing coat in CM 1:4 complete all as directed.Note:- Design/pattern of tiles as approved by Engr-in-charge |
| 7 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed |
| 8 | M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. |
| 9 | Labour only for paver blocks laid over sand cushioning including dismantling of existing paver blocks of any size and shape. |
| 10 | M&L for crushed sand for cushioning under paver blocks all as specified and directed. |
| 11 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including of existing as directed |
| 12 | M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.06 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 13 | M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platfoRM below granite stone and like including necessary jointing and pointing in cement mortar and making good to disturbed surface including dismantling of existing stone slab complete all as specified and directed |
| 14 | M&L granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed. |
| 15 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed. |
| 16 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing concrete and rubbish off the premises complete all as specified |
| 17 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0 m height of Bldg complete all as directed. |
| 18 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg with using @ 2% WPC on cement complete all as specified. : |
| 19 | M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement upto 12.0mtr height of bldg complete all as specified. |
| 20 | M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and directed. |
| 21 | M&L for pre-cast cement concrete block masonry with solid blocks exc10 cm in width, type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as directed |
| 22 | M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. |
| 23 | M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper of any tint over a coat of primer over a thin layer (1 mm to 1.5 mm) of wall care putty upto 12.0mtr height of Bldg complete all as specified. |
| 24 | M&L for preparation of old surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. |
| 25 | M&L for preparation of old decorated surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall incl removing existing loose layer of paint complete all as specified and as directed by Engineer-in-charge. |
| 26 | M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing with emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces to receive new finish complete all as specified and directed. |
| 27 | M&L for complete removal of existing treatment on ceilings using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed. |
| 28 | M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces. |
| 29 | M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces. |
| 30 | M&L for applying one coat of alkali resistant priming paint on wall. |
| 31 | M&L for applying one coat of alkali resistant priming paint on celing. |
| 32 | M&L for two coats of Oil bound distemper of approved tint on wall surfaces |
| 33 | M&L for two coats of Oil bound distemper of approved tint on ceiling surfaces |
| 34 | Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of Oil bound distemper complete all as specified and as directed. |
| 35 | Preparation of old treated plastered ceiling surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying one coat of Oil bound distemper complete all as specified and as directed. |
| 36 | M&L for preparation of old surfaces of wood and wooden based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint. |
| 37 | M&L for preparation of old painted steel surfaces of any description over 10 cm girth or width and applying one coat of synthetic enamel paint. |
| 38 | M&L for preparation of old decorated plastered/ unplastered surfaces of wall and applying two coat of plastic emulsion paint complete all as specified and as directed. |
| 39 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of plastic emulsion complete all as specified and as directed. |
| 40 | M&L for preparation of old plastered surfaces of wall and applying two coat of lustre paint complete all as specified and as directed. |
| 41 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of lustre paint complete all as specified and as directed. |
| 42 | M&L for preparation of old plastered surfaces of wall and applying two coats textured paint including base coat of asian paints or equivalent complete all as specified and as directed. |
| 43 | M&L for fixing of 3D wall paper (selected colour) including complete removal of existing tretment on wall and applying 1 to 1.5 mm thick wall care putty , scrubbing with sand paper to make a surface smooth complete all as specified and directed. |
| 44 | M&L for preparation of old wooden/wood base surfaces of wall/floor and applying two coat of malamine polish including filling of cracks and holes etc complete all as specified and as directed. |
| 45 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. |
| 46 | S&F for 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. |
| 47 | M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified. |
| 48 | S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. |
| 49 | S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified. |
| 50 | S&F rotational moulded polyethylene water storage tank of 500 litres capacity 3 layer black/white colour (as approved) with following specifications, Extra heavy duty, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) , cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make :- Sintex or equivalent |
| 51 | -Ditto- all as per item No 50 here in before but 1000 Ltrs capacity complete all as specified and directed. Make :- Sintex or equivalent |
| 52 | S&F for repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long ARM P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor all as specified. |
| 53 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern) EWC white, including trap, connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified. |
| 54 | Supply and fix in repairs one piece vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 690 x 360 x 765 mm, S/P trap 300 mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Cera Cat Pt No – S1013241VS or equivalent make as approved by GE. |
| 55 | S&F in repair white counter top Basin (self-rimming) Rectangle shape of size 605 x 395 x 120 mm fixed in position including 32mm brass CP waste coupling and PVC waste pipe, 32mm dia. complete Make: Cera Cat. No. S2020141 or equivalent make as approved by GE. |
| 56 | S&F in repair white one piece full pedestal type wash hand basin of size 550 x 400 x 200 mm with pedestal height 820mm fixed in position including 32mm brass CP waste coupling and PVC waste pipe complete Make:CERA Cat Pt No *Cat. No. S2040157 or equivalent make as approved by GE. |
| 57 | S&F in repair vitreous china Urinal, Half stall type, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete all as specified. |
| 58 | S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including CP brass waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified. Make: Cera or equivalent |
| 59 | S&F in repair 32mm dia PVC waste pipe for WHB/kitchen/urinal sink of length 1.0m including fixing the same complete all as specified and directed Make:Prayag or ISI marked |
| 60 | S&F in repair 600mm x 450mm looking mirror of selected quality glass of thickness not less than 5.50mm,with PVC frame and 4mm thick MDF board back fixed to wall with suitable SS screws complete all as specified. |
| 61 | S&F in repair bevelled edge looking mirror of any size of selected quality glass of thickness not less than 5 mm, fixed to wall with SS studs complete all as specified. |
| 62 | S&F in repair cabinet mirror plastic body for toilet of size 400mm x 500mm with 4mm thick looking mirror complete all as specified.Make : Prayag Cat No. 554 or equivalent |
| 63 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 940 x 457 mm, bowl depth 203MM all as specified.Make:CERA Cat Pt No B4512122 or equivalent |
| 64 | S&F in repair Single bowl sink manufactured from 1.0 mm thick 304 grade Gloss finish stainless steel Size: 610 x 455 mm (24\\" x 18\\") Depth: 255 mm (10\\") Installation: Top mount including waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall all as specified.Make:CERA Cat Pt No Cat. No. B4511101 or equivalent |
| 65 | S&F in repair of stainless steel plate rack of size 30\\" X 36\\" X 10\\" complete all as specified. |
| 66 | S&F in repair 15 mm bore Stop/concealed valves , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed all as specified. |
| 67 | S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore, ISI marked complete all as specified and as directed. |
| 68 | S&F in repair glass shelf of size 500x125mm(drop) with chomium plated railing fixed with and including chromium plated bracket complete all as specified.Make:CERA or equivalent |
| 69 | S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and including chromium plated bracket complete all as specified.Make:CERA Cat Pt No F5005102 or equivalent |
| 70 | S&F in repair corner glass shelf of size 200mm dia and 8mm thick with chomium plated railing fixed with and including chromium plated bracket complete all as specified.Make:CERA Cat Pt No F5005101 or equivalent |
| 71 | S&F in repair hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make: CERA Cat Pt No F8030107AB or equivalent |
| 72 | S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make:CERA Cat Pt No Cat. No. F5014106CH or equivalent |
| 73 | S & F in repair Brass Chromium plated towel rail 600mm long fixed with brass/stainless screws complete all as specified and directed. Make:CERA Cat Pt No Cat. No. F5013103CH or equivalent |
| 74 | S&F in repair brass chromium plated towel ring fixed with brass/stainless screws all as specified and directed. Make:CERA Cat Pt No F5013115CH or equivalent |
| 75 | S & F in repair Brass Chromium plated towel rack fixed with brass/stainless screws complete all as specified and directed. Make: CERA Cat Pt No Cat. No. F5013121CH or equivalent |
| 76 | S&F in repairs bib cock long body quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Make:CERA Cat Pt No G1017152 or equivalent |
| 77 | S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Make:CERA Cat Pt No F1015151CH or equivalent |
| 78 | S&F in repairs washing machine cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified.Make:CERA or equivalent |
| 79 | S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make:Prayag Cat Pt No DEW CQ322L CERA BC 1781 or equivalent |
| 80 | S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified.Make:CERA Cat Pt No F1005101GG or equivalent |
| 81 | S&F in repairs extended body wash basin mixer 305mm ht and 190 mm spout length with 2 Nos 600 mm long braided PVC connections suitable for 15mm bore pipe fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified.Make:CERA Cat Pt No F1005453BA or equivalent |
| 82 | S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: CERA cat part no. F1005401GG or equivalent make as as approved by Engr-in-chagre. |
| 83 | S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make:CERA Cat Pt No F1005201GG or equivalent |
| 84 | S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified.Make:CERA Cat Pt No F1005151GG or equivalent |
| 85 | S&F in repair stainless steel over head shower100x 100 mm size with 250 mm long arm all as specified. Make: CERA Cat Pt No Cat. No. F7020110SS or equivalent |
| 86 | S&F in repair stainless steel over head shower 300x 300 mm size with 450 mm long arm all as specified. Make: CERA Cat Pt No Cat. No. F7010214SS or equivalent |
| 87 | S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make:CERA Cat Pt No Cat. No. F5013109CH or equivalent |
| 88 | S&F in repair Square grating 100mm x 100mm size of steel CP with/without hole including cockroach trap all as specified. |
| 89 | S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete all as specified. |
| 90 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified.. |
| 91 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified.. |
| 92 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified.. |
| 93 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified.. |
| 94 | S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified.. |
| 95 | S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified.. |
| 96 | S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified.. |
| 97 | S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified.. |
| 98 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified. |
| 99 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified. |
| 100 | S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as directed |
| 101 | -Ditto- all as per item No 100, here in before but on 75mm dia of bore |
| 102 | M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed. |
| 103 | S&F in repair of door seal made out of aluminum section/flat colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified |
| 104 | Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed. |
| 105 | Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 106 | M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 107 | Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed. |
| 108 | Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings complete all as specified and as directed. |
| 109 | Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 110 | M & L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. complete all as specified and directed |
| 111 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed. |
| 112 | -Ditto- all as per item no 111 above here in before but plain sheets on riges,valley gutters and similar works etc complete all as directed |
| 113 | S&F 6 mm thick polycarbonate fibre glass plain sheet hollow section fixed with coach screw and washer fixed to iron frame work complete all as per specified and as directed |
| 114 | Dismantling of wall/ceiling board of any description and any thickness including cover fillets, ceiling grid etc complete all as directed. |
| 115 | Material and labour for 7-8 mm thick PVC laminated mineral board false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). |
| 116 | Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed |
| 117 | All as per item No 116 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed |
| 118 | Taking down shutters of any description not exc. 1.00 sq. m each complete all as specified and directed |
| 119 | All as per item No 118 above but exc 1.0 sq. m but n exc 2.0 sqm each complete all as specified and directed |
| 120 | S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed. |
| 121 | S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 122 | M&L for powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specified |
| 123 | S&F for powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150 mm handles 2 Nos in each shutter, 200 mm tower bolt 01 No in each shutters , 100 mm 03 Nos stainless steel hinges in each shutter, anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 124 | S&F 5mm thick Sheet glass, selected quality, in squares exc. 0.5 sq. m each pane glass, each pane fixed with aluminum frame work complete all as directed |
| 125 | S&F in 5-6 mm thick ACP (Aluminium composite panel) Sheet of selected quality, fixed with aluminum frame work in aluminium doors including aluminium beading and neoprene rubber complete all as specified. |
| 126 | S&F in repair 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed |
| 127 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 128 | S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, all as specified and directed. |
| 129 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. |
| 130 | M&L for second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned atjoints, supplied and fixed complete all as directed |
| 131 | S&F for second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats including two coat of synthetic enamal paint over one coat of pink primer all as specified and directed. |
| 132 | S&F for 35 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 133 | S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm. |
| 134 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed. |
| 135 | S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed. |
| 136 | S&F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any height of Bldg including necessary scaffolding etc complete all as specified. |
| 137 | Ditto- all as per item no 136 above but figured/frosted glass as lourvers complete all as specified. |
| 138 | S&F in repair Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 139 | S&F in repair 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified. |
| 140 | S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and directed. |
| 141 | S&F in repair 250 mm long Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and including a mini of 6 bolts and nuts, four on bolt plate and two on staple plate (selected quality as approved ) all as specified. |
| 142 | S&F in repair stainless steel tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 143 | S&F in repair stainless steel tower Bolt of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 144 | S&F in repair stainless steel handle of 150 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 145 | S&F for floor door stopper of SS body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed. |
| 146 | S&F in repair for floor door stopper of brass body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed. |
| 147 | S&F in repair 20 mm bore mild steel drapery rod with 1 mm thick PVC wood grain coating including knobs complete all as specified and directed.. |
| 148 | S&F in repair bracket for above mentioned curtain rod fixed with rawl plug and screws compete all as specified. |
| 149 | S&F in repair drapery curtain rod of stainless steel 20mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified. |
| 150 | S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw compete all as specified. |
| 151 | S&F in repair stainless steel hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 152 | S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. includinguding taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 153 | S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 154 | S&F auto closing hinges with stainless steel screws including taking down with existing one complete all as directed |
| 155 | S&F in repair auto closing hinges with stainless steel screws including taking down with existing one complete all as directed |
| 156 | S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed. |
| 157 | S&F stainless steel handle of 75 mm size (modular selected quality of design as approved) fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 158 | S&F in repair stainless steel handle of 75 mm size (modular selected quality of design as approved) fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 159 | S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed to door complete all as specified |
| 160 | S&F in repair brass heavy duty in built lock with 2 handels and 03 keys ,vertical type, fixed in door complete all as specified Make : Goodrej or equivalent |
| 161 | Dismantling of boarding, any description, fixed in any position with nails complete all as directed. |
| 162 | M&L for 2nd class softwood palin fillets, squar/rectangular in section, clean sawn, secured with nails or brads sec exc 13 sqcm but n exc 25 sqcm including dismantling of existing complete all as specified and directed. |
| 163 | M&L for 12mm thick plywood, grade BWR,type BB, number of ply 09 nos, fixed with fevicol and nails for working table/storage almirah to the size and pattern fixed with wooden frame work, including taking down existing plywood complete all as directed |
| 164 | S&F for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work complete all as directed |
| 165 | M&L for preparation of new wood or wood base surfaces and applying malamine polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as directed. |
| 166 | Dismantling and refixing of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry complete all as specified and as directedNOTE: This item of work is to be operated upto 15m Building Height. |
| 167 | Dismantling Single layer Manglore Pattern or similar tiles in roofing and rubbish off the premises complete as as specified and as directed |
| 168 | S & F of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry incl dismantling of existing tiles complete all as specified and as directedNOTE: This item of work is to be operated upto 15m Building Height |
| 169 | S & F of Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 incl dismantling of existing tiles complete all as specified and as directedNOTE: This item of work is to be operated upto 15m Building Height |
| 170 | M&L for second class hardwood battens squar/rectangular in section at 30 cm centres, Clean sawn secured with nails or brads sec exc 5 sqcm but n exc 15 sqcm including dismantling of existing complete all as specified and directed.NOTE: This item of work is to be operated upto 15m Building Height |
| 171 | M&L for non metalic rain water gutter system along all acessories/ fitting and down pipe/ spout (model no K35) complete all as specified and directed.Make :- Monier LUXRON or equivalent. |
| 172 | S&F in reapirs AC Eaves/ Weather Boarding 12mm thick , any size shape and design as approved by GE including taking down existing boarding and two coat of exterior emulsion paint over a coat of primer complete all as specified and as directed.Make: V-Board(Visaka Industries Ltd)/EverestNOTE: This item of work is to be operated upto 15m Building Height |
| 173 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender