Tender For Repair /Maint Of Short Range, Singhpur Range, Bravo Flt, Fencing And Misc B &R & E/M Works At Tech Area Af Stn Gwalior.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
7 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maint Of Short Range, Singhpur Range, Bravo Flt, Fencing And Misc B &R & E/M Works At Tech Area Af Stn Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting of all bushes ,grass and sarcandas, shrubs, vegetation etc including trees n.exc 30 cm girth and removing the material exc 500m and n. exc 1 KM complete all as specified and directed. |
| 2 | Ploughing to existing ground area with any type of sand /soil and filling crater of any size and depth with mechanical devices or manually, spill cross (Double) or both way complete including removal of all bushes grass and leveling all as specified and directed by Engineer -in-charge. Notes :- (a) For ploughing to existing ground of both side (i. e one side and cross) shall be measured as one complete operation. (b) Filling the crater by locally available soil which is obtained from crater. |
| 3 | M&L for Supply of Saw dust and mixing with sand in particular ratio as per user requirement for spreading on Fd Target target area complete all as specified and directed. (Note: Supply of Sand and Filling of Mixture on Fd Target Area shall be measured and Paid Searately. |
| 4 | Supply only Sand (passing through 4.75 mm IS sieve) for Fd Target area/ Firing Butt all as specified and directed by EIC. |
| 5 | Forming earthen band above ground level including raising of sand and saw dust mixture, ramming and finishing of top surface up to a height ot 6 mtr manually or machenically in required slope at target area as per user requirment complete all as specified and directed by Engr-in-charge . Note : Before laying of sand and saw dust mixture the existing ground should be loosened and sieving through 4.75mm sieve for extraction of fired bullets remnants. |
| 6 | M&L for PP (poly propylene) woven bag of bright white colour 30 Kg capacity (Approx) by filling with sand/soil and laying at site as per user requirement complete including removing old deteriorated bags from site out of defence land all as specified and directed by Engineer-in-Charge. Note :- Sand / Soil for filling is available at site. |
| 7 | Demollition of cement concrete (unreinforced) including floor tiles, ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed . |
| 8 | M&L for Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plinths, kerbs, haunching, rounded or chamfered on edges, coping , floor finishes etc incl necessary form work. |
| 9 | M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone agg) as in sub base of flooring for levelling course complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( backing, screed/plaster) any number of layers), rubbish off the premises. |
| 11 | M&L for non skid coloured ceramic tiles 7-8mm thick area of each tiles exc 0.06 Sqm but not exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 12 | M&L for glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement including 10mm thick rendering on brick work or concrete surface other than fair faces in CM 1:4 complete all as specified and directed. |
| 13 | M&L for 7 to 8 mm thick Non-skid ceramic premium tiles, matt finish, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement match with tiles over 15mm thick screed bed in CM 1:6 to complete all as specified and directed. |
| 14 | All as per item No.13 here in before but as in skirting etc. but over 10 mm thick rendering in cement plaster 1:4 complete all as specified and directed. |
| 15 | M&L for 10mm thick designer parking/foopath vetrified tiles of size 300x300mm any colour and pattern, jointed and pointed on neat cement slurry as in floors including 20 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 16 | Demolition of stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid in any type of mortor complete all as specified and directed. |
| 17 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing over 15mm thick screed bed in CM 1:4 to complete all as specified and directed. |
| 18 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, pillar, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 19 | M&L 75mm thick, PCC 1:3:6 Type C-2 ( using 40mm graded stone aggregates) as in sub base complete all as specified and directed. |
| 20 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 21 | All as per item No 20 but except paver blocks refixing only. |
| 22 | M&L for factory made kerb stone of cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 23 | S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic) decorative finish including E-grid suspended false ceiling grid system 600x600mm with main runner 33x24x0.6mm, cross tee 25x24x0.6mm and wall angle 19x22x0.4mm ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fasteners to RCC Roof or from purlin with butterfly clips hold down clips etc from soffit at approx 1.20mtr centre to centre including dismantling of old unserviceable false ceiling with grid any discription complete all as specified and directed. |
| 24 | S&F in repairs 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) sheets decorative finish to existing false ceiling grid complete all as specified and directed. |
| 25 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed incl demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed. |
| 26 | All as per item No. 25 here in before but except bricks. |
| 27 | M&L for 15mm thick rendering on brick or concrete surfaces of walls in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L for 15mm thick rendering on brick masonry walls in CM 1:6 finished even and smooth without using extra cement including Taking down old cement plaster on brick surface or concrete, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 29 | M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of primer white or tinted as approved all as specified and directed. |
| 30 | M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emultion white or tinted over a coat of primer as approved complete all as specified and directed. |
| 31 | Taking down shutters of any description exc 1Sqm but n. exc 2 Sqm each complete all as specified & directed. |
| 32 | Taking down chowkats with shutters (without taking off shutters from the frames) of any description n. exc 1.5 Sqm each complete all as specified & directed |
| 33 | Taking down chowkats with shutters (without taking off shutters from the frames) of any description exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified & directed |
| 34 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 35 | S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 36 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with galvanized wire staples/ wooden beading to wooden/steet window/vents complete all as directed. |
| 37 | M&L for preparing of new wood surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 38 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. |
| 39 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), With Wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 40 | S&F 150 mm Butt hinges, medium weight, stanless steel, fixing with zinc coated screws complete all as specified and directed. |
| 41 | S&F Powder coated aluminium frame for door, window, ventilators and partitions with extruded built up standard tubular sections with necessary jointing aluminium cleats using C.P./ stainless steel screws, all as specified and directed by Engr-in-Charge. |
| 42 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make and the dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as specified and directed |
| 43 | S&F 5.5mm thick Sheet glass, selected quality, in squares and all as specified and directed by EIC. |
| 44 | S&F 4mm thick Aluminium composite panel on aluminium doors, windows and partitions in squares with rubber neoprene gasket and aluminium beading and all as specified and directed.(aluminium beadings shall be paid separately |
| 45 | S& F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and all as specified and directed. |
| 46 | S&F 150mm long Extruded aluminium alloy handles, fabricated type, complete all as specified and directed . |
| 47 | S&F 150mm long aluminium barrel tower bolts, of extruded section complete all as specified and directed . |
| 48 | S&F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed |
| 49 | S&F in repair rubber neoprene packing to aluminium door and windows including removing glass, beading and refixig the same in its position complete all as specified and as directed. |
| 50 | S&F in repairs 5mm thick glass, and glazing in squre to aluminium frame with suitable beading in each pane. |
| 51 | S&F in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty n exc 0.50 Sqm in each pane complete |
| 52 | S&F in repairs 18mm thick Rajshri PVC Celuka ply of both side laminated wood grain to make cub board/cabinet shutter/drawer front shutters complete as per specifications and as directed by the Engr in charge. |
| 53 | S&F 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws . |
| 54 | S&F Stainless steel handles 100mm size decorative type for kitchen cabinets/ cub boards shutters as per specifications and as directed by the Engr in charge. |
| 55 | S & F Continuous (piano) hinges, mm width of flaps mild steel, bright finish or electrogalvanised and as directed. |
| 56 | S&F in repair 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 57 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed. |
| 58 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), P- Type/ S-Type any colour (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. |
| 59 | S&F in repairs PVC Seat cover for water closet pan (pedestal pattern), matching colour including fixing bolts. |
| 60 | S&F in repair Vitreous China urinals half stall flat back white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including CP Urinal spreader for fixing with 15 mm dia PVC pipe and Brass CP 32mm dia waste coupling with PVC waste pipe & Grating complete all as specfied and directed. |
| 61 | S & F in repair vitreous china wash basin, white, flat back size 550 X 450mm including 32mm Brass CP waste Coupling, PVC Waste pipe and Grating complete all as specified and directed. |
| 62 | S&F in repair 15mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. complete all as specified and directed. |
| 63 | S&F in repair 20mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc.complete all as specified and directed. |
| 64 | M&L for Cutting chases for concealed water tubing or concealed conduit wiring, etc. making good to facings where required and pointing in cement mortar 1:3 not exc 10 cm girth complete all as specified and directed. |
| 65 | S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed. |
| 66 | S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed. |
| 67 | S&F in repair for 50 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed. |
| 68 | S&F 110mm PVC(SWR) bends complete all as specfied and directed. |
| 69 | S&F 75mm PVC(SWR) bends complete all as specfied and directed. |
| 70 | S&F 50mm PVC(SWR) bends complete all as specfied and directed. |
| 71 | S&F 110mm PVC(SWR) junction single, (Single T) eual or unequal complete all specfied and directed. |
| 72 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specfied and directed. |
| 73 | S&F in repair chromium plated fency type bib taps long body cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed. |
| 74 | S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 75 | S&F in repairs Brass CP, fancy type 15mm bore two way Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 76 | S&F in repairs Brass CP, fancy type 15mm bore Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 77 | S&F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 78 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 79 | S&F in repairs Brass CP, fancy type 15mm bore Cocealed stop cock with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 80 | S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) and Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed. |
| 81 | S&F in repair lookig mirror, bevelled edge of size (900 mm x 600 mm x 6 mm) having four holes at corners fixed to walls with CP Brass screws with fancy type head top coplete all as specified ad directed by Engr-in-Charge. |
| 82 | S&F in repair 500 lit capacity rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 83 | S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with necessary beading and nut bolts to steel windows/vents etc complete all as specified and as directed. |
| 84 | Cleaning sewage line, rodding thoroully, watering complete removing blokages all as specified and directed. |
| 85 | Cleaning man holes, up to 1.5mtr depth, removing sluge, watering complete all as specified and directed. |
| 86 | Demollition of cement concrete (unreinforced) as in roof with old APP membrane and screed plaster and in any position not otherwise, other than ground floors and removing the demolished material out of MoD land complete all as specified and directed . |
| 87 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in and levelling course etc over roof surface complete all as specified and as directed. |
| 88 | M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of \\"BoQ\\") |
| 89 | S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm over primed surface with bituminous primer @ 0.30 liters/Sqm surface by forced application complete all as specified. |
| 90 | Supply only liquid water proofing compound complete all as specified and directed. |
| 91 | M&L for Applying a coat of aluminium paint over APP membrane surface complete all as specified and directed. |
| 92 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including minor repair work and filling the joints with cement and pigmet etc complete all as per directed by Engr-in-charge. |
| 93 | M&L for Preparing old painted wooden surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 94 | M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 95 | M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of weather coat exterior emulsion paint including filling cracks/depressions with putty/POP to make the adjacent surface even and smooth complete all as specified and directed. |
| 96 | M&L for Preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions with wall care putty and applying one coat of distemper oil emulsion by roller complete all as specified and directed by Engr-in-Charge. |
| 97 | M&L for Preparation of old decorated surfaces of wall removal of nails, loose layers, rubbing with sand paper etc & filling cracks/hole with wall care putty and applying one coat of white wash complete all as specified and directed. |
| 98 | Ditto as per item No 97 above but on ceiling surface complete all as specified and directed. |
| 99 | M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and prepare the surface by filling the cracks/ depressions with wall putty/POP to make the surface even and smooth and applying two coats of oil emulsion distemper by roller over a coat of primer over a coat of putty of any type of buildings up to any height complete all as specified and directed. |
| 100 | M& L for preparation of surfaces of floors / concrete floors (Chequerred / Interlocking tiles) and applying floor painting with ready mixed paint, for use on floors each coat complete all as specified and directed. |
| 101 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 102 | S&F MS steel sections ( angle, flat, MS plate/ sheet, bars etc) as in gates, door frame, window grills, hung type grilled gates, grating,etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, including MS hinges/ pintle hinges, stops, hand-made sliding bolts, etc. railings, framework of watertanks and similar work conforming to Fe.290.Gde-E-165 |
| 103 | S&F mild steel Tubular steel sections for shed, trussed, rafters, purlins, vertical post and fastenings and framing jointed with angle cleat, MS Flat MS plates clutting, welding necessary drilling holes and distance pieces, cleats etc. complete all as specified and directed. Make: ISI Marked as approved by GE. |
| 104 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismentling of existing Plain or corrugated steel complete all as specified and directed. |
| 105 | M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 106 | Dismantling of posts, struts (wood, steel or RCC) any section including taking out embedded portion in concrete or brick masnory of any position place incl swan neck fencing and making good disturbed portion removing excavated debries up to a distance n.exc 50M complete all as specified and as directed by Engr-in-Charge. |
| 107 | Fixing only in repairs of 4mm dia chain link fencing, of mesh (50mmx50mm) size, of any type to angle iron with MS Flat Iron, and fencing will be strengthened by fixing MS flat/round bars horizontally complete all as specified and directed. Note: (i) S&F of FI, Angle, round bar & bolts shall be measured and paid separately. (ii) Supply only of chain link fencing shall be measured and paid separately. |
| 108 | Supply only 4mm dia galvanised steel chain link fencing of mesh size 50mmx50mm with both ends of the fabric without knocking and twisting any size complete all as specified and directed. |
| 109 | S&F flat Iron, mild steel for securing chain link fencing, wind tie, welded to each other complete all as specified and directed by Engr-in-Charge. |
| 110 | S&F 12mm round bar for securing for securing chain link fencing, cutting, welded to each other complete all as specified and directed by Engr-in-Charge. |
| 111 | S&F of mild steel screw bolts (machine made) 10 to 15mm dia of neck and length exc 5cm but n'exc 10cm, with hexagonal or square heads at one end and screwed ends fixed with two washers and one nuts complete all as specified and directed. |
| 112 | S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and including galvanised MS wire, staples or steel pin etc complete all as specified and directed. Note :- Each line of wire to be measured. |
| 113 | M&L for mild steel angle Iron fencing post including cutting and welding tops to shape as directed, drilling holes, notching for wire etc fillets including necessary drilling, bolting or riveting and similar works, conforming to Gde-165 complete all as specified and directed. Make: ISI/BIS Marked As approved By GE. |
| 114 | Excavating in post holes (or similar holes) each n. exc 0.25 cu. m, getting out and removal of excavated earth up to a distance of 50 mtr complete all as specified an direced. |
| 115 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in foundation, filling fencing post and mass concrete, sub base finished even and smooth without using extra cement including necessary formwork complete all as specified and directed. |
| 116 | S&F in repair concertina rozor wire coil of any dia (cross type) hot dip galvanized steel wire of high tensile spring centre core wire, High carbon spring steel wire, heavy zinc coated in fencing work complete all as specified and directed. |
| 117 | Complete removal of existing treatment on wall surface (any number of layers) of and applying three coats of white wash complete all as specified and directed. |
| 118 | M&L for hybrid (acrylic+ polyurethene) based waterproofing flexible liquid applied membrane single component, three coat system reinforced with fibre mesh having crack bridging upto 2mm and elongation upto 200% and dry film thickness(DFT) 1000 microns with Heat reflective system for all types of exposed roof slabs (new and old) terraces (sloped and flat) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender