Tender For 1.Construction Of Aunganwadi Building At Vedarthettakal Village Head Of Kattagaram Estimate Amount : 17.25 Lakhs
Tender Value
17.25 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
3 days left
EMD
18000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Krishnagiri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 1.Construction Of Aunganwadi Building At Vedarthettakal Village Head Of Kattagaram Estimate Amount : 17.25 Lakhs
BOQ
| Sl. No. | Item Description |
| 1 | 1.Construction of Aunganwadi Building at Vedarthettakal Village H/O Kattagaram Estimate Amount : 17.25 Lakhs |
| 2 | Earth work excavation for foundation in all class of soils except hard rock requiring blasting including cost and conveyance of all etc.,complete |
| 3 | Supply and Filling of River Sand including cost and Conveyance of all site etc. Complete. |
| 4 | Supply and Filling the basement Excavated earth other than sand including cost and Conveyance of all site etc. Complete. |
| 5 | Cement concrete 1:4:8 Using 40mm ISS size Hand Broken granite stone Jelly for Foundation and Flooring including labour charges for mixing concrete watering and laying the concrete in layers |
| 6 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 7 | Centering For BGL |
| 8 | For Column |
| 9 | Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS |
| 10 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs |
| 11 | Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. . |
| 12 | Plastering in cm 1:4, 20mm thick including cost and conveyance of all etc.. Complete |
| 13 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 14 | Plastering in cm 1:3, 10mm thick including cost and conveyance of all etc.. Complete |
| 15 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 16 | Supplying & fixing of Steel door (1.10 x 2.10m) etc., complete |
| 17 | Supplying & fixing of Steel door (0.75 x 2.10m) etc., complete |
| 18 | Labour charges for fixing doors alongwith frames in position etc., complete (finished work) (SoR 2023-2024 / PG. No. 28 / Unique No. W-0152) |
| 19 | Supplying of Steel windows (1.20 x 1.60) etc., complete |
| 20 | Labour charges for fixing windows and ventilators alongwith frames in position etc., complete. (SoR 2023-2024 / PG. No. 28 / Unique No. W-0153) |
| 21 | Supplying of Steel Ventilator (0.60 x 0.60) etc., complete |
| 22 | Supplying of Steel Ventilator (0.90 x 0.45) etc., complete |
| 23 | Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dses |
| 24 | Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth |
| 25 | Dadooing of walls with colour glazed tiles of size 150x150x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc |
| 26 | Paving the floor with coloured joint free virtified tiles of size 600x600x8mm of best quality and approved variety complying/conforming ISI specification land over cement mortar 1:3(one of cement and three of sand) 20 mm thick and pointed with same colour cement neatly etc., all complete |
| 27 | Distembering two coats including priming coat with best approved distember and primer including costand conveyance of all materials to site and all labour charges etc |
| 28 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 29 | Painting two coats over new irons with good quality of Enamel Paint including cost and conveyance of all etc.. Complete |
| 30 | Supplying and fixing in position best Indian make White glazed earthen ware Oriya type Indian Water Closet including cost and conveyance of all etc.. Complete |
| 31 | Cost and Supply of AC Exhaust Fan 225mm (9\\") Sweep (Light Duty) for all Cost for etc Complete |
| 32 | Flooring with Cuddapah slabs 50mm thick over a bed of concrete 100mm thick and pointed with cement mortar 1:3 -10 Sqm including cost and Conveyance of all site etc. Complete. |
| 33 | Provision for 1000 Ltr HDPE Tank |
| 34 | Cost of 32mm Dia PVC Pipe 10 KSC |
| 35 | 110mm PVC Pipe 6 KSC |
| 36 | Provision for Baby Pan with Fitting and Specials and Labour Charges etc copmlete |
| 37 | Provision for Cartoon Painting |
| 38 | Provision for Electrification |
| 39 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 20 |
| 40 | Light Point |
| 41 | Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges |
| 42 | Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC plug point (SD No.38) 5 pin plug point |
| 43 | Plug Point |
| 44 | Supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 106 |
| 45 | Ceiling fan |
| 46 | Supply and fixing of water tight Bulk Head fitting with guard (Philips / Bajaj / Crompton / Klite) suitable for incandencent lamp and 60W bulb (SD N0.83) |
| 47 | Bulk head fitting |
| 48 | Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64) |
| 49 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125) |
| 50 | Supply and run of 2x4 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70 |
| 51 | Supply and Fixing of 16 Amps DP Switch of 500V with Metal Clad with Fuse and Neutral SD 142 |
| 52 | Provisions for EB service connection deposit charges |
| 53 | Provision for Rainwater harvesting Structure |
| 54 | Provision Cuddapah Sink |
| 55 | Provision for writing Name board |
| 56 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender