Tender For Repairs, Renovation & Periodical Services To Bldg No. 260 (F&A Section) Inside Cfa
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
17 days left
EMD
39300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs, Renovation & Periodical Services To Bldg No. 260 (F&A Section) Inside Cfa
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement Concrete of any description and in any position |
| 2 | M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate), 70mm as directed. |
| 3 | M&L for Chequered cement concrete tiles with grey pigment cement and pigment, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed of CM 1:6, 15mm thick. |
| 4 | Dismantling boarding, any description, fixed in any position with nails |
| 5 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. removal to Store (measured overall as fixed along the centre line over fittings and accessories) as directed |
| 6 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets as directed. |
| 7 | M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions |
| 8 | M&L for 3mm thick wall care putty on ceiling and Priming surfaces with alkali resistant priming paint 01 coat on ceiling as directed. |
| 9 | M&L for Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth with alkali resistant priming paint 01 coat on wall as directed. |
| 10 | S&F of PVC insulation panels thickness 10 mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceilingas directed |
| 11 | S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 12 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including M&L for screed bed of 15mm thick CM 1:6 as directed |
| 13 | S&F Steel work in tubular trusses and purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 14 | S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thickof any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified |
| 15 | S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 16 | M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width, Type C1, 1:3:6 (20mm graded aggregate) set in CM 1:4, complete as directed. |
| 17 | M&L for Rendering 12mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 as directed. |
| 18 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc as directed |
| 19 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) and removing to CW store as directed |
| 20 | Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc. 4 sq.m each with shutters (without taking off shutters from the frames) and removing to CW store as directed |
| 21 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.as directed |
| 22 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 23 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 24 | S&F of Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane,4mm thick as directed |
| 25 | S&F of Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane,4.8mm thick as directed add cooling glass |
| 26 | S&F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 as directed. |
| 27 | M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed using 2nd class Hardwood as directed |
| 28 | S&F for Flush shutters,30mm thick solid core construction, with particle board core and plywood face panels, two face is covered with deco rative face veneer with lipping/frame to match as directed |
| 29 | S&F of Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, 125mm as directed |
| 30 | S&F of 200 mm brass barrel tower bolts, with extruded section barrel and rolled or cast bolts and fixed as directed |
| 31 | S&F of Brass, 4 levers, Mortice lock, vertical type, size100 mm |
| 32 | S&F of Extruded brass handles, fabricated type polished 150mm as directed. |
| 33 | S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 34 | M&L for Prelaminated particle board, 12 mm thick interior grade, one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work |
| 35 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick - Colour (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry with spacer joints of 3 mm and filled with epoxy grout to match the tile colour including M&L for Screed bed of15mm thick using CM 1:4. |
| 36 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including M&L for plastering 15mm thick in CM 1:4 |
| 37 | S & F of Vitreous china premium/ 1st quality wash down water closet EWC white closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. with 10 litres vitreous China valveless,syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete in all respect all fixed in repairs as specified. |
| 38 | S & F PVC (SWR) pipes 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls |
| 39 | S & F PVC (SWR) bends 110 mm dia. |
| 40 | S & F PVC (SWR) bends 110 mm dia with access door. |
| 41 | S & F PVC (SWR) multi floor trap (75 mm), plain with grating including jointing with solvent cement as directed |
| 42 | S & F PVC (SWR) pipes (75 mm bore) single socketed, in any length with rubber ring joints, laid in trenches or in floors as directed |
| 43 | S & F PVC (SWR) bends 75 mm dia. |
| 44 | S & F PVC (SWR) bends 75 mm dia with access door. |
| 45 | S & F 15mm Bore dia. chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 46 | S&F of Stop valves, fancy type, chromium plated 15 mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 47 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 CPVC PIPE OUTER DIAMETER 25mm fittings on walls/ceiling or laying in floors complete all as specified as directed. |
| 48 | S & F of Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 49 | S & F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 50 | S & F of Vitreous China wash basin, white, flat back, size 550x400mm including brackets and Waste fittings 40 mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
| 51 | S & F of PVC connections 15mm size with PTMT nuts of length 450mm |
| 52 | S & F of Fancy type 15 mm Pillar taps for wash basin , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as directed |
| 53 | Cutting chases in brick wall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 54 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 55 | Cutting holes into or through in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete. Exc 150 sq. cm but n. Exc 400 sq. cm as directed |
| 56 | S&F of Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as directed |
| 57 | M & L for Distempering walls with white or tinted distemper oil emulsion, 02 coats and 01 coat alkali resistant priming paint including preparatory works on old surfaces as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 58 | M & L for Distempering ceiling with white or tinted distemper oil emulsion, 02 coats including preparatory works as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 59 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including preparatory works on old surfaces as directed. [Make: (Asian Apex Ultima)/ (Dulux weathersheild Max)/ (Nerolac Excel Total). |
| 60 | M & L for Painting on old wooden surfaces of any description, over 10cm width or girth, using 02 coat synthetic enamel paint including preparatory works as directed and approved by Engineer in Charge. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 61 | M & L for Painting on new steel surfaces of any description, over 10cm width or girth, using synthetic enamel paint two coat including one coat zinc chrome primer and preparatory works as directed. (Make: Asian/ Dulux/ Nerolac as approved by the EIC to be used). |
| 62 | M & L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work as directed. |
| 63 | Writing letters, using thick enamel paint (Block, Roman, Italic or Indian) 15cm high, as directed. |
| 64 | Removing excavated materials/soils exc. 1km but n exc. 5km and depositing where directed |
| 65 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc. |
| 66 | S & F of concealed wiring with copper conductor cable FRLS in heavy duty PVC conduit, PVC single core sheathed cable for One light point or one fan point controlled by one switch with 1.5 sq. mm as directed by site incharge Make:. HAVELLS/L&T/FINOLEX/ V-GUARD/PHILIPS |
| 67 | S & F of concealed wiring with copper conductor cables 2x2.5 Sqmm and 1x 2.5 Sqmm FRLS in PVC conduit for one 3 pin socket outlet, 5 amps, independent, with cable 2.5 sqmm as directed by site incharge. Make. HAVELLS/L&T/ FINOLEX/ V-GUARD/PHILIPS |
| 68 | S & F of concealed wiring with copper conductor cables 2x2.5 Sqmm and 1x 2.5 Sqmm FRLS in PVC conduit for One 3 pin socket outlet, 5amps on the same board with other switches, with cables 2.5 sq.mm size as directed by site incharge.Make. HAVELLS/L&T/FINOLEX/ V-GUARD/PHILIPS |
| 69 | S & F of concealed wiring with copper conductor cables FRLS in PVC conduit forOne 3 pin socket outlet. 15 amps, independent, with cables 2x 4 sq. mm + 1x 4 Sqmm sizeas directed by site incharge. Make. HAVELLS/L&T/ FINOLEX/ V-GUARD/PHILIPS |
| 70 | S &F of moduler Metal flush box 6 module.Make :MDS /L&T/PHILIPS/HAVELLS |
| 71 | S &F of moduler White cover plate with frame,6 module: Make: MDS /L&T/ PHILIPS/HAVELLS |
| 72 | S &F of moduler Metal flush box 3module.Make :MDS /L&T/PHILIPS/HAVELLS |
| 73 | S &F of moduler White cover plate with frame,3 module: Make: MDS /L&T/ PHILIPS/HAVELLS |
| 74 | S &F of moduler Metal flush box 4module. Make :MDS /L&T/PHILIPS/HAVELLS |
| 75 | S&F of modular White cover plate with frame, 4 module: Make: MDS/L&T/PHILIPS/HAVELLS |
| 76 | S&F of moduler Metal flush box 1/2 module. Make:MDS/L&T/PHILIPS/HAVELLS |
| 77 | S &F of moduler White cover plate with frame,2 module: Make: MDS /L&T/ PHILIPS/HAVELLS |
| 78 | S & F of Modular switch 1 way 6A, 1 module Make:MDS / L&T /PHILIPS. |
| 79 | S& F of Modular Socket, 6A-2/3 pin combined, 2 module. Make: MDS/L&T/PHILIPS. |
| 80 | S & F of Modular switch 1 way 16A, 1module. Make:MDS/ L&T/ PHILIPS/ HAVELLS. |
| 81 | S& F of Modular Socket, 6A/16A -2/3 pin combined, 2 module. Make : MDS/ L&T/ PHILIPS. |
| 82 | Fixing LED tube light fittings 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. As per site -in-charge Make MDS/HAVELLS/INDO-ASIAN. Syska |
| 83 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 84 | S&F of RCBOs for earth leakage,over load & shortcircuit protection, 40 Amps, Double pole, 30mA Make:HAVELLS/L&T/SIEMENS |
| 85 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker ( SP MCB) ,5 to 32 Amps (16 Amps in the MCB DB Complete with connection testing and commissioning as directedby site incharge .Make:HAVELLS/L&T/SIEMENS |
| 86 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker ( SP MCB),5 to 32 Amps (10 Amps) in the MCB DB Complete with connection testing and commissioning as directedby site incharge .Make:HAVELLS/L&T/SIEMENS |
| 87 | S&F of 8 way 240V single pole and Neutral Double door sheet metal enclousures for DB\\"S when MCBs to be used. Make:HAVEELS/L&T/SIEMENS |
| 88 | S&F of 4 way with 200 amps rated bus 240V single pole and Neutral Double door sheet metal enclousures for DB\\"S when MCBs to be used. Make:HAVEELS/L&T/SIEMENS |
| 89 | S&F Rigid non- metallic PVC conduit exclusive of all tees, bends,elbows, reduces,bell mouth tube ends and fixing accessories such as couplers, lock nuts saddles, pipe hooks etc. (20MM DIA conduit PVC pipe) |
| 90 | S& Fof Concealed wiring cables FRLS in PVC heavy duty ISI marked conduit including all accessories for circuit/submain copper conductor, single core cable in surface/recessed as require rewiring alongwith earthwire with the following sizes of 2x4.00 sq. mm +1x4.00 Sqmm earth wire from Main DB to Sub main DB as directed by the site incharge. Make.Havells/L&T/Finolex/ v-guard/philips |
| 91 | S& Fof Concealed wiring cables FRLS in PVC heavy duty ISI marked conduit including all accessories for circuit/submain copper conductor, single core cable in surface/recessed as require wiring alongwith earthwire with the following sizes of 2x2.5 sq. mm +1x2.5 Sqmm earth wire from Main DB to Sub main DB as directed by the site incharge. Make.Havells/L&T/Finolex/ v-guard/philips |
| 92 | S & F of concealed wiring with copper conductor cable FRLS in PVC conduct for One light point controlled by two 2 - w a y switches, with cables1.5 sq. mm size as directed by site incharge. Make. HAVELLS/ L&T/FINOLEX/ V-GUARD/PHILIPS |
| 93 | S & F Modular switch 2 way 6A, 1 module Make: HAVELLS/L&T/FINOLEX/ V-GUARD/PHILIPS |
| 94 | Brick wall cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall. |
| 95 | Exhaust Fan BLDC 150mm sweep,BLDC motor, with Louvers, Shutters, including all fixing accessories, Conforming to IS 2312/1967 with all Revisions. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender