Tender For Annual Maintenance Contract (Amc) For Steel Structural, Roof Sheet, Gate & Shed, Etc. Repair Works For The Buildings In Mk Plant Premises
Tender Value
65.54 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
7 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Contract (Amc) For Steel Structural, Roof Sheet, Gate & Shed, Etc. Repair Works For The Buildings In Mk Plant Premises
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing of damaged steel structural fully /partly such as roof/side cladding, purlin, trusses, bracings, columns, etc. i.e. MS angle, channels, plate, beam, etc. at all heights using proper tools and plants without damaging the adjacent structures including providing temporary supports for the structure at dismantled portion and nearby structures lowering the dismantled items carefully and stacking materials useful for reuse at convenient place as directed by the company authorities and depositing the waste materials in the scrap yard including all labour charges, hire charges for tools and plants loading, unloading charges, providing necessary scaffolding, safety arrangements etc. complete as per standard specification. |
| 2 | Supplying, fabrication and erection of MS steel structural such as column/beam/truss/purlins/ bracing/ plate/ brackets, etc. by using ISHB, ISMB, ISMC, ISA, Flat, Plates etc. by welded or bolted connection at all heights and levels, including cutting, welding, jointing to suit the dismantled portion for replacing the worn-out members of the existing trusses/ purlins/ bracings / column/structure or full members, etc. as directed by Engineer-in-charge with providing necessary scaffolding, safety arrangements, all conveyance charges, loading / unloading charges, etc. complete as per standard specification (Structural steel conforming to IS 2062:2011 of make TISCO/ SAIL / RINL /JSW/ AM/NS INDIA). |
| 3 | Fabrication and erection of departmental old MS steel structural such as column/beam/truss/purlins/ bracing/ plate / brackets, etc. by using ISHB, ISMB, ISMC, ISA, Flat, Plates etc. by welded or bolted connection at all heights and levels, including cutting, welding, jointing to suit the dismantled portion for replacing the worn-out members of the existing trusses/ purlins/ bracings / column/structure or full members, etc. as directed by Engineer-in-charge including providing necessary scaffolding, safety arrangements with all conveyance charges, loading / unloading charges, etc. complete as per standard specification (Departmental steel will be issued on free of cost). |
| 4 | Dismantling and removing of damaged roof sheet and side cladding fully/partly at all heights using proper tools and plants without damaging the adjacent structures, lowering carefully and stacking materials useful for reuse at convenient place as directed by the company authorities and depositing the waste materials in the scrap yard including all labour charges, hire charges for tools and plants loading, unloading charges, providing necessary scaffolding and safety arrangements, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 5 | Laying and fixing of roof sheet i.e. Departmental dismantled reusable A.C/Aluminium sheet at all heights with 8mm dia GI bolts with polymer coating & nuts (2 nos. per sqm) (white color - Aargee Associates/equivalent make) to suit the existing M.S. angle/ channel, purlin (for fixing bolt hole to be made with drilling machine only) etc. including fixing the bolt top covering with grease and end cap with providing necessary scaffolding, safety arrangements with all conveyance charges, loading/unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. (Rate excluding cost of A.C. Aluminium sheets) (Minimum required overlapping is 20cm). |
| 6 | Supplying, providing, laying and fixing of roof sheet with 1.2-2mm thick Aluminium troughed (trapezoidal) (white/colour) roof sheet (Hindalco-Everlast/ Jindal brand) at all height with 8mm dia GI bolts with polymer coating & nuts (2 nos. per sqm.) (white color-Aargee associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only) including fixing the bolt top covering with grease and end cap with providing necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 20cm). |
| 7 | Supplying, providing, laying and fixing of roof sheet with 1.2-2mm thick Aluminium corrugated (white/colour) roof sheet (Hindalco-Everlast/ Jindal brand) at all height with 8mm dia GI bolts with polymer coating & nuts (2 nos. per sqm.) (white color-Aargee associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only) including fixing the bolt top covering with grease and end cap with providing necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 20cm). |
| 8 | Supplying, providing and fixing Aluminium ridges/aluminium corner ridges (Hindal Co-Everlast/ Balco) at all heights with 8mm dia GI bolts with polymer coating & nuts (2 nos. per m) (white color-Aargee Associates/ equivalent make) to suit the existing M.S. angle / channel, purlin (for fixing bolt hole to be made with drilling machine only), including fixing the bolt top covering with grease and end cap, with edges fixing with aluminium riveted joint, with necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 20cm). |
| 9 | Supplying, providing and fixing Aluminium sheet valley gutters (0.71mm thick and 900/1200mm wide) (Hindal Co-Everlast/ Balco) / Aluminium readymade valley gutter at all heights with 8mm dia G.I. polymer coated bolts & nuts (2 nos. per m) (white color- Aargee Associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only), including fixing the bolt top covering with grease and end cap with edges fixing with aluminium riveted joint, with necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 10 | Supplying, providing, laying and fixing A.C. corrugated / troughed (Everest /Ramco brand) roof sheet at all heights with 8mm dia GI bolts with polymer coating & nuts (2 nos. per sqm.) (white color - Aargee associates/ equivalent make) to suit the existing M.S. angle/channel, purlin (for fixing bolt hole to be made with drilling machine only) including fixing the bolt top covering with grease and end cap with providing necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 20cm). |
| 11 | Supplying, providing and fixing AC ridges /AC corner ridges (Ramco /everest brand) at all heights with 8mm dia GI bolts with polymer coating & nuts (2 nos. per m) (white color-Aargee Associates/ equivalent make) to suit the existing M.S. angle / channel, purlin (for fixing bolt hole to be made with drilling machine only), including fixing the bolt top covering with grease and end cap with edges fixing with aluminium riveted joint, with necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 20cm). |
| 12 | Supplying, providing and fixing of roof sheet with 3mm thick Transparent FRP corrugated sheet (green/white) at all heights with 8mm dia GI bolts with polymer coating & nuts (2 nos. per sqm.) (white color-Aargee Associates/equivalent make) to suit the existing M.S. angle / channel, purlin (for fixing bolt hole to be made with drilling machine only) including fixing the bolt top covering with grease and end cap with necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge (Minimum required overlapping is 20cm). |
| 13 | Dismantling, removing the existing damaged and corroded M.S sheet panels at all heights of the existing gates; but retaining the original frame all round, and supplying, fabricating and fixing in position 2mm thick chequered aluminium (Jindal/Hindalco) sheet in lieu of existing sheet and bolting/riveted the same with the existing actual frame of gate @ 300mm spacing or nearest, etc., complete, as per specification and as directed by Engineer-in-charge. |
| 14 | Dismantling, removing the existing damaged and corroded M.S sheet panels at all heights of the existing gates; but retaining the original frame all round, and supplying, fabricating and fixing in position of 2 mm thick MS sheet (SAIL/VIZAG) in lieu of existing sheets and welding /bolting/riveted the same with the existing actual frame of gate @ 300mm spacing or nearest, etc., complete, as directed by the Engineer-in-charge. |
| 15 | Supplying, fabricating and fixing of required size ISI standard 'C' class heavy type GI round / square/ rectangular pipe (Jindal / Kalinga/Equivalent make) at all heights for roof, gate, partition, shed including painting the pipe with two coat with 1st quality enamel paint of approved shade (Asian/Berger/Nippon) over a coat of primer (Asian / Berger/Nippon), including necessary scaffolding, safety arrangements, etc. complete as per specification and as per the direction of Engineer-in-charge. |
| 16 | Supplying, providing and fixing of roof sheet with 0.47mm thick powder coated sheet/ powder coated end curved sheet [TATA – Durashine /JSW colouron+ (blue/red/grey)] at all heights with riveted joint/necessary fixing arrangements to suit the existing M.S. angle/channel, purlin, GI pipes, etc. including necessary scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. (Minimum required overlapping is 20cm). |
| 17 | Supplying, fabricating and fixing of required size ISI standard GI TATA Structura pipes (YST 210 grade). Square/ Rectangular / Circular at all heights of thickness 2mm-10mm for roof, side cladding, shed etc. including cutting, welding, grinding, bolt arrangements with neat finishing and necessary scaffolding, safety arrangements, etc. complete as per specification and as per the direction of Engineer-in-charge. |
| 18 | Supplying, providing and fixing MS foundation bolt of size M24 Dia at all heights and 500-750 mm depth for placing with encasing / pocket hole with required template including proper binding/welding, grouting of foundation bolts etc, complete as per the direction of Engineer in charge. |
| 19 | Supplying, providing and fixing of roof sheet with 2.8mm thick UPVC corrugated/ trafford/ trapezoidal roof sheet (Tetto Colour /Sun-Arch /Sky Tech) Colour (blue/green/white/red/grey) at all heights 8mm dia GI bolts with polymer coating & nuts (2 nos. per m) (white color - Aargee Associates/ equivalent make) to suit the existing M.S. angle / channel, purlin, GI pipes (for fixing bolt hole to be made with drilling machine only), including fixing the bolt top covering with grease and end cap with necessary UPVC rain water gutter around the shed, scaffolding, safety arrangements with all conveyance charges, loading/ unloading charges, etc. complete as per standard specification and as directed by Engineer-in-charge. (Minimum required overlapping is 20cm). |
| 20 | Supplying and fixing of 6kg PVC collecting pipe (160mm dia) (Finolex /Ashirvad) at all heights at the end of rainwater collecting bowl with suitable powder coated clamps (2-5mm thick) and necessary fittings elbow, bend, coupling, solvent cement, scaffolding arrangements, etc. complete as per the direction of Engineer-in-charge. |
| 21 | Supplying and painting two coats with epoxy coal tar paint (Asian /Berger) over a coat of epoxy zinc-chromate/zinc-phosphate primer (Asian /Berger) at all heights including chipping, scrapping and cleaning the surface, with necessary scaffolding, staging, safety arrangements, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 22 | Supplying and painting two coats with epoxy smoke grey paint (Asian/Berger/Shalimar) over a coat of epoxy zinc-chromate/zinc-phosphate primer (Asian/Berger/Shalimar) at all heights including chipping, scrapping and cleaning the surface with necessary scaffolding, staging, safety arrangements, etc. complete as per standard specification and as directed by Engineer-in-charge. |
| 23 | Supply of paints and painting two coat with emulsion paint (Asian / Berger/Nippon) 1st quality of approved shade over a coat of primer for the external/internal masonry surface at all heights from ground level, including thorough scrapping, cleaning, removal of dirt, all tools & tackles, sandpaper and scaffolding arrangements, etc. and applying putty touch-up works wherever required, etc complete as per specification and as per the direction of Engineer-in-charge. |
| 24 | Supplying, providing and laying brick masonry in CM 1:6 using well burnt country brick of minimum size 22.9x 11.2x 7cm for foundation/kerb wall/wall at all heights from ground level including all scaffolding, staging, curing, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 25 | Supplying, plastering with CM 1:4 mix 15mm thick one coat floated hard & trowelled smooth etc for floors & walls at all heights with neat finishing and necessary grouting, necessary scaffolding, staging, safety arrangements, etc. and mix with water proofing compound (Sika/Perma) for flooring work only, etc. complete complying with standard specifications and as directed by the Engineer-in-charge. |
| 26 | Supplying, providing and fixing twisted reinforcement IS 1786 HYSD bars Fe500D/Fe550D (TMT bars - TATA/ Agni/ JSW) including fabrication, cutting, bending, cold tying, with overlapping to the standard length wherever necessary and placing the reinforcement in position as per the direction of Engineer-in-charge including binding, provision of spacer bars, cover blocks and all other incidental charges, necessary scaffolding, staging, safety arrangements, etc. complete for all RCC works (item No. 27) upto4.5m height as per standard specification and as per the direction of Engineer-in-charge. |
| 27 | Supplying, providing and laying cement concrete 1:1.5:3 for RCC works height upto 4.5m using 20mm and below grade hard blue granite jelly with specified reinforcement (rate excluding the cost of reinforcement) and all mixing, laying, compaction, leveling, consolidation and curing, etc., including the cost of centering/ shuttering work, necessary scaffolding, staging, safety arrangements, etc. complete as per the specification and as per the direction of Engineer-in-charge. |
| 28 | Supplying and fixing of aluminium turbo external braced industrial wind ventilator (Runner dia: 60cm, height: 60cm & weight: 1-2kg) (Giant impex/Supreme/MPS) with necessary base arrangement, including necessary clamping etc. complete as directed by Engineer-in-charge (Rate including cost of all materials). |
| 29 | Supplying and replacing the corroded existing bolts & nuts from the existing roof sheet of the buildings at all heights in plant premises and fixing with required size new 8mm dia GI bolts with polymer coating & nuts (white color - Aargee Associates/ equivalent make) including fixing the bolt top covering with grease and end cap with necessary scaffolding, staging, safety arrangements, etc. complete as directed by the Engineer-in-charge. |
| 30 | Dismantling the existing damaged rolling shutter with supply & fixing of new 18 gauge GI rolling shutter of approved make and painted with two coat of enamel paint over a coat of Zinc-Chromate primer. GI rolling shutter is made out of 80x1.25mm GI laths interlocked together through their entire length and jointed together at the end by the end locks mounted on specially designed pipe shaft, with brackets, bearings, side guides and arrangements for inside and outside locking with push & pull operation, etc. complete to suit the clear opening as per specification and as directed by the Engineer-in-charge. |
| 31 | Supplying, providing and fixing M.S. grills/window/door of required pattern in frames of windows/Doors/grill etc. with M.S. flats, square or round bars including painting with two (2) coats of enamel paint (Berger /Asian/Nippon) over a coat of zinc-chromate primer (Berger/Asian/ Nippon) including necessary fixing, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete as per the specification and as directed by the Engineer-in-charge. |
| 32 | Supplying, providing and fixing FRP pultruded gratings (Yellow / Green /Grey colour) with FR grad resin load bearing capacity of 1000 kg/m2 (made out of I beams of 30mmx15mmx3.6mm thick at c/c 38mm with notch bar and key way at c/c 100mm) as per IS6746 UV stabilized with FR grad ISO PHTHALIC resin (grating dimension: 2430mm x 1200mm/standard dimension) and fixing with suitable bolt & nuts with washer, fastener with necessary arrangements and proper levelling with neat finishing, etc. Rates : The rate shall include the cost of all the materials and labor involved in all the operation described above including scaffolding etc, if any required etc. complete as per standard specification and as per the direction of Engineer in-charge. |
| 33 | Fitter for miscellaneous works at all heights such as levelling the existing valley gutters, leak arresting with departmental materials, etc. (Rate excluding the cost of materials). |
| 34 | Labour (Mazdoor) for miscellaneous works at all heights such as levelling the existing valley gutters, leak arresting with departmental materials, etc. (Rate excluding the cost of materials). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender