Tender For Provision Of Lighting Arrangement And Other Allied Work In Ward No. 207 Under Shahdara South Zone.
Tender Value
4.75 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
3 days left
EMD
10000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Lighting Arrangement And Other Allied Work In Ward No. 207 Under Shahdara South Zone.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable Gi box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C |
| 2 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit as required.2 X 2.5 sq. mm 1X2.5 sq. mm earth wire |
| 3 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required Single pole and neutral |
| 4 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 5 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 6 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required on wall surface as required |
| 7 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the Existing masonry open duct as required |
| 8 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/coke and salt) as required |
| 9 | Providing and laying earth connection from earth electrode with 6 SWG dia G.l. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.l. thimble excavation and re-filling as required. |
| 10 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required |
| 11 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of Insulation: 8, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 12 | Supplying installation, Testing and Commissioning of Window type Air conditioners complete with copper power cable upto 3 Mtr, wireless Remote. suitable for working between 180-260V with low & high voltage cutoff and 50 hz, 1 phase AC supply capable of performing, cooling, dehumidification, air circulation, R-32/R-410A/R-407B Green Refrigerant with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P & labour etc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-1 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 °C. The system shall be able to operate up to 50 °C (out door ambient temperature) Supplying Installation, Testing and Commissioning of Window type Air conditioners complete with copper power cable upto 3 Mtr, wireless Remote, suitable for working between 180-260V with low & high voltage cutoff and 50 hz, 1 phase AC supply capable of performing. cooling, dehumidification, air circulation, R-32/R-410A/R-407B Green Refrigerant with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB), antifreeze thermostat on the coil as a safety feature, complete with fixing including T&P & labour etc as required complete in all respect as specified of following capacity. Sound level of up to 50dB inside the room is acceptable. The unit shall be in confirmation with IS 1391 Part-1 2023 and CPWD Specification. The system shall be able to deliver 100% of the rated capacity upto 42 °C. The system shall be able to operate up to 50 °C (out door ambient temperature) 1.5 TR with Inverter 5 Star BEE rating |
| 13 | SITC of 30W LED Flood Light luminaire fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as read with IP 66 protection (a) Total system wattage 30 watt +/-5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class-IP-66 |
| 14 | Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required. |
| 15 | Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required. Upto 450 mm sweep |
| 16 | Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per 15: 10322 with Idriver (Replaceable) as per the requirement with Driver efficiency >85% operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD 10%, P. F.20.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitary), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 3000°K/4000K/5700K/6000K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name ngraved/Embossing/Screen printing on housing, complete in all respect i/c mark certificate (T.C Manufactures Word Mark/Name Engraved/ Embossing/ Screen printing on housing, complete in all respect i/c connections with 1.5 sq mim FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast/Extruded aluminium Body (Thickness a 1.20 mm)18-22 Watt |
| 17 | SITC of LED tube type luminary 10 watt rating complete with poly carbonate housing batten integrated electronics driver pre-wired with high efficient LEDs with following a) Total system wattage 10 watt +/-5% Im b) Efficiency lumens/watt >=95, c) Power factor >=,95 |
| 18 | SITC of single phase monoblock pump set complete with all accessories workable on 240/415V,50HZ ac supply(a) 1HP(0.75KW)single phase pump set head from 12-30 meter suction and delivery 25*25mm |
| 19 | SITC of wall mounted fan 400mm sweep rated voltage 220-230 AC rated frequency 50HZ speed 1280-1350 RPM with desired color |
| 20 | Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand)at all level |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources 4 graded stone aggregate 20 mm nominal size derived from natural sources |
| 22 | Supply of illuminated signage Board made of 3 mm thick ACP sheet on MS Pipe frame of 1\\" ACP Sheet CNC cut as per requirement & Bakelite with 3 mm acrylic from back covered with GI Sheet, Led module suitable led with 2 year warranty & suitable adopter with 1 year warranty Size of Board (15.5 x5)'' |
| 23 | Supply of C Channel 40x75x40 required for fixing of illuminated signage board etc complete as regd. |
| 24 | Supply, instalianon, testing and commissioning of 50mmx50mmx5mm angle von mounting stand for ACP sign board and painting with primer and finished paint as required |
| 25 | Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to 15-7098 of following size -306 sqmm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender