Tender For Provision Of Lighting Arrangement And Other Allied Work In Ward No. 204 Under Shahdara South Zone.
Tender Value
4.76 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
3 days left
EMD
10000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Lighting Arrangement And Other Allied Work In Ward No. 204 Under Shahdara South Zone.
BOQ
| Sl. No. | Item Description |
| 1 | Laying of one number PVC Insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm |
| 2 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 2 x 2.5 sq. mm |
| 3 | Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm |
| 4 | Supply and fixing of 32mm dia x 1 meter long G.1. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV/HPSV Street Light fitting on pole including bending the pipe to the required shape, 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as reqd. |
| 5 | Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 VoltAC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, AC, freq 50/60 hz, Operating temp range-15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, THD < 10% as per IEC 61000-3-2, P. F.20.95, IP-efficiency >85%, THD < 10% as per IEC 61000-3-2, P. F.20.95, IP-66, IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000*K/5700K/6000K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 2120 <135 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).45 Watt |
| 6 | SITC of 30W LED Flood Light luminaire fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as read with IP 66 protection (a) Total system wattage 30 watt +/-5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class-IP-66 |
| 7 | Supply of 250 mm (10 inch) sweep 1250 rpm exhaust fan Fresh Air Type complete with shutter blades etc. as required. |
| 8 | SITC of single phase monoblock pump set complete with all accessories workable on 240/415V,50HZ ac supply(a) 1HP(0.75KW)single phase pump set head from 12-30 meter suction and delivery 25*25mm |
| 9 | SITC of wall mounted fan 400mm sweep rated voltage 220-230 AC rated frequency 50HZ speed 1280-1350 RPM with desired color |
| 10 | Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand)at all level |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources 4 graded stone aggregate 20 mm nominal size derived from natural sources |
| 12 | Supply of illuminated signage Board made of 3 mm thick ACP sheet on MS Pipe frame of 1\\" ACP Sheet CNC cut as per requirement & Bakelite with 3 mm acrylic from back covered with GI Sheet, Led module suitable led with 2 year warranty & suitable adopter with 1 year warranty Size of Board (15.5 x5)'' |
| 13 | Supply of C Channel 40x75x40 required for fixing of illuminated signage board etc complete as regd. |
| 14 | Supply, instalianon, testing and commissioning of 50mmx50mmx5mm angle von mounting stand for ACP sign board and painting with primer and finished paint as required |
| 15 | Earthing with GI earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/coke and salt) as required |
| 16 | Providing and laying earth connection from earth electrode with 6 SWG dia GI wire inn 15 dia GI pipe from earth Electrode includingg connection with GI thimble excavation and re-filling as required |
| 17 | Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to 15-7098 of following size -3*6 sqmm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender