Tender For Annual Operation, Maintenance And Providing Civil And Electrical Maintenance (Including Facility Management Services) For Office And Residential Complexes At Bina Project For 02 Years.
Tender Value
20.30 Crore
Estimated cost
Bid Submission
20 Jul 2026
18 days left
EMD
25.38 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Singrauli → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Operation, Maintenance And Providing Civil And Electrical Maintenance (Including Facility Management Services) For Office And Residential Complexes At Bina Project For 02 Years.
BOQ
| Sl. No. | Item Description |
| 1 | Part A Operation of water supply |
| 2 | Operation of valves, pumps and supply of water in colony area as per institution of engineer incharge ( 15nos semi skilled labour engaged in one day) |
| 3 | Part B Repair and maintenance of water supply in Colony |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 5 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore |
| 6 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :Above 40 mm nominal bore |
| 7 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 8 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Up to 150 mm diameter |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 10 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 11 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia |
| 13 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 40 mm dia |
| 14 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 15 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 16 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 17 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
| 18 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia Pipes |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal outer dia Pipes |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore |
| 24 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore |
| 26 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore |
| 27 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia nominal bore |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore |
| 29 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 30 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 31 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore |
| 32 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 33 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore |
| 34 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore |
| 36 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 37 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore |
| 38 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 39 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 40 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :20 mm nominal bore |
| 41 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :25 mm nominal bore |
| 42 | Providing and fixing uplasticised PVC connection pipe with brass unions : :45 cm length 15 mm nominal bore |
| 43 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 44 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 150 mm diameter pipe |
| 45 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 200 mm diameter pipe |
| 46 | Supplying pig lead at site of work. |
| 47 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I |
| 48 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class I |
| 49 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore |
| 50 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :20 mm nominal bore |
| 51 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 53 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 54 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 55 | Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 56 | Providing and fixing PTMT pillar cock of approved quality and colour . 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 57 | Providing and fixing Solid plastic seat for European pan etc, all complete. |
| 58 | Providing and fixing Pedestal |
| 59 | Providing and fixing bolts including nuts and washers complete. |
| 60 | Providing and fixing C.P angle valve |
| 61 | Providing and fixing G.I. elbows of approved quality all complete as per instruction of EIC. 15 mm dia nominal bore |
| 62 | Providing and fixing G.I. elbows of approved quality all complete as per instruction of EIC.20 mm dia nominal bore |
| 63 | Providing and fixing G.I. elbows of approved quality all complete as per instruction of EIC. 25 mm dia nominal bore |
| 64 | Providing and fixing G.I. elbows of approved quality all complete as per instruction of EIC. 40 mm dia nominal bore |
| 65 | Providing and fixing G.I. elbows of approved quality all complete as per instruction of EIC.50 mm dia nominal bore |
| 66 | Providing and placing GI Sockets (reducing) 20 mm to 15 mm |
| 67 | Providing and placing GI Sockets (reducing)40 mm to any smaller size |
| 68 | Providing and fixing G.I. Tees (equal) 15 mm dia |
| 69 | Providing and fixing G.I. Tees (equal) 20 mm dia |
| 70 | Providing and fixing G.I. Tees (equal)40 mm dia |
| 71 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 72 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 73 | Small petty water supply related works |
| 74 | Part C Tank Cleaning |
| 75 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaningon the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 76 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 77 | Providing and fixing pvc water tank cover in tanks provided in the building including screws, PVC kundi etc. all complete as per instruction of EIC. |
| 78 | Part D Chlorination plant |
| 79 | Supply of liquid Chlorine ( Hypo Chlorine base formulation) for treatment of water for drinking purpose confirming to IS 11673-1992 Gr.-1 and 10500-1991 for two years. |
| 80 | Operation and maintenance of chlorination plant including carrying of chemical at sites three nos. ( Reservior 20' well, Reservior Civil msint. , Reservior Barwani Pump House) as per instruction of EIC. |
| 81 | Supply, installation , testing and commissioning of fully automatic online chlorination plant provided with micro processor programme logic controller with water flow sensor and proportional dosing controler with proper cross connections with pipeline inclusives of cost of maintenance for two years etc all complete |
| 82 | Part E Horticulture |
| 83 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play grounds / Public parks (as per yard stick 1Mali =2.00Acre). |
| 84 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel & other T & P material/ articles shall be provided by the department.) Permanent office accommodation.(1Mali for 1.25Acre) |
| 85 | Edging with bricks laid dry length wise, including required excavation, refilling, consolidatingwith hand packing and spreading surplus earth neatly within a lead of 50 m : Common burnt clay F.P.S (non modular) bricks of Class designation 7.5 |
| 86 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. |
| 87 | Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials shall be provided by the department) as per direction of officer in charge (For Earthen pot 750 Nos) |
| 88 | Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required (Materials shall be provided by the department) as per direction of officer in charge (For of Cement pots 300 Nos) |
| 89 | Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. |
| 90 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. |
| 91 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). |
| 92 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Calendula |
| 93 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Carnation |
| 94 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Chrysanthemum double |
| 95 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Dahlia double |
| 96 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Dianthuys hybrid |
| 97 | Providing and Displaying Phoenix roebelenii palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in-charge. |
| 98 | Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi, as per direction of the officer-in-charge. |
| 99 | Providing and Displaying of Araucaria cookie having ht. 90 cm to 120 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of earthen pot/plastic pot |
| 100 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge. |
| 101 | Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-incharge. |
| 102 | Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. |
| 103 | Providing and Displaying Chrysanthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot and as per direction of the officer-in-charge. |
| 104 | Providing and Displaying Chrysanthemum single variety in different colour well developed having 45 to 60 cm ht., minimum 100 and above half bloom flowers open well stacked with bamboo stick having three layer tiding by thread fresh and healthy foliage in 25 cm Earthen Pot and as per direction of the officer-in-charge. |
| 105 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Marigold Hybrid dwarf |
| 106 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Pansy hybrid |
| 107 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Petunia hybrid |
| 108 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Salvia |
| 109 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Salvia Hybrid different colour |
| 110 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge.Gazania hybrid |
| 111 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Gerbera hybrid double |
| 112 | Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Balsum seedling |
| 113 | Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Cosmos Hybrid |
| 114 | Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Sunflower Dwarf |
| 115 | Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Zinnia hybrid |
| 116 | Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each per tray having 100 Nos. plants as per direction of the officer in charge. Kochia |
| 117 | Supplying and stacking of plant mussaenda (erythrophylia) of height 60-75 cm. Multi branched in earthern pots of size 25 cm as per direction of the officer-in-charge |
| 118 | Providing and displaying plants Budded rose (H.T. Variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm . Earthen pot as per direction of the officer-in-charge |
| 119 | Providing and displaying of Seaforthia Palm having ht. 1.20 m. to 1.50 m. with 8-10 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 120 | Providing and displaying of Croton Golden plant, having ht.45 cm to 60 cm with 2 to 3 branches, well developed, fresh and healthy foliage in 25 cm size of Earthen pot/Plastic pot as per direction of the officer-in-charge. |
| 121 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge |
| 122 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Shrubs Plant |
| 123 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Trees Plant |
| 124 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Hedge Plant /Ground cover |
| 125 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). |
| 126 | Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment). |
| 127 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 128 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 129 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. |
| 130 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 131 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 |
| 132 | Supply of earthen pot 12 \\" |
| 133 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. |
| 134 | Part F - Pest Control |
| 135 | Anti adult measure: General disinfection/Pest control with new generation odurless, colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mosquitos, house flies, etc. using Residual spary of Deltarmethrin 2.5% SC Flow (K.Othrine or approved equivalent), insecticides should be sprayed uniformly over the surfaces of walls, ceiling etc. Frequency- Once in 3 Months. |
| 136 | Thermal fogging using insecticide Deltarmethrin 1.25% ULV (Kingfog or approved equivalent) mixed with Diesel in the ratio of 1:199, for outdoor operatioon of colony, etc. Frequency- Monthly. |
| 137 | Anti larva measures :- Treatment by using Diflubenzuron 25% WP (Bi- larv or approved equivalent) solution to be spread as per instructions of EIC. Frequency – weekly. |
| 138 | Anti adult measure: General disinfection/Pest control with new generation odurless, colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mosquitos, house flies, etc. using Residual spary of Cyfluthrin 5% EW (Solfac EW 050 or approved equivalent) insecticides should be sprayed uniformly over the surfaces of walls, ceiling, etc. Frequency- Once in 3 Months. |
| 139 | Part G- Sanitation colony |
| 140 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 141 | Carriage of materials by mechanical transport including loading, unloading and stacking etc earth lead upto 1.00 Km. |
| 142 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. |
| 143 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 144 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared . |
| 145 | Carriage of materials by mechanical transport including loading, unloading and stacking etc lime, moorum, building rubbish etc. lead upto 1.00 Km. |
| 146 | Cleaning of surface drain and disposal of muck/sludge through trolly or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools and tackles as per instruction of EIC. Upto 300 mm wide. |
| 147 | Cleaning of surface drain and disposal of muck/sludge through trolly or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools and tackles as per instruction of EIC. above 300 mm Upto 600 mm wide. |
| 148 | Cleaning of surface drain and disposal of muck/sludge through trolly or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools and tackles as per instruction of EIC. above 600 mm wide. |
| 149 | Disposal of dead animals including transporation to the specified place, making earth pit disposal of dead animals into pit with adequate quantity of salt, lime, bleaching powder etc. and refilling the pit with earth all complete with tools tackles and consumable as per instruction of EIC Big animal (Cow buffalo, ox and the like) |
| 150 | Disposal of dead animals including transporation to the specified place, making earth pit disposal of dead animals into pit with adequate quantity of salt, lime, bleaching powder etc. and refilling the pit with earth all complete with tools tackles and consumable as per instruction of EIC Small animal (Dog, Cat, Fox, pig, birds and the like) |
| 151 | Brooming and cleaning of all roads in colony and within the premises of the service building and other places as required with all tools and tackles and stacking the garbage at specified place as per instruction of EIC. |
| 152 | Removing and uprooting of unwanted Vegetation grown over the drainage pipes, walls, chhajjas, balcony and similar locaton of building upto floor Vth level with all tools & plants required with safety precautions and making good the same with plaster including disposal of material / tree roots etc. at the required place all complete as per instruction of EIC. |
| 153 | Collection of garbage from door to door and disposal of the same through trolly or other suitable arrangement to the specified place within lead of 1 KM including of sweeping of stair case (for 1st and 2nd floor quarters with all tools and tackles as per instruction of EIC. Ground Floor |
| 154 | Collection of garbage from door to door and disposal of the same through trolly or other suitable arrangement to the specified place within lead of 1 KM including of sweeping of stair case (for 1st and 2nd floor quarters with all tools and tackles as per instruction of EIC. First Floor (172 Unit x 305 days x 2 years = 104920.00) |
| 155 | Collection of garbage from door to door and disposal of the same through trolly or other suitable arrangement to the specified place within lead of 1 KM including of sweeping of stair case (for 1st and 2nd floor quarters with all tools and tackles as per instruction of EIC. Second Floor (46 Unit x 305 days x 2 years = .00) |
| 156 | Cleaning of toilet(Floor area upto 10 sqm ) including cleraning of dado, skirting, WC pan (indian type/western type), wash basin,urinals, glass shelves, mirror and other fittings, if any for D-type or equivalent quarter, any other wash basin outside the toilet by hand dusting and clening with soap solution, acids, deodrants, Phenyl etc. to make the toilet clean and hygenic all complete as per instruction with all tools and tackles and consumable (15 Units x 03 toilets 52 weeks x 02 years = 4680.00 Nos. ) |
| 157 | Cleaning of toilet(Floor area upto 8 sqm ) including cleraning of dado, skirting, WC pan (indian type/western type), wash basin,urinals, glass shelves, mirror and other fittings, if any for C-type or equivalent quarter, any other wash basin outside the toilet by hand dusting and clening with soap solution, acids, deodrants, Phenyl etc. to make the toilet clean and hygenic all complete as per instruction with all tools and tackles and consumable (78 Units x 02 toilets 52 weeks x 1x 02 years = 16224 Nos. ) |
| 158 | Cleaning of toilet including WC pan, wash basin other fittings, if any for \\"B\\" & lower type quarter by hand dusting and clening with soap solution, acids, deodrants, Phenyl etc. to make the toilet clean and hygenic all complete as per instruction with all tools and tackles (406 Units x 01 toilets 52 weeks x 02 years = 42224 Nos. ) |
| 159 | Cleaning , mopping & washing of floor of public buildings other places neatly with detergent / bleaching powder etc. all complete with tools, tackles and consumable to make the floor clean & hygienic as per instruction of E.I.C.Floor |
| 160 | Cleaning of toilets attached with hostel rooms, office chambers etc. including floors, skirting and dado, W.C. Pan (Indian/European type), wash basin, Shelves, mirror and other fittings, if any, by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc, to make the toilet clean and hygiene and providing naphthalene ballsa in urinals complete with all tools, tackles and consumables as per instruction of EIC (for community and service building) |
| 161 | Cleaning of general / common toilet including cleaning of WC Pan (Indian/European type) wash basins,urinals by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc, to make the toilet clean & hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC. |
| 162 | Cleaning of toilet (floor area upto 10 sqm.) including cleaning of dado, skirting, WC Pan (indian type western type), wash basins, urinal glass shelves, mirror and other fittings, etc. all complete. |
| 163 | Cleaning of all types of roof including removal of dry leaves, weedings and cleaning dram holes, brooming etc. all complete with tools & tackles and stacking the garbage at specified places as per instruction of EIC. |
| 164 | Cleaning of doors shutters , windows shutters including chowkhats , window grills , glass panes , cobwebs etc. of service community buildings with necessary detergents , chemicals etc complete as per instruction of EIC |
| 165 | Cleaning of Toilets including WC Pan, wash basins, other fittings, if any for \\"B type & lower type quarter by hand dusting and cleaning with soap solution acids & phenyl etc. to make the toilet clean and hygienic all complete with all tools, tackles as per instruction of EIC. (1248 Units x 01 toilets 52 weeks x 1x 02 years = 16224 Nos. ) |
| 166 | Cleaning of choked sewer & sludge line of all diameters including removal of earth opening joints, cleaning of pipe line, making joints leak proof etc. all complete including disposal of sludge materials outside the colony with all leads at Specified place with tools & tackels as per instruction of EIC |
| 167 | Part H - Repair and maintenance |
| 168 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 169 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 170 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) |
| 171 | Brick work with non modular fly ash lime brick (FALG bricks) confirming to IS:12894,class 7.5 average compressive strength etc. complete in all respect in foundation & plinth : in cement mortar 1:6 (1 cement: 6 sand) |
| 172 | Brick work with non modular fly ash lime brick (FALG bricks) confirming to IS:12894,class 7.5 average compressive strength etc. complete in all respect in above plinth level in Superstructure upto floor V : in cement mortar 1:6 (1 cement: 6 sand) |
| 173 | Half Brick work with non modular fly ash lime brick (FALG bricks) confirming to IS:12894,class 7.5 average compressive strength etc. complete in all respect in foundation & plinth : in cement mortar 1:4 (1 cement: 4 sand) |
| 174 | Half Brick work with non modular fly ash lime brick (FALG bricks) confirming to IS:12894,class 7.5 average compressive strength etc. complete in all respect in superstructure : in cement mortar 1:4 (1 cement: 4 sand) |
| 175 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 176 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 177 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). |
| 178 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Cold twisted bars |
| 179 | Grading roof for water proofing treatment withCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 180 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:1:6 (1cement : 6 coarse sand) |
| 181 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 182 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 183 | Providing and fixing soil, waste and vent pipes :100 mm diaSand cast iron S&S pipe as per IS: 1729 |
| 184 | Providing and fixing plain bend of required degree.100 mm diaSand cast iron S&S as per IS - 1729 |
| 185 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diaSand cast iron S&S as per IS - 1729 |
| 186 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 187 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend |
| 188 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe |
| 189 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm |
| 190 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand Cast Iron S&S as per IS: 1729 |
| 191 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 192 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 193 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 194 | Providing and fixing white vitreous china water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm |
| 195 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 196 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm |
| 197 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 198 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. |
| 199 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 200 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm |
| 201 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).18 mm thick |
| 202 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm |
| 203 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm |
| 204 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10 mm |
| 205 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm |
| 206 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm |
| 207 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 208 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. |
| 209 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 210 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm |
| 211 | White washing with lime to give an even shade :Old work (one or more coats) |
| 212 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 213 | Distempering with 1st quality acrylic distember (Ready mix) having VOC contentless than 50 grams/ litre of approved brand and manufacture to give an even shade: Old work (one or more coats) |
| 214 | Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 215 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 216 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer DEDUCT OF Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 217 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 218 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 219 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 220 | Lettering with black Japan paint of approved brand and manufacture |
| 221 | French spirit polishing :One or more coats on old work |
| 222 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 223 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 224 | Renewing glass panes and refixing existing wooden fillets:Float glass panes of thickness 4 mm |
| 225 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet |
| 226 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 227 | White washing with lime to give an even shade : Old work (two or more coats) |
| 228 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 229 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.(item no. 14.46) |
| 230 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 231 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters With ISI marked stainless steel butt hinges of required size Kiln seasoned and chemically treated hollock wood. Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters |
| 232 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe |
| 233 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 234 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 235 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Deduct for not providing hinges in doors, windows or clerestory window shutters with Stainless steel butt hinges with stainless steel screws For 2nd class teak wood and other class of wood shutters |
| 236 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness |
| 237 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 238 | Neat cement punning. |
| 239 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 240 | Colour washing such as green, blue or buff to give an even shade :New work (two or more coats) with a base coat of whiting |
| 241 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 242 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece |
| 243 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 244 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 245 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thickbase of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 246 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 247 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Shelves (Cast in situ) |
| 248 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm) |
| 249 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm |
| 250 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil |
| 251 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm |
| 252 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm |
| 253 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm |
| 254 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm |
| 255 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 256 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 257 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 258 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.+ |
| 259 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 260 | Providing and fixing to existing door frames. 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 261 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 262 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. |
| 263 | Providing and fixing plain bend of required degree.75 mm diaSand cast iron S&S as per IS -1729 |
| 264 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge 30 mm thick shutters |
| 265 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Second class teak wood |
| 266 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 267 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 268 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type) |
| 269 | Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately): For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 270 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness |
| 271 | Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge |
| 272 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm andunder, including cutting the patch in proper shape, raking out joints and preparingplastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of EngineerIn-Charge. |
| 273 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm |
| 274 | Small petty carpentary work such as small repair of doors,window,making hole,fixing of miscellaneous fixtures etc. |
| 275 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement |
| 276 | Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of FM On-site Operations and reporting to engineer-incharge or his representative. (30 days) |
| 277 | Asst. Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. (30 days), (3 nos. per day) |
| 278 | Part I- Hospital Sanitation |
| 279 | Day to day cleaning of hospital building round the clock by deploying 25 Nos. of workers in General and all the three shifts i.e. First shift (6.00 AM to 2.00 PM), Second shift (2.00 PM to 10.00 PM), and Third shift (10.00 PM to 6.00 AM). The scope of work includes manual/mechanized cleaning which Shall include wet and dry cleaning of Floor, dado, wall tiles, furniture, cleaning of toilets including fixtures and fittings like wash basin including counter, sink, mirror, urinals, towel rail, WC/European pan etc. cleaning of doors, windows, window glass pan, racks, Apparatus, Bed frames, Bedside table, Dustbin, Faucet handle, Door, display boards, cleaning be pan etc. Double wages recovery will be made for less deployment of manpower as stated in scope of work. |
| 280 | Disposal of accumulated garbage hospital waste (excluding Bio-medical Waste) from various location of Hospital complex minimum two trips per day by deploying a Tractor Taylor with diver, diesel, POL and sufficient manpower etc. for loading and unloading of garbage to disposal point as per instruction of Engineer-in-charge (with all lead & lifts). |
| 281 | Supplying and application of the following toiletries like, Vim, Phenyl, Naphthalene balls, sanifresh, toilet liquid soap toilet soap, Mosquito repellent etc as per instruction of EIC,. |
| 282 | Porcelain cleaning power (Vim or Equivalent |
| 283 | Liquid disinfectant (White Phenyl) Dr. Brand or Equivalent ISI Marked |
| 284 | Liquid toilet cleaner (500 ml Bottle) (Harpic or Equivalent) |
| 285 | Nephthalene balls. (ISI Marked) |
| 286 | Liquid Soap. (Dettol or Equivalent) |
| 287 | Toilet Soap 125 gram. (Lifebuoys or Equivalent) |
| 288 | Odonil (50 Gram) |
| 289 | Bleaching Powder |
| 290 | Detergent Powder |
| 291 | Room Freshener 115 ml |
| 292 | Colin (500 ml Bottle) |
| 293 | Providing and fixing hand shower of jaquar make of quivalent (ALD-565) |
| 294 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore |
| 295 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 296 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing andmaking curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessaryaccessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixingaccessories such as nuts, bolts, fasteners etc.). |
| 297 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking ofserviceable material and disposal of unserviceable material. |
| 298 | Beyond 30 cm girth upto and including 60 cm girth |
| 299 | Beyond 60 cm girth upto and including 120 cm girth |
| 300 | Beyond 120 cm girth upto and including 240 cm girth |
| 301 | Above 240 cm girth |
| 302 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including paintingof fittings and brackets, cutting and making goodthe walls wherever required : 610x460 mm bowl depth 200 mm |
| 303 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 304 | Providing soap dispenser with glass Bottle of jaquar make or equivalent (AKP-35735P) |
| 305 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe |
| 306 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm |
| 307 | Operation of Piyau by engaging sufficient manpower on daily basis for 2 nos Piyau as per Instruction of Engineer In Charge. |
| 308 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 309 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm |
| 310 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be easured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 311 | Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry but excluding the cost of nosing of steps etc complete. 25 mm thick with 12.5 mm nominal sizestone aggregate |
| 312 | ELECTRICAL PART |
| 313 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 314 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire) |
| 315 | Wiring for circuit/ sub main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required(2 X 6 sq. mm + 1 X 6 sq. mm earth wire) |
| 316 | Supplying and fixing 5A to 32 As rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Single Pole) |
| 317 | Supplying and fixing 5A to 32 As rating, 240/415 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Double Pole) |
| 318 | Wiring for circuit/submain wiring along with earth wire with the 2X10 sq.mm +1X6 sq.mm earth wire of FRLS PVC insulated copper conductor single core cable In surface/recessed medium class PVC conduit as required. |
| 319 | Supplying and fixing of 5/6 amps piano type switch on the existing switch box/cover including connections etc. as required. |
| 320 | Supplying and fixing 3 pin 5/6 amps piano type socket on the existing switch box/cover including connections etc. as required. |
| 321 | Supplying and fixing bell push piano type switch/socket on the existing switch box/cover including connections etc. as required. |
| 322 | Supplying and fixing of 15/16 amps piano type switch on the existing switch box/cover including connections etc. as required. |
| 323 | Supplying and fixing 6 pin 15/16 amps piano type socket on the existing switch box/cover including connections etc. as required. |
| 324 | Supplying and fixing PVC batten/angle holder including connections etc. as required. |
| 325 | Supplying and fixing 3 pin, 5 amp ceiling rose on the exisiting junction box/wooden block connection etc. as required. |
| 326 | Supplying and fixing of 2.5μf capacitor (SAP Material code - 4600016871) |
| 327 | Supplying and fixing 63A , double pole,(single phase and neutral) 240 V,residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 328 | Supplying and fixing 63A , four pole,(three phase and neutral) 415 V,residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 329 | Supplying and fixing 6 way Double door, single pole and neutral, sheet steel, MCB distribution board,240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/isolator) |
| 330 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required |
| 331 | Installation,Testing and commissioning of Led Tube Light Fittings directly on ceiling/wall complete with all accessories including connections[Material to be supplied by department] sap code:4600016619 |
| 332 | supply and fixing of 3 pin electric plug (top) 15 A |
| 333 | Supplying and fixing of 4X4 PVC plain board |
| 334 | Supplying and fixing of 7X4 PVC plain board |
| 335 | Supplying and fixing of 8X6 PVC plain board |
| 336 | Supplying and fixing of 8X10 PVC plain board |
| 337 | Supply of 3mm thick phenolic laminated sheet |
| 338 | supply of Iron scews, 35mm X 6mm |
| 339 | supply of Iron scews, 40mm X 6mm |
| 340 | supply of Iron scews, 45mm X 6mm |
| 341 | supply of PVC fastener 40mm long |
| 342 | supply of PVC clip for fixing cable |
| 343 | supply of 32mm X 8mm bolts & nuts |
| 344 | supply of 38mm X 10mm bolts & nuts |
| 345 | Supplying and fixing PVC casing and capping (double fold) 20mm x 12mm ISImarked along with accessories on surface etc. as required |
| 346 | Supplying and fixing PVC casing and capping (double fold) 32mm x 12mm ISImarked along with accessories on surface etc. as required |
| 347 | Supplying and fixing of analog time switch for automatic ON-OFF street light of approved make in existing LT panel including connections etc. as required as per specification |
| 348 | Rewinding of AC Ceiling Fans with rewinding materials including connecting wires |
| 349 | Maintenance of Power Supply and Distribution System of the Township including Maintenance of OH Line,Power Transformers,Feeder Pillars and Bus Bars,Household Wiring and electrical circuit related works,Service Line Connection etc as required on day to day basis[Minimum Manpower to be engaged 6 electricians(Skilled),6 electrical helpers(6 semi skilled and 2 unskilled)] |
| 350 | Repairing/Rewinding of 03 Nos 22KW/30HP and 1 no. 37 kw/ 50 HP 3phase induction motor as & when required for colony water supply for 02 years at Bina project |
| 351 | Super enamel copper wire 20swg |
| 352 | Nomex Paper for insulation |
| 353 | Insulating varnish Dr. beck |
| 354 | Terminal Cover |
| 355 | Bearing housing repairing |
| 356 | Bearing |
| 357 | Soldering materials with connecting lead and lugs |
| 358 | Glass Tape |
| 359 | Labour charges for all work including testing of motor |
| 360 | Less cost of old scrap wire |
| 361 | Estimate for AC repairing and maintenace for period of 2 years at Bina project. |
| 362 | Dismantling & shifting of window air conditioning unit 1.0TR/ 1.5TR/2TR capacity excluding fascia and cutting, welding complete work as required within town. |
| 363 | Dismantling &shifting, installation, testing &commissioning of split air conditioning unit1.0TR/1.5TR/2TRcapacity including indoor /outdoor unit complete as required within town. |
| 364 | Supply, installation, testing & commissioning ofsuction/discharge copper pipe line in split airconditioning unit 1.0/1.5 TR/2 TR/3 TR capacityincluding brazing, nitrile rubber insulation 6/9mmthick class 'O', etc complete as required copper tube 1/4\\" |
| 365 | Supply, installation, testing & commissioning ofsuction/discharge copper pipe line in split airconditioning unit 1.0/1.5 TR/2 TR/3 TR capacityincluding brazing, nitrile rubber insulation 6/9mmthick class 'O', etc complete as required copper tube 1/2\\" |
| 366 | Supply, installation, testing & commissioning ofsuction/discharge copper pipe line in split airconditioning unit 1.0/1.5 TR/2 TR/3 TR capacityincluding brazing, nitrile rubber insulation 6/9mmthick class 'O', etc complete as required copper tube 3/8\\" |
| 367 | Supply, installation, testing & commissioning ofsuction/discharge copper pipe line in split airconditioning unit 1.0/1.5 TR/2 TR/3 TR capacityincluding brazing, nitrile rubber insulation 6/9mmthick class 'O', etc complete as required copper tube 5/8\\" |
| 368 | Gas charging (R410A/Eco Friendly Green Gas) ofwindow/split air conditioning unit including flushingof cooling & condensing units with nitrogen gas &rectification of leakage, replacement of filter, flairnut etc. if any. 2 ton |
| 369 | Gas charging of refrigerator upto 300 ltr capacityincluding flushing of cooling & condensing unitswith nitrogen gas & rectification of leakage,replacement of filter, etc. if any. |
| 370 | Replacement & connection of thermostat switch ofrequired size & capacity for Refrigerator upto 300 ltrcapacity including all required material to completethe job. |
| 371 | Replacement & connection of starting relay requiredsize & capacity for Refrigerator upto 300 ltr capacityincluding all required material to complete the job. |
| 372 | Comprehensive maintenance and servicing of airconditionersof following type and capacity includingreplacement with new compressor, and related partssuch as capacitors, relay, electronic controls, PCB,display, thermostat, remote control, and relatedaccessories, rewinding of fan/blower motor, flushingof cooling & condensing units with nitrogen gas,required refrigerant gas charging & rectification ofleakage, replacement of filter, flair nut etc. if any. (split type 2 tonn) |
| 373 | Repairing/servicing for 200 Nos. air conditioners, 15 Nos water coolers and 07 Nos. refrigerators and attending running break downs and maintenance at site (with a team of one skilled technician & 1 helper per day) |
| 374 | Estimate for Repair/Maintenance of HT/LT Overhead Line of Township area for 02 years at Bina project |
| 375 | Nuts and Bolts with washers 16 mm X 125 mm |
| 376 | Prima coat over new steel and other metallicsurface with red oxide zinc chromide paintcomplete with supply of material labour etc.including preparation of surface.( 300 Nos of 11 mtr-4.53 sqm area each &100 HT poles of size 13m long-5.30 sqm area each.[total area=300X4.53+100X5.30=1889]) |
| 377 | Supply and fixing as per specification caution/danger board ofapproved make with necessary material complete Small size 200 X 150 mm for MV/LT |
| 378 | Prima coat with aluminium paint, brushingcomplete with material and labour includingpreparation of surface 300 Nos of 11 mtr-4.53 sqm area each &100 HT poles of size 13m long-5.30 sqm area each.[total area=300X4.53+100X5.30=1889] |
| 379 | Dismantling of existing steel pole, R.S. Joist,girder with bracket clamp insulator or stay from the cement concrete foundation and making the site clear by refilling the pit to ground level i/c transportation to required destination within township. |
| 380 | Dismantling of existing overhead ACSR,AAAC, GI, conductor and making the site cleari/c transportation to required destination withintownship. |
| 381 | Erection of RS Joist pole/'H' beam/steel tubular/steelrail pole strut in cement concrete 1:3:6(1cement:3coarse sand: 6 aggregate 40mm nominalsize) foundation including excavation and refilling andsecured with holding clamp, nuts and bolts, etc. asrequired. |
| 382 | Supplying and erection of stay set complete(galvanized) with 19/20mm dia x1.8 metre long stay rod,anchor plate of size 45mm x 45mm x 7.5mm,thimble, stay clamp,bow tightner,7/3.15mm dia G.I. stay wire and strain insulator etc. in cement concrete (1 cement: 3 coarse and: 6 grinded stone aggregate 40mm nominal size) foundation including excavationand refilling etc. as required. |
| 383 | Labour charges for erection of angle/channel/flat ironfitting for overhead line & sub-station etc such as 'D'bracket, cross arms, top clamp, 'V' cross arms,back/support clamp or other similar work etc. including fabrication work including nut bolts of required size, as required as perspecification . |
| 384 | Checking and re-jumpering work of service connection cables (from overhead line to buildings) and main cables (from substation to overhead line) as required. The scope also includes cleaning and re-jumpering of street light fittings of any type and make by connecting the cable leads of fittings to the overhead line conducto |
| 385 | Erection of all aluminium conductor(10 km)(wt. of 148 sqmm aaa conductor per km =406.9 kg; for 10 km ,4069 kg |
| 386 | Erection of GI earth wire |
| 387 | Supplying and erection of 50mm x 65mm shackleinsulator with G.I. bolts, nuts and straps etc. asrequired. |
| 388 | Supplying and erection of 11KV porcelain pininsulator complete with long steel head G.I. pin, nut,washer etc. as required |
| 389 | Supplying and erection of 11KV porcelain discinsulator for 11KV overhead lines with galvanizedinsulator fittings, ball and socket type, and completewith galvanized strain clamp, bolts, nuts washer etc. asrequired |
| 390 | Supplying and drawing guard wire/earth wire/bearerwire 13 sq mm (4mm. dia) G.I. including stringing,binding at existing insulators or brackets, jointing,jumpering, connecting & cradle etc. as required andclearing of obstacles (if any) |
| 391 | Laying of one number 3 core H.Tarmoured/unarmoured power cable 11KVgrade of size not exceeding 300 sq. mmon wall/pole etc. as required. |
| 392 | Earthing with GI pipe 4.5 mtr long,40mm dia including accesories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt etc |
| 393 | Supplying and Laying 6 SWG GI Wire at 0.5 mtr below ground level for conductor earth electrode including connection/termination with GI Thimble etc as required. |
| 394 | Tree Trimming falling under HT/LT lines including uprooting of ranks , vegetation , grass , bushes, wood saplings & tree etc. not exceeding 30 cm girth and removing 5 mtrs., outside the periphery of the area cleaned (in sqm) 1KM X 2 mtrs. ( 1mtr on both side under HT line X 2 times per year) , 16KM X 2 mtrs. ( 1 mtr on both sides under LT line X 2 times per year) ( 4000 sqm + 64000 sqm = 68000 sqm)[ 34 km in one year and 68 km in 2 years] |
| 395 | Upkeep and maintenance including cleaning,tightening of bolts,greasing,foot valve cleaning/checking,replacement of damaged bearing,alignment of pump-motor,welding/cutting related works if any etc with a group of 4 nos. labours (2skilled + 2unskilled) as per instruction of Engineer Incharge.Tools, Tackles & consumables like gland packing etc as per instruction of EIC @ 4% |
| 396 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 days