Tender For Welcome Maintenance Including Certain B/R & E/M Repair In Offrs Jcos/Or Md Accn & Otm Accn At Misa C Under Ge (S) Tezpur
Tender Value
26 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
14 days left
EMD
52000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tezpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Including Certain B/R & E/M Repair In Offrs Jcos/Or Md Accn & Otm Accn At Misa C Under Ge (S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | Material and labour for rendering 15 mm thick on faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surface in CM (1:4) as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L 15mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth with WPC @ 3% by the weight of cement. complete all as specified and directed. (WPC Will be measured and paid seperately). |
| 5 | Supply only integral water proofing compound or equalent complete all as specified and directed. |
| 6 | Material and labour for preparing new plastered surface of ceiling and applying a three coat of white wash complete all as specified and directed. |
| 7 | Material and labour for preparing old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 8 | Material and labour for complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on walls complete all as specified and directed. |
| 9 | Material and labour for complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on ceiling complete all as specified and directed. |
| 10 | Material and labour for providing and applying plaster of paris putty of 2 mm thickness over the newly plastered/old painted wall/ceiling to prepare the surface even and smooth complete all as specified and directed. |
| 11 | Material and labour for Prep of new surface & applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over one coat of priming coat with using auto roller for making the surface uniform complete all as specified and directed. |
| 12 | Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with using auto roller for making the surface uniform complete all as specified and directed. |
| 13 | Material and labour for applying one coats of oil emulsion distemper on old plastered surface of walls including preparation with using auto roller for making the surface uniform complete all as specifed and directed. |
| 14 | Material and labour for preparation of old painted wooden surfaces of girth or width exc 10 Cms and applying one coat of synthetic enamel paint complete all as specifed and directed. |
| 15 | Material and labour for preparation of old painted steel surfaces of girth or width.exc 10 Cms and applying one coat of synthetic enamel paint complete all as specifed and directed. |
| 16 | M & L for applying one coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed. |
| 17 | M & L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of requiredshade: New work one coat applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed |
| 18 | Supplying and fixing in repair floor door stopper 140mm (overall length of cover plate) of aluminum alloy body and tongue, anodized, with hard drawn steel spring fixed in floor including taking down the old one complete all as specified and directed. |
| 19 | Supplying and fixing in repairs 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 20 | Supplying and fixing in repairs 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 21 | Supplying and fixing in repairs 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 22 | Supplying and fixing in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 23 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty or fixed with beads at any height upto 04 storey ht of bldg incl necessary scaffolding .complete all as specified and as directed |
| 24 | Supplying and fixing of 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm including glazing pins/clips each pane at any height upto 04 storey ht of bldg incl necessary scaffolding complete all as specified and as directed. |
| 25 | Supplying and fixing of 4mm thick Figured glass, pin head type and glazing withoil putty in squares n exc 0.5 sq. m in each pane including glazing pins/clips at any height upto 04 storey ht of bldg incl necessary scaffolding each pane complete all as specified and as directed. |
| 26 | Supplying and fixing in repairs 15mm bore brass chromium plated fancy type bib cock with wall flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 27 | Supplying and fixing in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads,chromium plated,fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifed and directed. |
| 28 | Supplying and fixing in repairs for 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 29 | Supplying and fixing in repair for PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specified and directed. |
| 30 | Supplying and fixing in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 31 | Supplying and fixing in repairs CP towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 32 | S&F Tubular towel rail of brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 33 | Supplying and fixing in repairs 125mm dia CP grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed. |
| 34 | Supply and fix as in repair, PVC cabinet looking mirror with inner shelves for holding bath/saving kit of size 300x450mm complete all as specified and directed |
| 35 | S&F in repair PVC water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 36 | S & F in repair 15mm Angle Stop valves cast copper alloy,fancy type with chromium plated for iron pipe or for unions and fixed . complete all as specified and directed. |
| 37 | S&F in repair Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 38 | S & F in repair CP Soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 39 | Taking up or down water pipe tubing and connections, including cleaning for re-fixing or removal to store Outer diameter of pipes : 20 mm complete all as specified and directed. |
| 40 | Taking up or down water pipe tubing and connections, including cleaning for re-fixing or removal to store Outer diameter of pipes :25 mm complete all as specified and directed. |
| 41 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20 cm girth complete all as specified and directed. |
| 42 | Supplying and laying 20mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts,diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, complete all as specified. |
| 43 | Supplying and laying 25mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts,diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, complete all as specified. |
| 44 | Supplying and fixing of 15 mm dia Brass CP, wall mixer 3 in 1 system with provision for both hand and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without Hand and overhead shower) (Concealed type) screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 45 | Supplying and fixing of Hand Shower 105mm dia round shape multiflow with cascade effect (ABS body chromium plated with grey face plate) with rubit cleaning system including 1.5 metre long easy flex tube in chrome finish with nuts complete all as specified and as directed. |
| 46 | S & F rotational moulded polyethylene water storage tank of Colour- White/Green/Blue (Cylindrical vertical with close top), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, with tank lid having locking arrangement hoisted and fixed in position including dismantling existing water storage tanks (RCC/PVC) .complete all as specified and directed. |
| 47 | S&F as in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed. |
| 48 | S&F in repair Swivel shower brass chromium plated 125mm size for fixing with 15 mm pipe. complete all as specified and directed. |
| 49 | S&F in repair vitreous china wah basin pedestal pattern white, flat back size 550 x 400 mm, with 32mm dia Brass Chromium Plated Waste Fitting, excluding taps, waste chain, plug and porcelain stopper but including erecting stand complete all as specified and directed. |
| 50 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. & including flush pipe, plastic water closet seat cover, white closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge. |
| 51 | S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 52 | S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed. |
| 53 | Supplying and fixing as in repair of 15mm bore brass chromium plated fancy type two way bib cock with wall flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 54 | Supplying and fixing Hand Shower (Health Faucet) with 58mm dia 1 metre long flexible tube with wall hook complete all as specified and as directed. |
| 55 | Supplying and fixing chromium plated toilet paper holder with cover complete all as specified and directed. |
| 56 | S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. |
| 57 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exe 1.5 Sqm each complete all as specified and directed.. |
| 58 | Taking down and refixing in same opening door shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 59 | Taking down & Refixing old PVC door shutters with frame of any description exe 1.0 sqm but n. exc. 2 Sqm each in same opening including old hardware, complete all as specified & directed by Engr-in-charge. |
| 60 | Supplying and fixing of factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the M.S frame welded/sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 61 | Supplying and fixing of solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 62 | S&F as in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter |
| 63 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 64 | Supplying and fixing of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 65 | Supplying and fixing of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 66 | Supplying and fixing of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 67 | Supplying and fixing of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 68 | Supplying and fixing of 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 69 | Supplying and fixing of 75mm hasp and staple mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 70 | Supplying and fixing in repair floor door stopper 140mm (overall length of cover plate) of aluminum alloy body and tongue, anodized, with hard drawn steel spring fixed in floor including taking down the old one complete all as specified and directed. |
| 71 | S&F Aluminium powder coated door seal strip with glass woolve fixed with steel screws at bottom rail of external door complete all as specified directed by Engr-in-charge. |
| 72 | S & F in Repair Mortice lock of brass of four levers ,vertical type, size 100 mm, complete all as specified and as directed |
| 73 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 74 | Material and labour for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 75 | Material and labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado/skirting complete all as specified and directed. |
| 76 | Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 77 | Material and labour for double charged vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile exe. 0.18 Sqm and not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 78 | Material and labour for glazed ceramic tiles in vertical surface 450X 300X 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match to match the surface of tile complete all as specified and directed. |
| 79 | Supplying and fixing of 16-18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling the old one complete all as specified and directed. |
| 80 | Material and labour for rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situations complete all as specified and directed. |
| 81 | Dismantling wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters complete all as specified and directed. |
| 82 | S&F and repair Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 3mm dia single GI adjustable suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress complete all as specified and directed. |
| 83 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 84 | M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 85 | S&F in repairs 20 mm dia decorative curtain rods of MS conduit with polymer linning etc. with decorative side dome and brackets complete all as specified and directed. |
| 86 | Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc.complete all as specified and as directed by Engineer-in-Charge. |
| 87 | M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including PVC box or modular GI/PVC boxes of suitable sizes including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. |
| 88 | All as per item No. 86 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 89 | All as per item No. 86 here-in-before but one 3 pin 5 amps switch socket commbination on the independent board with other switch complete all as specified and directed by Engineer-in-charge. |
| 90 | M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC box or modular GI/PVC boxes of suitable sizes for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed.Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. |
| 91 | M&L fo Point wiring surface type with 4.0 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 4.0 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including s PVC box or modular GI/PVC boxes of suitable sizes for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed.Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. Please Enable Macros to View BoQ information |
| 92 | M&L fo Point wiring surface type with 4.0 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 4.0 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including s PVC box or modular GI/PVC boxes of suitable sizes for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed.Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender