Tender For Repairs/Replacement Of Certain Misc Repairs At Md Accn At Misa C Under Ge (S) Tezpur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
3 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tezpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs/Replacement Of Certain Misc Repairs At Md Accn At Misa C Under Ge (S) Tezpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Jul-2026 |
| 2 | 27-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exe 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down door shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description not exe 1.0 sqm each complete all as specified and directed |
| 5 | Taking down and refixing in same opening door shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 6 | taking down & Refixing old PVC door shutters with frame of any description exe 1.0 sqm but n. exc. 2 Sqm each in same opening including old hardware, complete all as specified & directed by Engr-in-charge. |
| 7 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 8 | Supplying and fixing for factory made 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 9 | Supplying and fixing of 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed. |
| 10 | S&F factory made pressed steel frame for doors with double rebates of size 125 x 60mm including necessary fixing lugs, hinges lock strike plate (Thickness the sheet is 1.25 mm)(cost of hinges included) complete all as specified & directed by Engr-in-charge. |
| 11 | S&F factory made pressed steel frame for doors with single rebates of size 105 x 60mm including necessary fixing lugs, hinges lock strike plate (Thickness the sheet is 1.25 mm)(cost of hinges included) complete all as specified & directed by Engr-in-charge. |
| 12 | M&L for providing cement concrete type C1 (1:3:6) 20mm graded aggregate as in pressed steel door frame (backfill) complete all as specified & directed by Engr-in-charge. |
| 13 | Material and labour for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 14 | Supplying and fixing of factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the M.S frame welded/sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed |
| 15 | Supplying and fixing of solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 16 | S&F Factory made box type powder coated Steel window composite type with double pressed steel frames 80 mm x 60mm (Peripherral) and 80x75mm (Intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/vertilators shutter with sash bar of MS tubular section of size 50mm x 20mm x 1-1mm thick fixed with box type hinges including 10mm x 10mm x 1.10mm MS hollow tubular section as beading for glazed and wire shutter handle of 100mm size made out of Z section 01 No, MS stove enamelled black towar bolt of size 120mm 02 Nos, 150 mm mild steel hooks and eyes,each sutter flat iron 40mm x 1.25mm and 200mm long hold fasts 04 Nos each window including necessary filling hollow frame with PCC (1:3:6) complete all as specified & directed by Engr-in-charge. |
| 17 | M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 18 | Material and labour for powder coated anodised aluminium sections for for doors, windows, ventilators frames with one or more rebates including joining cleat for fixing and powder coated (minimum thickness of powder coating 50 micron)etc. complete all as specified and directed |
| 19 | Material and labour for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots ,necessary fittings and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 20 | Material and labour for 5.50 mm thick sheet glass, ordinary quality and glazing fixed in aluminium frames in square/rectangle not exc 0.5 sq. m in each pane complete all as specified and directed |
| 21 | Material and labour for 5.50 mm thick sheet glass, ordinary quality and glazing fixed in aluminium frames in square/rectangle exc 0.5 sq. m in each pane complete all as specified and directed |
| 22 | Material and labour for 18 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,and around covered with 6mm thick teak wood beading/lipping fixed to timber frame work complete all as specified and directed. |
| 23 | Supplying and fixing in repair 25 mm thick seasoned & defect free 2nd class hardwood boarding planed both side fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases,toilet boxes, racks, pelmets and similar work complete all as specified and directed. |
| 24 | S&F as in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. |
| 25 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 26 | Supplying and fixing of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 27 | Supplying and fixing of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 28 | Supplying and fixing of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 29 | Supplying and fixing of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 30 | Supplying and fixing of 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 31 | Supplying and fixing of 75mm hasp and staple mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 32 | Supplying and fixing of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed. |
| 33 | Supplying and fixing in repair floor door stopper 140mm (overall length of cover plate) of aluminum alloy body and tongue, anodized, with hard drawn steel spring fixed in floor including taking down the old one complete all as specified and as directed. |
| 34 | S&F Aluminium powder coated door seal strip with glass woolve fixed with steel screws at bottom rail of external door complete all as specified directed by Engr-in-charge. |
| 35 | Supplying and fixing in repairs aluminum (extruded section) door closer hydraulically regulated designation No-1 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 36 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. |
| 37 | Supplying and fixing of flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed. |
| 38 | M&L Preparing new Wood and Wood Based Surfaces of any description, nexc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Primer, complete all as specified and as directed. |
| 39 | Hacking out old broken glass (any thickness) from wooden/steel frames, glazed with putty of fixed with screws complete all as specified & directed by Engr-in-charge. |
| 40 | S&F sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane, thickness in 4 mm complete all as specified & directed by Engr-in-charge. |
| 41 | S&F Glass Sheet 4 mm thick Figured glass, pinhead type, glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 43 | Material and labour for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 44 | Material and labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado/skirting complete all as specified and directed. |
| 45 | Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 46 | Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 47 | Material and labour for double charged vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile exe. 0.18 Sqm and not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 48 | Material and labour for double charged vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile exe. 0.18 Sqm and not exc. 0.36 Sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 49 | Material and labour for glazed ceramic tiles in vertical surface 450X 300X 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match to match the surface of tile complete all as specified and directed. |
| 50 | Supplying and fixing of 16-18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling the old one complete all as specified and directed. |
| 51 | Material and labour for machine cut pre-polished kota stone slab, 20-25 mm thick (single slab) laid in step/floors with neat cement slurry @ 3.00 kg/square metre over 20 mm thick screed bed of cement mortar (1:6), including pointing in grey cement slurry to match the shade of slab and cutting groves in stone and making nosing at edge, removing unserviceable tiles and rubbish off the premises, etc., complete all as specified and directed. |
| 52 | Material and labour for machine cut pre-polished kota stone slab, 20-25 mm thick (single slab) in riser of steps, skirting, dado and pillar laid over 10 mm thick cement screed in CM 1:4 with neat cement slurry @ 3.00 kg/square metre including pointing in grey cement slurry to match the shade of slab, removing unserviceable tiles and rubbish off the premises, etc., complete all as specified and directed. |
| 53 | Material and labour for rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situations complete all as specified and directed. |
| 54 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc , complete all as specified and as directed by the Engineer –In - Charge. |
| 55 | M&L for Brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, complete all as specified and as directed by the Engineer –In - Charge. |
| 56 | M&L for Brick work with sub class ‘B’ bricks (Except Bricks), straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified and as directed by the Engineer –In - Charge. |
| 57 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 58 | Material and labour for rendering 10 mm thick on faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surface in CM (1:3) as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 60 | Material and labour for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 61 | Supply only liquid water proofing compound complete all as specified and directed. |
| 62 | Material and labour Preparing new plastered surface. and applying two coats Oil Bound distemper over one coat of primer complete all as specified and directed. |
| 63 | Material and labour Preparing new plastered surface of ceiling and applying a three coat of white wash complete all as specified and directed. |
| 64 | Material and labour for preparing newly plastered wall surfaces and applying two coats of 100% premium acrylic emulsion paint over required shade applied @ 1.43 litre/10 Sqm of prepared surface, alkali & fungal resistant, having VOC less than 50 gm/litrepaint over and including apriming coat of exterior primer applied @ 0.90 litre/10 Sqm over new plastered surface complete all as specified and directed. |
| 65 | Dismantling plain or corrugated steel sheeting/galvalume sheet any guage, thickness including Nainital or similar pattern roof covering,complete all as specified and directed |
| 66 | Supplying and fixing of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 67 | Supplying and fixing of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws complete all as specified and directed. |
| 68 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 69 | Supplying and fixing of Rolled mild steel Fe 410 -W (Gde-E- 250) quality-A ) in roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed |
| 70 | Material and labour for preparation of steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed |
| 71 | Demolition of cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chhajjas and similar suspended work including removing rubbish off the premises complete all as specified and directed. |
| 72 | Material and labour for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished fair and even including taking down old plastered surface complete all as specified and directed |
| 73 | Supplying and and applying 2 coats of High performance elastomeric cementetious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire sunken floor slab & beam all around of toilets/bath ass per following methodolgy:- Cleaning of exposed concrete surface by mechanical means to remove laitaince, loose particles, etc. Coving of RCC junction using cement concrete (1:1.5:3) mixed with wpc. Applying 1 coat of waterproofing mambrane to concrete surface followed by application of 45 GSM glass fibre re-inforcementon the wet membraned surface. Applying 2nd coat of waterproof membrane at right angles to the direction of first coat. Second coat shall be applied after the first coat is dry. Sprinkle fine aggreagte immediatly after application of 2nd coat to get the mechanical keys for protective plaster. Curing to water proofing membrane to be carried out for minimum 2 days with ponding complete. The waterproofing product should have mixed density 1.68 gm/CuC (brushable consistency) . RCC floor slab area shall be measured for payment purpose. complete all as specified and as directed. |
| 74 | Material and labour for cement concrete type E2, 1:5:10 (40mm graded aggregate) as in mass concrete in sunken floors complete all as specified and directed. |
| 75 | Material and labour for providing 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring, and the like finished fair and even without using extra cement complete all as specified and directed. |
| 76 | Taking up or down water pipes tubing 20 mm outer dia including all fittings heads shoes bends swan necks etc. including cleaning and refixing or removal to store (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 77 | Taking up or down water pipes tubing 25 mm outer dia including all fittings heads shoes bends swan necks etc. including cleaning and refixing or removal to store (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 78 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20 cm girth complete all as specified and directed. |
| 79 | Supplying and laying of CPVC pipes outer dia 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts,diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, complete all as specified and directed |
| 80 | Supplying and laying of CPVC pipes outer dia 25/32 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts,diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, complete all as specified and directed |
| 81 | Supplying and fixing of rimless single piece water closet WC, white, china ware wash down water closet pan with and including vitreous china flushigng cistern, plastic water closet seat white closed pattern with flat bottom and cover including fixing the same as per manufacturer instruction, jointing the water pipe etc by makeing hole in stone masonry wall and making good disturbed portion etc complete all as specified and directed. |
| 82 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. & including flush pipe, plastic water closet seat cover, white closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge. |
| 83 | Supplying and fixing in repairs vitreous china squatting pan, orissa pattern size 580 X440 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including provison of lime concrete complete all as specified and directed. |
| 84 | Supplying and fixing in repairs PVC valveless, syphonic action type, wall hung 10 litres flushing cistern, low level, white with inlet ball valve foat and handle including brackets complete all as specified and directed. |
| 85 | Supplying and fixing in repairs 15mm bore brass chromium plated fancy type bib cock with wall flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 86 | Supplying and fixing in repair for sink with draining board made of stainless steel 1mm thick kitchen including bedding in cement mortar to dwarf wall or including fixing cantilever brackets, overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 87 | S&F Stainless steel plate rack (utensil rack) of size ( 750mm x 600 mm) and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed by Engr-in-charge. |
| 88 | Supplying and fixing in repair PTMT 32/40mm dia waste coupling (half or full threaded), minimum weight 60 gms) fixed to stainless steel sinks complete all as specified and directed. |
| 89 | S&F in repair vitreous china wah basin pedestal pattern white, flat back size 550 x 400 mm, with 32mm dia Brass Chromium Plated Waste Fitting, excluding taps, waste chain, plug and porcelain stopper but including erecting stand complete all as specified and directed. |
| 90 | Supplying and fixing for 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 91 | Supplying and fixing for PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specified and directed. |
| 92 | Supplying and fixing in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads,chromium plated fancy type,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 93 | Supplying and fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 94 | Supplying and fixing in repair CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 95 | Supplying and fixing in repair 125mm dia PTMT grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed. |
| 96 | Supplying and fixing in repair 15 mm dia Fancy type Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 97 | Supplying and fixing in repairs 15mm bore stop valve cast copper alloy chromium plated, fancy type screwed down high pressure long shank and cup concealed type with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 98 | S & F in repair rotational moulded polyethylene water storage tank of Colour- White/Green/Blue (Cylindrical vertical with close top), HDPE, triple layered with ISI marked of 500 ltrs capacity with inlet & outlet connections, with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre complete all as specified and directed |
| 99 | Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed |
| 100 | S&F in repairs Rotational moulded polyethylene water storage tanks lid except black colour with clips, screws locking device complete for 500 ltrs tanks capacity, complete all as specified and directed by Engr-in-charge. |
| 101 | S&F PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB complete all as specified and directed |
| 102 | S&F Tubular towel rail of brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 103 | M & L for Swivel shower brass chromium plated 125mm size for fixing with 15 mm pipe.complete all as specified and directed |
| 104 | S&F 100 mm bore cast iron ‘P’ or ‘S’ trap including jointing to soil waste pipe in cement concrete 1:2:4 type B-1 complete all as specified and directed |
| 105 | Supplying and fixing in repair 110 mm dia PVC (SWR) pipes single socketd, in any length with rubber ring joints fixed to wall with stack clamp complete all as specified and directed. |
| 106 | Supplying and fixing in repair of 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 107 | Supplying and fixing in repairs of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 108 | Supplying and fixing in repair of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 109 | Supplying and fixing in repair of 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 110 | Supplying and fixing in repairs of 75 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 111 | Supplying and fixing in repair of 110 mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 112 | Supplying and fixing in repairs PVC (SWR)75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 113 | M&L for disconnecting of PVC tank of capacity 500 Ltrs & upto 1000 Ltrs for cleaning all as specified and directed :-a) Dewatering & removing all settled silt, scale & dust from inside of tanks using coconut brush manually and applying bleaching powder and allowed to rest for 1 hour.b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins.c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tankd) Refixing the tank in same position or raised/lower height after cleaning or water proofing treatment (as may necessary) complete all as directed by engr-in-charge.Note : - Water proofing treatment, PCC bench, any fittings if required to be replaced shall be measured and paid separately under relevant items. |
| 114 | Grubbing up tree trunk upto root girth exc. 5 cm & not exc. 30 cm including cutting of trunk portion protuding over wall surface/roof surface/terrace of building height up to 10.0 mtr. The rate also Include necessary scaffolding and necessary safety measure if required and making good the surface in cement mortar (1:3) and applying one coat of anti growth of vegetation chemical as per manufacturer's instruction and removal of unserviceable material and cleaning site complete all as specified and directed by Engr-in-Charge. |
| 115 | Removal of bushes, grass including roots, earth, mud and debris over roof top of building material from roof top surface and cleaning the effected surface neatly and disposal of rubbish out of the premises/ MD land including cleaning of spouts/ rain water pipe ( at two/three storey building).complete all as specified and directedNote: Surface area of roof slab for the affected area shall be measured |
| 116 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 01, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender