Tender For Providing Of High Mast Lights Of Certain Locations At Afac Coimbatore
Tender Value
18.58 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
18 days left
EMD
37200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of High Mast Lights Of Certain Locations At Afac Coimbatore
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out in hard/dense soil for laying of UG cables or for errection of pole complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM thick complete all as specified and directed. |
| 4 | Removing excavated materials (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 5 | Material & Labour for Hardcore of gauge 12.5mm chips, deposited, spread and levelled in layers not exceeding 15cm thick, watered, compacted and rammed to a true surface complete all as specified and directed. |
| 6 | Earthwork excvation in trenches with (hard/dense soil) not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or shefts , wells , cess pits, manholes etc not exceeding 10sqm on plan and not exceeding 1.5m in depth and getting out all complete all as specified and directed. |
| 7 | Material & Labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 8 | Material & Labour for PCC block masonry Type C1 1:3:6 (20mm stone aggregate) setting in CM 1:4 with solid blocks exc 10cm in width and setting in cement mortor, complete all as specified and directed. |
| 9 | Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) for making good the disturbed surface of road/path/hard standing/ foundation of pole by using cement contrete mortar 1:2:4 type B1, using 40 mm graded stone aggregate 0.45 mtr wide and 0.15 mtr thick complete all as specified and directed. including demolition of old PCC and removing the debris from site complete all as specified and as directed . |
| 10 | Material & Labour for Machine pressed precast concrete rubber moulded interlocking paver block (With Grey cement and colour pigment) any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed |
| 11 | Material & Labour for 100mm thick Plain Cement Concrete Type C2 ,1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed. |
| 12 | Material and labour 10 mm thick cement plaster in CM 1:6 for wall finished even & smooth without using extra cement complete all as specified and directed. |
| 13 | Removing soil/ building materials/ debris etc. to a distance of 15km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination away from the defence land complete all as specified and directed. |
| 14 | Earth cushining to UG cables using excavated soil riddled by using large sieve to separte the composite particles/roots etc and refilling in trenches all as specified and directed |
| 15 | Supply and lay precast cable cover class LV type -1 flat size 250 mm x 150 mm x40 mm for cable protection complete all as specified and as directed. |
| 16 | Supply, layig, connecting, testing and commissioning of 16 Sqmm 4 Core under ground LT cable XLPE insulated screened, PVC bedded, armoured heavy duty electric cable confirming to IS : 7098-1985 with stranded aluminium conductor 1100 volts laid in trenches, floor, fixed to walls/drawn through pipe, duct or along the pole and incl the disturbence surface of road making good with using PCC, fixing the cable with suitable size glands, crimping type lugs etc all as specified and directed. |
| 17 | Material & Labour for earthing complete with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth lead 25x4 mm by means of bolts, nuts, check nuts/bracing and washers all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20 mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40 mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, with flush type handle with 16mm dia round bars and 40 mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion. Note :- (i) GI earth strip upto 7.5m shall be included in the quated rate (ii) PCC chamber shall be provided 50cm away from the plinth of building. (iii) for returing filling of earth pits if additional soil is reqd the same has to be provided by contractor without any extra cost |
| 18 | Supply and laying GI pipe light grade 50 mm bore including all typ e of fitting such as bends, elbows, tee etc fixed on walls/to poles/laid in trenches as cable protection all as specified and as directed. |
| 19 | Material & Labour for dismantling / cutting of existing road / path / hard standing cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) suitable for laying cable protection pipe 80 / 50 mm dia under the road / path / hard standing complete all as specified and as directed. |
| 20 | Supply only Energy saving and environmental friendly long life ecxclusive innnovative die-cast aluminium IP66 flood light 200W LED with driver unit complete all as directed. |
| 21 | Supply only Energy saving and environmental friendly long life ecxclusive innnovative die-cast aluminium IP66 flood light 200W LED with driver unit complete all as directed. |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 days