Tender For Welcome Maintenance And Other B/R Work At Md Officers Accn Under Age B/R-I Of Ge (I) Kanpur Cantt
Tender Value
47 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
18 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance And Other B/R Work At Md Officers Accn Under Age B/R-I Of Ge (I) Kanpur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : WELCOME MAINT AND OTHER B/R WORK AT MD OFFICERS ACCN UNDER AGE B/R-I OF GE (I) KANPUR CANTT Contract No : GE(I)/KAN/T-22 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed. |
| 3 | M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed. |
| 4 | All as per item No. 2 above but except bricks complete all as specified and directed. |
| 5 | Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | Dismantling of unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 8 | M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed. |
| 9 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed. |
| 10 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed. |
| 11 | S&F wind ties for roof including securing bolts as directed, including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 12 | Demolition of unreinforcement cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed. |
| 13 | M&L for PCC type B0 (1:2:4 using 12.5mm graded stone aggregate) as in roof kerb, benching/ padding over roof surface including chamfered on eges etc complete all as specified and directed. |
| 14 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copings, filling for fixing of hold fast etc including necessary formwork etc complete all as specified and directed. |
| 15 | Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 16 | M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished fair and even (upto two storey of building) complete all as specified and directed. |
| 18 | M&L for 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces of walls, finished fair and even (upto two storey of building) complete all as specified. |
| 19 | M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, surfaces finished fair and even (upto two storey of building) complete all as specified and directed. Note:- WPC will be measured and paid separately. |
| 20 | M&L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall finished fair and even complete all as specified and directed. |
| 21 | Supply only integral water proofing compound ISI Marked complete all as specified and directed. |
| 22 | M&L for preparation of new plastered surfaces and applying three coats of white wash as on ceiling surfaces complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed. |
| 25 | M&L for preparation of old plastered surfaces and applying one coats of oil bound distemper on surfaces of wall complete all as specified and directed. |
| 26 | All as per Item No 24 above but on surface of ceiling complete all as specified and directed. |
| 27 | M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed. |
| 28 | All as per Item No 26 above but on surface of ceiling complete all as specified and directed. |
| 29 | M&L for preparation of old plastered surfaces and applying one coat of cement based paint of approved shade on plastered surfaces or unplastered surface of wall including brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified and directed. |
| 30 | M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 31 | All as per Item No 29 above but two coat of synthetic enamel paint complete all as specified and directed. |
| 32 | M&L for preparation of old steel surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 33 | Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed. |
| 34 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.(Note : Debris obtained from dismantling will be dispossed off as directed) |
| 35 | M&L 25mm thick PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in floor to receive tiles complete all as specified and directed. |
| 36 | M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 37 | All as per Item No 35 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 38 | M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 39 | All as per Item No 37 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 40 | M&L for vitrified coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, polished as in floors laid over and including 15mm thick screed or screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed. |
| 41 | All as per Item No 39 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 42 | M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed. |
| 43 | Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar complete all as specified and directed.(Note : Debris obtained from demolition will be dispossed off as directed) |
| 44 | Material and labour for 16 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed. |
| 45 | M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed. |
| 46 | M&L for Chequered tiles of size 300x300x20 mm thick over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 47 | M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 48 | M&L 75 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protection finished even and smooth wihtout using extra cement complete all as specified and directed. |
| 49 | Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height including fittings/grids etc complete all as specified and directed. |
| 50 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and directed. |
| 51 | S&F false ceiling 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600mm module, cut cross tees longer than 600mm require independent support 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200mm cross tees. The 1200mm cross tees to have central \\"birdsmouth\\" notches to facilitate fitting of 600mm cross tees. Perimeter trim to be wall angles, secured to walls at 450mm maximum centres. Hangers made of galvanised steel of size 26x26x25x1.2mm with a galvanised thickness of 80 grm/Sqm. A pre straightened hanger wire of dia 2.68mm of 1.83m length , thickness of 80grm/Sqm and a tensile strength of 344 - 413 MPa, alongwith adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68mm with a minimum pull strength of 110 Kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner complete all as specified and directed. |
| 52 | M&L for providing 8mm thick ceiling tiles of size 595 x 595 mm , fixed or laid/ inserted to timber/GI/Aluminium frame work as in ceiling, with / without screws, having RH-95%, light reflectance 0.82 - 0.85 complete all as specified and directed. |
| 53 | M&L for providing 8mm thick ceiling tiles of size 595 x 595 mm , fixed or laid/ inserted to timber/GI/Aluminium frame work as in ceiling, with / without screws, having RH-95%, light reflectance 0.82 - 0.85 complete including taking down ceiling boards complete all as specified and directed. |
| 54 | Taking down chowkhat without taking off shutter from chowkats area n.exc 1.5 Sqm each complete all as specified and directed. |
| 55 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed. |
| 56 | Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 57 | Taking down shutters of any description exceeding 1 Sqm but n exc 2 Sqm each and re-fixing in the same opening complete all as specified and directed. |
| 58 | M&L 2nd class HW as in plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed. |
| 59 | S&F hold fast of flat iron 25 x 3 mm complete all as specified and directed. |
| 60 | S&F 30mm thick glazed and skeleton shutter of 2nd class hard (Hollock) prepared to receive gauge/glass (without sash bars ) fixed with mitred beeds and securing glass gauge etc sizes of members of shutter as specified in SSR part-1 section-8 ,clause 8.24(a) complete all as specified and directed. |
| 61 | S&F 30 mm thick factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 complete all as specified and directed.(Part I), kiln seasoned and chemically pressure treated complete all as specified. |
| 62 | S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.Note : M&L for 4mm plain sheet glass panes shall be deemed to be included in this item. |
| 63 | S&F factory made steel tubular window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded etc complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item. |
| 64 | S&F factory made steel tubular ventilator with side hung shutter including hinges steel peg stay, complete all as specifed as per HQ CELZ Lucknow Drg no LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm & 4mm thick frosted/pin headed glass panes as per requiremet shall be deemed to be included in this item. |
| 65 | S&F 100 x 50mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and directed.Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item. |
| 66 | S&F 125 x 63mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum. Door frame shall be water proof, termite proof, fire retardant and should have excellent stainless screws holding strength to fix hinges and holding door shutter properly complete all as specified and directed.Note :- Rate for fixing of frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed shall be deemed to be included in this item. |
| 67 | S&F 30 mm thick factory made WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges shall be paid separately) |
| 68 | S&F factory made wire gauged solid PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be wire gauzed in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmely.Note: M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm shall be deemed to be included in this item. |
| 69 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 110 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. Comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, including providing stainless steel wire cloth, 4mm thick plain glass panes, necessary hold fast & MS grills for safety purpose be provided complete all as specified and directed by Engineer-in-Charge. Note: 1. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.2. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm plain sheet glass panes, necessary hold fast shall be deemed to be included in this item. 3. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items. |
| 70 | M&L for factory made uPVC white colour ventilator. Horizotal frame member is made of profile of required size 88x12mm and vertical member strips are made of 71 mmx28mm with MS pipe stiffener (19x19x0.8mm thk) vertical frame member with help of required size CSK screw and adhesive. Total unit is fixed with help of bracket/fasteners including 4 mm thick frosted glass, MS grills and SS Jalli as per requirement complete all as specified and directed.1. M&L for 0.36mm nominal dia of stainless steel wire mesh and aperature 1.40mm, 4mm frosted/pin headed sheet glass panes & necessary hold fast shall be deemed to be included in this item. 2. M&L for MS grills shall be provided as directed by Engr-In-Charge and same will be paid separately under relevant items |
| 71 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube incl suitable metal stifner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. |
| 72 | S&F factory made solid panel PVC moulded door shutter 28 to 30 mm thick (styles) with 2, 4 or 6 raised panel design with particle board core complete all as specified and pattern & design complete all as specified and directed. |
| 73 | S&F PVC but hinges 100mm size complete all as specified and directed. |
| 74 | S&F PVC handle 150mm size complete all as specified and directed. |
| 75 | S&F PVC tower bolt 150mm size complete all as specified and directed. |
| 76 | M&L for Easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed. |
| 77 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 78 | M&L for 4mm thick plain sheet glass ordinary quality and fixed with oil putty in square n.exc 0.5 Sqm in each pane of steel windows complete all as specified and directed. |
| 79 | All as per item No 77 above but frosted glass / pin headed glass complete all as specified and directed. |
| 80 | S& F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and directed. |
| 81 | S& F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with tinned tacks or galvanised wire staples and complete all as specified and directed. |
| 82 | M&L for framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, cooler stands etc conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 83 | S&F 100mm size mild steel, butt hinges, medium weight, cold rolled and fixed with mild steel screws as specified. |
| 84 | S&F 100mm size stainless steel, butt hinges, medium weight, and fixed with ss screws complete all as specified and directed. |
| 85 | S&F 150mm long barrel tower bolt of aluminium extruded section complete all as specified and directed. |
| 86 | S&F 150mm long handle of aluminium extruded section fabricated anodized type complete all as specified directed. |
| 87 | S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section & fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 88 | S&F 150mm floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 89 | S&F in repairs 300mm mild steel, ordinary rat -tail rod pattern spring including roller and roller plate complete and all as specified and directed |
| 90 | S&F in repairs fancy type stainless steel curtain rods of 25 mm dia for doors/ windows etc including SS brackets and SS funnels/dome complete all as specified and directed. |
| 91 | M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed. |
| 92 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 93 | Fixing only of old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed. |
| 94 | S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed. |
| 95 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 96 | Fixing only of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed. |
| 97 | S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified and directed. |
| 98 | Dismantling PVC water tanks of capacity exc 250 ltr but n exc 500 ltr and removing to store complete all as specified and directed. |
| 99 | Dismantling PVC water tanks of capacity exc 500 ltr but n exc 1000 ltr and removing to store complete all as specified and directed. |
| 100 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed. |
| 101 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white color (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed. |
| 102 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide & over and including 10cm width or girth complete all as specified and directed. |
| 103 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide n.exc 10cm width or girth complete all as specified and directed. |
| 104 | Cleaning and removing all scale and dirt etc from tank of capacity exc 250 and n.exc 500 liters capacity from circulated pipe without damaging of existing float valves including stampring by stencil of date of cleaning by removing old writing complete all as specified. |
| 105 | S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm dia iron pipe (min wt 210 gram) complete all as specified and directed. |
| 106 | S&F in repairs 20mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 107 | S&F stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495mm x420mm, with bowl size 405mmx 355mm x 178mm with including waste coupling, waste pipe complete all as specified and directed. |
| 108 | S&F in repair sinks with drainage board of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling complete all as specified and directed. |
| 109 | S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel of overall size 750x900mm including fixing with brackets/clamps with screws pattern & design as approved by GE complete all as specified and directed. |
| 110 | S&F in repair vitreous china WHB white flate back size 550x400mm including supplied and fixed angle iron brackets, including CP waste coupling 32mm dia complete all as specified and directed. |
| 111 | S&F 450 mm x 600 mm bevelled edge mirror, mounted on 6 mm thick AC building board or commercial plywood including aluminium framing and fitted to wooden plugs with CP brass screws and cup screws including taking down old unserviceable mirror. |
| 112 | S&F in repair Mirror cabinet size 33x43cm (PTMT Alloy) complete all as specified and directed. |
| 113 | S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern and making connection with & including CI P/S Trap, etc complete all as specified and directed. |
| 114 | S&F in repair for cascade type China ware closet pedastal pattern of superior special colour including fixing bolts, Fushing cistern with twin flush fitting and sheet cover of same quality and colour complete all as specified and directed. |
| 115 | S&F in repair of PVC low level flushing cistern white 10 Ltrs capacity with inlet 15mm bore ball valve, float and handle incl brackets, incl PVC connection 300mm with flanges at both ends screwed down to 15mm bore pipe and 32mm bore PVC flush pipe of required length complete incl taking out of existing flushing cisterns complete all as specified and directed. |
| 116 | S&F in repair stainless steel L-type toilet jet spray with flatted end nozzle including 1.0 mtr SS huge pipe 15mm bore complete all as specified and directed. |
| 117 | S&F in repair toilet paper holder, chromium plated, fixed in repair, complete all as specified and directed. |
| 118 | S&F in repair Towel Rail, chromium plated complete all as specified and directed. |
| 119 | S&F in repair soap dish, chromium plated complete all as specified and directed. |
| 120 | S&F in repair 15mm long body bip taps, cast copper alloy (chromium plated) with crutch handle or butter fly handle screwed down, screwed for iron pipe complete all as specified and directed. |
| 121 | S&F in repair 15mm short body bip taps, cast copper alloy (chromium plated) with crutch handle or butter fly handle screwed down, screwed for iron pipe complete all as specified and directed. |
| 122 | S&F in repair conceeled stop cock 15 mm bore, cast copper alloy ,chromium plated ,screwed down high pressure wit crutch and butter fly handles, screwed both ends with for iron pipes or for union complete all as specified and directed. |
| 123 | S&F in repair 15mm Angle valves cast copper alloy , cast copper alloy ,chromium plated ,screwed down high pressure wit crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified and directed. |
| 124 | S&F in repair 15 mm Pillar taps, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure, with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 125 | S&F in repair 125 mm dia shower rose, brass chromium plated with swivel joint complete all as specified and directed. |
| 126 | S&F in repair SS hand health faucet for water closet ,pedastal pattern complete all as specified and directed. |
| 127 | S&F in repair 15mm dia bore wall mixer with connecting legswll flanges and wall bracket for hand shower complete all as specified and directed. |
| 128 | S&F in repair 15 mm bore central hole basin mixer, chromium plated, without popup waste system with 450mm longbbraided hoses pipe complete all as specified and directed. |
| 129 | S& F in repair CP Sink mixer with swinging casted round shape spout (wall mounted model) with connecting legs & wall flanges complete all as specified and directed. |
| 130 | S&F in repair full glass shelf, chromium plated complete all as specified and directed. |
| 131 | S&F in repair full Corner shelf, chromium plated complete all as specified and directed. |
| 132 | S&F stainless steel gratings with hole suitable for 100 mm floor trap complete all as specified and directed. |
| 133 | S&F stainless steel gratings with hole suitable for 75mm floor trap complete all as specified and directed. |
| 134 | S&F in repair PVC waste pipe 32/40mm dia suitable for Sink/Urinal etc complete all as specified and directed. |
| 135 | S&F in repair PVC connection 450mm long brass chucknut bolt ends for fixing 15mm dia pipe complete all as specified and directed. |
| 136 | Dismantling of boarding, any descripsion, fixed in any position with nails all as specified and directed |
| 137 | S&F of 20 mm thick PVC board made out of 18 mm thick PVC ply and 1 mm thick PVC ply free from rigid one side prelaminated and another side plain colour, PVC sheet stuck on both side with solvent cement adhesive to make the board of 20 mm thick cub board and wardrobe incl hinges, ss handle complete all as specified and directed |
| 138 | M&L for preparation of new wooden surfaces width or girth exc 10 cm and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 139 | Dismantling structural steel work including doors, gates but excluding framedtruss etc complete all as specified and directed. |
| 140 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed. |
| 141 | S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including, steel gates and similar work, cut size, holes punched; including round headed screws, and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded , including bending or turning up, mitred angles, etc. as required complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 days