Tender For Addition/Alteration To Omqs At 17Fbsu, Af Trivandrum
Tender Value
45.64 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
11 days left
EMD
91280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
trivandrum → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Omqs At 17Fbsu, Af Trivandrum
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | BOQ Corrigendum and PS Corrigendum | BOQ | 20-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster any description over wall and ceiling surfaces complete all as specified and directed |
| 2 | Demolition of reinforced cement concrete in floor,landing,slab and similar suspended work not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 3 | Dismantling of floor/ wall tiling including cement mortar bedding (but not backing) removing of unserveable tiles and rubbish of the premises complete all as specified and directed |
| 4 | Demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillars,etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed |
| 5 | M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cm 1:6 all as specified and as directed |
| 6 | M&L for PCC Coping in PCC 1:3:6 type C-1 using 20mm graded aggrgate, chamfered edges etc including necessary formwork all as specified and directed, |
| 7 | M & L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors over 15mm screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 8 | S & F Glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over rendering 10mm thick in CM 1:4 on wall to receive wall tiles complete all as specified and directed. |
| 9 | M&L for Rendering 15 mm thick in CM 1:4 of block/ brick masonry, finished even and smooth without using extra cement complete all as specified and as directed |
| 10 | M/L for granite (of any type) work (table rubbed and polished) in steps ,jambs,pillars,window cills,cooking plat forms 18 to 20mm thick like in cement mortor (1:4) including pointing in white cement (1:2) using marble dust with pigments to match the shade of granite over 15mm screed bed in CM 1:6 including cutting mirror polishing and edge rounded as study table etc complete all as per specified as directed |
| 11 | M&L for preparing old plastered surface and applying one coats of oil bound distemper on walls etc complete all as specified and directed |
| 12 | M&L for preparing new plastered surface and applying two coats of oil bound distemper on walls , complete all as specified and directed |
| 13 | M & L for prepration of old wall surfaces and apply one coat of weather proof coat paint incl one coat of primer etc complete all as specified and directed |
| 14 | M & L for applying two coats or more of 100% premium acylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali &fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/sqm over and including priming coat of exterior primer applied@09 li/sqm over new surface . complete all as specified and directed |
| 15 | M&L for preparing old plastered surface and applying one coats of white wash to ceiling complete all as specified and directed |
| 16 | M&L applying one coat of synthetic enamel paint on old wooden surfaces exceeding 10 cm width or girth and of wdn surface incl preparation etc all as specified and directed. |
| 17 | M&L applying two coat of synthetic enamel paint on old steel surfaces exceeding 10 cm width or girth incl preparation etc complete all as specified and directed. |
| 18 | S&F in replacement steel chromium plated round grating 100mm dia, fixed in position in cement mortar (1:3) complete all as specified and directed |
| 19 | S & F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, in walls, floors and their making good and also cutting, screwing and waste all as specified and directed |
| 20 | S & F in repair 20mm bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings incl taking down the existing pipe complete all as specified and directed |
| 21 | S&F sinks with double bowl with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste copuling, waste flexible down pipe etc; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1370x457 mm bowl size 400mm x 340mm x200 fixed d in repair all as specified and directed. |
| 22 | S&F Waste coupling 32mm size half thread with 80mm height for WHB, sink etc complete all as specified and directed. Make: CERA/Jaquar/Prayag |
| 23 | S&F in repairs Sink mixer with regular swinging spout (wall mounted model) with connecting legs & wall flanges, complete all as specified and directed.Make: Jaquar/CERA/Hindware |
| 24 | S&F in repairs waste pipe of 32mm size full length suitable for basin, sink and urinal, complete all as specified and directed. |
| 25 | M&L applying two coats of synthetic enamel paint on new steel surface exceeding 10cm width or girth incl preperation and over a coat of red oxide primer etc complete all as specified and directed |
| 26 | Supply installation and Handover of steel modular kitchen having dimension 8160mm x 2550mm of height700mm+18mm mulwood finish. Detailed Specification Technical SpecificationSupply installaon and commissioning of modular kitchen consisting of following:Cabinet Material Combination of 0.5mm (Body panels) and 1.2mm thick(Horizontal stiffener & leg channels) Galvanized sheet as per IS277. Unit construction :Floor, Tall and Wall units will be made using sheet metalpanels connected with fastenersMetal Shutters: Powder coated Steel shuers made up with inner and outer panels using 0.6mm thick Galvanized steel corner formed Precoated Steel shutter made with outer precoated panel made of 0.75 Galvanized sheet and powder coated inner panel 0.6mm thick Galvanized steel corner formed. Finish on metal surface Epoxy polyester powder coating with dry film thickness of 50 microns (±10).Wire baskets Stalwart basket Made of 304 grade Stainless steel wires with Ni Cr plating and Hettich double extension slides Hettich kits for wire basket and Quadro slides Serene Undermount soft closing slides with 304 grade Stainless steel wires with Ni Cr plating. Drawer system Tranquil drawer M-type and F-typeShelves 0.5thick Galvanized steel shelves in case of metal hinged door unitHinges Hettich hinges with CED coating for extended corrosion resistance Hettich sensys soft closing hingesLegs Hettich make PVC height adjustable legs. (100mm/ 150mm) Skirtng Rehau make PVC Co-extruded skirtng in metallic silver and black color. (100mm / 150mm)Finishing The modular units to be finished with minimum 18mm thick Mulword of reputed brands like Thomsun , Denwud etc The overall kitchen should consist of below items 1.Boom unit should consist of Plain shelf unit 900 mm 2 nos, Plain shelf unit 600mm 1 nos, plan shelf unit 400 mm 1 nos, corner plain shelf unit 1000mm 1nos, gas cylinder unit 500 mm I nos and 1number of 600mm cooking unit consisng of cutlery tray and wire baskets. 2.Top unit should consist of plain shelf 800mm 2nos, plain shelf unit 400mm 2nos and plain shelf unit of 600 1 nos. Each top unit should have height of 600mm. 3.Necessary Fillers of same colour matching the shuer colours to be used for filling gaps all as specified and directedMake: Godrej/Sleek(Asian Paints)/Jindal Life Style//Heetich |
| 27 | NOTE FOR ITEM NO .26 The overall kitchen should consist of below items and quantity inclusive to complete one job in one QTR POSITION ITEM DIMESION QUANTITYBottom Plain Shelf unit 900x700(WxH)mm 2Bottom Plain Shelf unit 600x700(WxH)mm 1Bottom Plain Shelf unit 400x700(WxH)mm 1Bottom Corner Plain Shelf unit 1000x700(WxH)mm 1Bottom Gas cylinder unit 500x700(WxH)mm 1Bottom Cooking unit 600x700(WxH)mm 1Top Plain Shelf unit 800x600(WxH)mm 2Top Plain Shelf unit 400x600(WxH)mm 2Top Plain Shelf unit 600x600(WxH)mm 2Boom Thomsun make muliwood 18mm 2Note : The details of steel modular kitchen is detailed in the drawing no; WD/01/26-27 to WD/03/26-27(Drawing attached in PS) |
| 28 | Supply installation and Handover of steel modular kitchen having dimension 1895mm x 2940mm of height700mm+18mm mulwood finish. Detailed Specification Technical SpecificationSupply installaon and commissioning of modular kitchen consisting of following:Cabinet Material Combination of 0.5mm (Body panels) and 1.2mm thick(Horizontal stiffener & leg channels) Galvanized sheet as per IS277. Unit construction :Floor, Tall and Wall units will be made using sheet metalpanels connected with fastenersMetal Shutters: Powder coated Steel shuers made up with inner and outer panels using 0.6mm thick Galvanized steel corner formed Precoated Steel shutter made with outer precoated panel made of 0.75 Galvanized sheet and powder coated inner panel 0.6mm thick Galvanized steel corner formed. Finish on metal surface Epoxy polyester powder coating with dry film thickness of 50 microns (±10).Wire baskets Stalwart basket Made of 304 grade Stainless steel wires with Ni Cr plating and Hettich double extension slides Hettich kits for wire basket and Quadro slides Serene Undermount soft closing slides with 304 grade Stainless steel wires with Ni Cr plating. Drawer system Tranquil drawer M-type and F-typeShelves 0.5thick Galvanized steel shelves in case of metal hinged door unitHinges Hettich hinges with CED coating for extended corrosion resistance Hettich sensys soft closing hingesLegs Hettich make PVC height adjustable legs. (100mm/ 150mm) Skirtng Rehau make PVC Co-extruded skirtng in metallic silver and black color. (100mm / 150mm)Finishing The modular units to be finished with minimum 18mm thick Mulword of reputed brands like Thomsun , Denwud etc The overall kitchen should consist of below items 1.Boom unit should consist of Plain shelf unit 900 mm 2 nos, Plain shelf unit 600mm 1 nos, plan shelf unit 400 mm 1 nos, corner plain shelf unit 1000mm 1nos, gas cylinder unit 500 mm I nos and 1number of 600mm cooking unit consisng of cutlery tray and wire baskets. 2.Top unit should consist of plain shelf 800mm 2nos, plain shelf unit 400mm 2nos and plain shelf unit of 600 1 nos. Each top unit should have height of 600mm. 3.Necessary Fillers of same colour matching the shuer colours to be used for filling gaps all as specified and directedMake: Godrej/Sleek(Asian Paints)/Jindal Life Style//Heetich |
| 29 | NOTE FOR ITEM NO .28 The overall kitchen should consist of below items and quantity inclusive to complete one job in one QTR POSITION ITEM DIMESION QUANTITYBottom Plain Shelf unit 600x700(WxH)mm 1Bottom Plain Shelf unit 800x700(WxH)mm 1Bottom Plain Shelf unit 300x700(WxH)mm 1Bottom Corner Plain Shelf unit 1000x700(WxH)mm 1Bottom Gas cylinder unit 600x700(WxH)mm 1Bottom Cooking unit 600x700(WxH)mm 1Top Plain Shelf unit 900x600(WxH)mm 1Top Plain Shelf unit 300x600(WxH)mm 2Top Plain Shelf unit 450x600(WxH)mm 1Boom Thomsun make muliwood 18mm 2Note : The details of steel modular kitchen is detailed in the drawing no; WD/01/26-27 to WD/03/26-27(Drawing attached in PS) |
| 30 | Supply installation and Handover of steel modular kitchen having dimension 3160mm x 2550mm of height700mm+18mm mulwood finish. Detailed Specification Technical SpecificationSupply installaon and commissioning of modular kitchen consisting of following:Cabinet Material Combination of 0.5mm (Body panels) and 1.2mm thick(Horizontal stiffener & leg channels) Galvanized sheet as per IS277. Unit construction :Floor, Tall and Wall units will be made using sheet metalpanels connected with fastenersMetal Shutters: Powder coated Steel shuers made up with inner and outer panels using 0.6mm thick Galvanized steel corner formed Precoated Steel shutter made with outer precoated panel made of 0.75 Galvanized sheet and powder coated inner panel 0.6mm thick Galvanized steel corner formed. Finish on metal surface Epoxy polyester powder coating with dry film thickness of 50 microns (±10).Wire baskets Stalwart basket Made of 304 grade Stainless steel wires with Ni Cr plating and Hettich double extension slides Hettich kits for wire basket and Quadro slides Serene Undermount soft closing slides with 304 grade Stainless steel wires with Ni Cr plating. Drawer system Tranquil drawer M-type and F-typeShelves 0.5thick Galvanized steel shelves in case of metal hinged door unitHinges Hettich hinges with CED coating for extended corrosion resistance Hettich sensys soft closing hingesLegs Hettich make PVC height adjustable legs. (100mm/ 150mm) Skirtng Rehau make PVC Co-extruded skirtng in metallic silver and black color. (100mm / 150mm)Finishing The modular units to be finished with minimum 18mm thick Mulword of reputed brands like Thomsun , Denwud etc The overall kitchen should consist of below items 1.Boom unit should consist of Plain shelf unit 900 mm 2 nos, Plain shelf unit 600mm 1 nos, plan shelf unit 400 mm 1 nos, corner plain shelf unit 1000mm 1nos, gas cylinder unit 500 mm I nos and 1number of 600mm cooking unit consisng of cutlery tray and wire baskets. 2.Top unit should consist of plain shelf 800mm 2nos, plain shelf unit 400mm 2nos and plain shelf unit of 600 1 nos. Each top unit should have height of 600mm. 3.Necessary Fillers of same colour matching the shuer colours to be used for filling gaps all as specified and directedMake: Godrej/Sleek(Asian Paints)/Jindal Life Style//Heetich |
| 31 | NOTE FOR ITEM NO .30 The overall kitchen should consist of below items and quantity inclusive to complete one job in one QTR POSITION ITEM DIMESION QUANTITYBottom Plain Shelf unit 900x700(WxH)mm 2Bottom Plain Shelf unit 600x700(WxH)mm 1Bottom Plain Shelf unit 400x700(WxH)mm 1Bottom Corner Plain Shelf unit 1000x700(WxH)mm 1Bottom Gas cylinder unit 500x700(WxH)mm 1Bottom Cooking unit 600x700(WxH)mm 1Top Plain Shelf unit 800x600(WxH)mm 2Top Plain Shelf unit 400x600(WxH)mm 2Top Plain Shelf unit 600x600(WxH)mm 2Boom Thomsun make muliwood 18mm 2Note : The details of steel modular kitchen is detailed in the drawing no; WD/01/26-27 to WD/03/26-27(Drawing attached in PS) |
| 32 | M&L for point wiring with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn in and including PVC conduit and all conduit accessories concealed and including provision of 1.5 sqmm PVC insulated copper cable FRLSH ISI marked as earth continuity conductor fabricated branded 3 Modular metal flush box concealed in walls with Modular suitable plate with cover with suitable screws for housing switches socket outlets fan regulators etc. for one switch and socket outlet 3 pin 6 Amps on independent board all as specified and as directed for the following: - |
| 33 | S&F in repair for Switch modular type one way 6 Amps , one module all as specified and directed |
| 34 | S&F in repair for Switch modular type two way 6 Amps , one module all as specified and directed |
| 35 | S&F in repair for Bell push modular type 6 Amps , one module all as specified and directed |
| 36 | S&F in repair for Modular socket 2/3 pin multi purpose flush type 2 modular 6 Amps all as specified and directed. |
| 37 | S&F in repair for Switch modular type one way 16 Amps , one module all as specified and directed |
| 38 | S&F in repair for Modular socket flush type multi purpos 6A/16A-6 pin combined 2 module all as specified and directed |
| 39 | Supply & fix in repair modular type fan step regulator 360 Degree rotatable type 120W - 2 Module all as specified and directed.Make for Items 3 to 8 : Legrand Myrius / Philips Sleek / Schneider Electric Opate or its equivalent as per Annexure. |
| 40 | S&F in repair for Ceiling rose 65x50mm surface PVC / Polycarbonate, isolated body with three terminals all as specified and directed. |
| 41 | S&F in repair for AC box modular socket type with MCB SP 25 Amps 10 KA operating on 240 volts AC with plug top all as specified and directed. |
| 42 | Supply and fix in repairs modular white cover plate with frame of 2 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 43 | Supply and fix in repairs modular white cover plate with frame of 3 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 44 | Supply and fix in repairs modular white cover plate with frame of 4 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 45 | Supply and fix in repairs modular white cover plate with frame of 6 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 46 | Supply and fix in repairs modular white cover plate with frame of 8 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 47 | Supply and fix in repairs modular white cover plate with frame of 12 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 48 | Supply and fix in repairs modular metal flush box of 2 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 49 | Supply and fix in repairs modular metal flush box of 3 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 50 | Supply and fix in repairs modular metal flush box of 4 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 51 | Supply and fix in repairs modular metal flush box of 6 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 52 | Supply and fix in repairs modular metal flush box of 8 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 53 | Supply and fix in repairs modular metal flush box of 12 module all as specified and directed. Make : legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 54 | Labour only for removing of ceiling fan from ceiling by disconnecting all electric conection and spray painting in situ with one coat of synthetic enamel white paint,filling cavities with filler after cleaning all dust/foreign materials and hanging only after completion of E/M and B&R works and connecting up including provision of three core copper cable of suitable size from ceiling rose or connector to fan and testing all as specified and directed |
| 55 | Labour only for removing of exhaust fan metal body AC single phase 230V of size 300/380mm from wall by disconnecting all electric conection and spray painting in situ with one coat of synthetic enamel white paint,filling cavities with filler after cleaning all dust/foreign materials and fixing only after completion of E/M and B&R works with anchor bolt of suitable size and connecting up including provision of three core copper cable of suitable size from ceiling rose or connector to fan and testing, making the surface good with the existing all as specified and directed |
| 56 | Supply and fixing in repair 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and Neutral in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 57 | Supply and fixing in repair 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning all as specified and directed |
| 58 | Supply and fixing in repair 40 to 100 Amp rating 415V, 10KA 'C' curve miniature circuit breaker (MCB) of Trible pole and Neutral in the MCB DB complete with connection testing and commissioning all as specified and directed |
| 59 | Supply and fixing RCBO for earth leakage,overload and short circuit protection 63A , four pole 300mA all as specified. |
| 60 | M&L for Earthing complete by using GI earth plate electrode 60cm × 60cm × 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to using GI earth lead of size 4mm dia by means of bolts, nuts, check nuts and washers etc made of galvanised iron and protected by galvanised iron light grade 25 mm bore & 20mm dia galvanised medium grade for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50 mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m, charcoal, lugs, common salt complete all as specified and directed and as shown on plate No.3 of SSR Part-I . Please Enable Macros to View BoQ information |
| 61 | M&L for Earthing complete by using GI earth plate electrode 60cm × 60cm × 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to using GI earth lead of size 4mm dia by means of bolts, nuts, check nuts and washers etc made of galvanised iron and protected by galvanised iron light grade 25 mm bore & 20mm dia galvanised medium grade for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50 mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m, charcoal, lugs, common salt complete all as specified and directed and as shown on plate No.3 of SSR Part-I . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender