Tender For Restoration/Renovation Of Ganesh Temple Near Makhdoom Sahib Srinagr.(Adv. Cost Rs. 48.44 Lacs) (Incl Cost Of Material+Gst)
Tender Value
48.44 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
3 days left
EMD
96880
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration/Renovation Of Ganesh Temple Near Makhdoom Sahib Srinagr.(Adv. Cost Rs. 48.44 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | DISMANTLING WORKS |
| 2 | Taking out existing CC interlocking paver blocks and stacking of serviceable/unserviceable material within 50 meter lead as per direction of Engineer-in-Charge |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.Thickness above 25mm and upto 40mm |
| 4 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:15.7.4 In cement mortar |
| 5 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar(for only 40%). vide qty 1.3 |
| 6 | Demolishing cement concrete manually/by mechanical meansincluding disposal of material within 50 meters lead as per direction of Engineer-incharge:15.2.1 1:3:6 or richer mix (i/c equivalent design mix) |
| 7 | Demolishing stone rubble masonary manually/ by mechanical means incl. disposal with 50 mtrs lead as per direction of EIC. |
| 8 | COMPOUND WALL/DEVRI GATE/POSTS |
| 9 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. |
| 10 | Providing & Laying of stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 11 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:(1:2:4, with 20 mm nominal aggregate size |
| 13 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level.(1cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.1 Foundations, footings, bases for columns |
| 15 | Steel Reinforcement for RCC work including straightening cutting,bending,placing in position and binding all complete upto plinth level TMT of grade Fe-500D |
| 16 | \\"Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)\\" |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | labour part for reuseable bricks 33% of ssr 2022 |
| 19 | P/L cement concrete coping 50mm thick with cement concrete 1:2:4 graded stone agg. 20mm nominal size) Crushed |
| 20 | 12mm Cement Plaster of mix 1:4(1 cement:4 coarse sand) |
| 21 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plasteredwall surface to preare the surface even and smooth complete. |
| 22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 24 | Cement concrete flooring 1:2:4 (1cement: 2 coarssandgradestone aggrgate) finished with a floatingcoat of neat cement includingcement slurry and curing complete, but excluding the costof nosing of steps et complete.40mm thick with 20 mm nominal size stone aggregate. |
| 25 | P/F of 25mm thick devri tiles laid on 20mm thick cement mortar (1:4) incl. filling of joints by neat cement all carriages, wastages complete. |
| 26 | Providing and laying chiseldressed Devri Stone of size 300x200 mm face with 150 mm depth incement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed 7.44.1 Fine chisel dressed |
| 27 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 28 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, platesetc .including welding,grinding,buffing, polishing and making curvature (wherever required) and fitting the samewith necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners,stainless steel bolts etc. of required size, on thetop of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge(for payment purpose only weight of stainless steel members shall be considered. |
| 29 | Providing corrugated G. S. sheet roofing/high rib including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.HIGH RIBED 0.50MM THICK |
| 30 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position |
| 31 | p/fixng of 12mm ply ply to ply mr gardes f approved brand and manugfacture making including all carriage c./o nails comlete job |
| 32 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete.second class deodar wood 12mm |
| 33 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 34 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 %and conforming to I.S. 15622, of approved make, in all colours andshades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. |
| 35 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by themanufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 36 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar plain white marble/Udaipur green marble/zebra black marble(16mm) |
| 37 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 38 | Providing and laying 60mm thickfactory made cement concrete interlocking paver blockof M-30 grade made by blockmaking machine with strongvibratory compaction and of approved size and design/shape laid in required colour and pattern over and including50mmthickcompacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge |
| 39 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointedwith neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Light shade using white cement |
| 40 | SANITARY |
| 41 | Providing PVC fitting items of approved make16mm dia ppr pipe |
| 42 | ppr Union 20mm |
| 43 | ball valve 25 mm |
| 44 | floor trap |
| 45 | P/F of thermo heated water geyser of approved brand havels or equivalent incl. necessary fiting 50 ltr. |
| 46 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm |
| 47 | P/Fof PVC waste pipe for sink or washbasin including PVC waste fittings complete flexible pipe 40mm dia |
| 48 | P/F of C.p grating on floor traps complete job |
| 49 | P/F of cp mixer for washroom of approved brand incl. all fixtures complete job. |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge 32mm nominal outer dia pipes. |
| 51 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 52 | ELECTRIC PART |
| 53 | p/fixing of conduit pipe of 2mm thick 25 mm as per requirement and as desired by site incharge |
| 54 | CONCEAL BOX FOR coceal LIGHT of approved brand and manufacture complete job |
| 55 | DEEP JUNCTION BOX for fan of approved brand and manufacture complete job |
| 56 | p/fixing of FAN point including wiring for FAN point in 1.5mm sq.mm pvc insulated copper wire and 2.5MMmm sq pvc INCLUDING insulatATION OF 1200MM /CIELING FAN/225MM EXHAUST FAN multistrand copper wire for FAN POINT WITH 350 WATT FAN DIMMER sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends .junction boxes etc,10 Amp S.pole 32 MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE ( divisional office building) |
| 57 | Cutting holes of required size in brick masonry wall for fixing of exhaustfan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge |
| 58 | P/F of exhaust fan of approved brand havels or equivalent with all necessary fixtures(wiring,mcb) as directed by EIC incl. shutter complete job. 300 mm dia |
| 59 | P/F of HEATING point including wiring for HEATING point in 2.5mm sq.mm pvc insulated copper wire and 4MMmm sq pvc insulated multistrand copper wire for HEATING POINT sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends .junction boxes etc,10 Amp S.pole 32 MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE |
| 60 | p/fixing of lighting point including wiring for lighing point in 1.5mm sq.mm pvc insulated copper wire and 2.5mm sq pvc insulated multistrand copper wire for lightingsub mains 6 amp one way switch.2mm thick pvc conduit/channael with bends .junction boxes etc,6Amp S.pole MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCB AND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE |
| 61 | P/F OF STAINLESS TEEL APHABETS ( GRADE 304) AS PER REQUIREMENT and desired by EIC of size (1'x6\\"x4\\") incl all labour component like griding matching fitting involved at site of work ,incl. all taxes involved upto site of work carriage,scaffolding , nuts complete job |
| 62 | Providing and fixing wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors,windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of reqd size with necessary screws as per direction of eng. in charge. second class kail wood 35mm thick. |
| 63 | CARRIAGE OF MATERIALS BY MANUAL MEANS. (Head Load) |
| 64 | Bricks 1000 No's for 150m Avg |
| 65 | SAND for avg lead of 150m |
| 66 | Stone aggregate for avg lead of 150m |
| 67 | CARRIAGE OF MATERIALS BY MECHANICAL TRANSPORT |
| 68 | Bricks 1000 No's for 25KM Avg by MT |
| 69 | Sand Avg 25 Km by MT |
| 70 | Stone aggregate for avg lead of 25km |
| 71 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender