Tender For Permanent Restoration Work For Damaged Due To Floods During August / Sepetember 2025 W.R.T Various Water Supply Schemes In Sub Divn. Kandi-Iii Under (Sasci 2026-27)1. Improvement / Restoration Of Pumping Station Impa By Way Of Construction
Tender Value
77.08 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
1.54 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Permanent Restoration Work For Damaged Due To Floods During August / Sepetember 2025 W.R.T Various Water Supply Schemes In Sub Divn. Kandi-Iii Under (Sasci 2026-27)1. Improvement / Restoration Of Pumping Station Impa By Way Of Construction Of Drainage System & Rising The Pumping Station Premises Incl. Plinth & Compound Wall2. Restoration Of Rising Main & Distribution Line Of Water Supply Scheme Sidhra. 3.Protection Of Pumping Station Palpad At Sidhra (Crate Work)4. Fabrication Of Steel Shed Of Dimension 6.0 X 4.0M For Pumping Machinary At Parle Badi. Sidhra
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | clarification for time of completion | Other | 14-Jul-2026 |
| 2 | 09-Jul-2026 | Date Extend | Date | 14-Jul-2026 |
| 3 | 04-Jul-2026 | clarification for time of completion | Other | 08-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-in-charge: 1:3:6 richer mix |
| 2 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material with in 50 meters lead as per direction of Engineer-in-charge: |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides andrammingofbottoms liftupto 1.5m, including getting out excavated earth and disposal of surplus excavatedearthas directed |
| 4 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) includingdisposal of excavated earth lead upto 50meters and lift upto 1.5 m,as directed by Engineer-in-Charge. |
| 5 | Supply of Wire Mesh Crate including carriage from nearest soource of site |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of Centering & Shuttering (All work upto Plinth Level with 1:4:8 (1 Cement : 4 Sand : 8 Graded stone agg) upto 40 mm |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of Centering & Shuttering (All work upto Plinth Level with 1:3:6 (1 Cement : 3 Sand : 6 Graded stone agg) upto 20 mm |
| 8 | Centring and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 9 | Centring and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 10 | Brick work with common burnt clay F.P.S. (non-modualar) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement :6 coarse sand) |
| 11 | Extra for Brick Work with common burnt clay bricks / cement concrete bicks in super-sturcture above plinth level upto floor five level |
| 12 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in: Cement mortar1:4 (1cement:4coarsesand) |
| 13 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 14 | 15mm thick Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) . |
| 15 | Removing mortar from bricks and cleaning bricks including stackingwithinaleadof50m. |
| 16 | FinishingwallswithwaterproofingcementpaintofrequiredshadeonNewwork([email protected]/10sqm) |
| 17 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3(1cement:1½ coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars |
| 19 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 gradedstoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete.1.3.3 50 mm thick with 20mm nominal size stone aggregate. |
| 20 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in Layer not exceeding 20 cm in trenches, plinth side of foundation etc complete |
| 21 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapprovedsteelprimerallcomplete. |
| 22 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mmangle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approvedsteelprimer. Using M.S.angles 40x40x6 mm for diagonal braces |
| 23 | Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on over lapping of sheets complete(uptoany pitchinhorizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape where ever required. |
| 24 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes,manually/bymechanicalmeansincludingstackingofpipeswithin50 meters leadas per direction of Engineer-in-charge: 50 mm to 100 mm nominal bore |
| 25 | Laying and fitting of G.I.pipes (all classes) complete excluding cost of pipes, fittings and Earthwork. 100mm dia G.I. pipes |
| 26 | Laying and fitting of G.I.pipes (all classes) complete excluding cost of pipes, fittings and Earthwork. 80mm dia G.I. pipes |
| 27 | Laying and fitting of G.I.pipes (all classes) complete excluding cost of pipes, fittings and Earthwork. 50mm dia G.I. pipes |
| 28 | Providing, Laying and fitting of G.I.pipes (all classes)complete Including cost of pipes, fittings but excluding Earthwork. G.I Pipe 150 mm (M) |
| 29 | Providing, Laying and fitting of G.I.pipes (all classes)complete Including cost of pipes, fittings but excluding Earthwork. G.I Pipe 100 mm (M) |
| 30 | Providing, Laying and fitting of G.I.pipes (all classes)complete Including cost of pipes, fittings but excluding Earthwork. G.I Pipe 100 mm (L) |
| 31 | Providing, Laying and fitting of G.I.pipes (all classes)complete Including cost of pipes, fittings but excluding Earthwork. G.I Pipe 80 mm (L) |
| 32 | Providing, Laying and fitting of G.I.pipes (all classes)complete Including cost of pipes, fittings but excluding Earthwork. G.I Pipe 65 mm (M) |
| 33 | Providing, Laying and fitting of G.I.pipes (all classes)complete Including cost of pipes, fittings but excluding Earthwork. G.I Pipe 65 mm (L) |
| 34 | Providing, Laying and fitting of G.I.pipes (all classes)complete Including cost of pipes, fittings but excluding Earthwork. G.I Pipe 50 mm (L) |
| 35 | Providing and fixing of 100 mm dia C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Class - II |
| 36 | Providing and fixing of 80 mm dia C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Class - II |
| 37 | Providing and fixing gun metal non-return valve of approved quality (screwedend) 150mm nominal bore |
| 38 | Providing and fixing gun metal non-return valve of approved quality (screwedend) 100mm nominal bore |
| 39 | Providing and fixing gun metal non-return valve of approved quality (screwedend) 65mm nominal bore |
| 40 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 100 mm Nominal Bore |
| 41 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 80 mm Nominal Bore |
| 42 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 65 mm Nominal Bore |
| 43 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm Nominal Bore |
| 44 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm Nominal Bore |
| 45 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 50 to 80 mm nominal bore |
| 46 | Welding of Joints by electric arc, welding incl. testing & commissioning of joints |
| 47 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, lead upto 50m and lift upto1.5m. |
| 48 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 49 | Supply of Soling Stones |
| 50 | Carriage of stones average 9 km by mechnaical transport from source to site of work |
| 51 | Carriage of Sand and Bazri from nearest source of supply to the site of work below 40mm size 20 km |
| 52 | Carriage of Sand and Bazri from nearest source of supply to the site of work below 40mm size 20 km |
| 53 | Carriage of bricks from nearest source of supply to the site of work 30 km by Mechanical Means |
| 54 | Carriage of boulders average 20 km by Mechanical means Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Jul 14, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Jul 08, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender