Tender For Construction Of Vulnerable Witness Deposition Centre At Bishnupur Sub-Divisional Court, Bishnupur, In The District Of Bankura.
Tender Value
2 Crore
Estimated cost
Bid Submission
24 Jul 2026
15 days left
EMD
4.01 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bankura → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Vulnerable Witness Deposition Centre At Bishnupur Sub-Divisional Court, Bishnupur, In The District Of Bankura.
BOQ
| Sl. No. | Item Description |
| 1 | Part-A Civil WorkDismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 2 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof. |
| 3 | Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). Depth upto 1.5 m. |
| 4 | For Protection of existing Court BuildingHire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-in-charge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). For additional depth beyond 1.5 m. and upto 3.00 m |
| 5 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm. |
| 6 | Depth of excavation for additional depth beyond 1500mm and upto 3000 mm but not requiring shoring. |
| 7 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete.With earth obtained from excavation of foundationFilling in foundation trench |
| 8 | Filling in foundation or plinth by Find sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of fine sand.Do- by fine sand |
| 9 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 10 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or infoundation or in foundation trenches. |
| 11 | Cement concrete with graded stone ballast (40 mm. size) excluding shuttering. In ground floorPakur Variety1:3:6 proportion |
| 12 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mixfoumula. In ground floor and foundation.[using concrete mixture]M 25 GradePakur Variety In Ground Floor |
| 13 | In 1st Floor |
| 14 | In 2nd Floor |
| 15 | In 3rd Floor |
| 16 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)25mm. to 30mm. shuttering without staging in foundation etc |
| 17 | 9 to 12 mm thick approved quality ply board shuttering in any concrete workIn Ground Floor |
| 18 | In 1st Floor |
| 19 | In 2nd Floor |
| 20 | In 3rd Floor |
| 21 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor / upto 4m.Tor steel/Mild steel JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSLIn Ground Floor |
| 22 | In 1st Floor |
| 23 | In 2nd Floor |
| 24 | In 3rd Floor |
| 25 | Brick work with 1st class bricks in cement mortar (1:4)In foundation & plinth |
| 26 | Brick work with 1st class bricks in cement mortar (1:6)In superstructure, Ground floor |
| 27 | In superstructure, First floor |
| 28 | In superstructure, 2nd floor |
| 29 | In superstructure, 3rd floor |
| 30 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) ground floor.In Super Structure, In Ground Floor |
| 31 | First Floor |
| 32 | 2nd Floor |
| 33 | Extra for using approved H.B netting in every third layer in 16 & 17 of subhead A above in any floor |
| 34 | 40 mm. thick damp proof with cement concrete (3:1.5:1) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. |
| 35 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement25 mm. thick |
| 36 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 37 | Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete.Area of each Granite slab 0.6 to 1.0 Square meter.In ground floor |
| 38 | In 1st Floor |
| 39 | In 2nd Floor |
| 40 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor)With 1:6 cement mortar20 mm thick plasterGround Floor |
| 41 | In 1st Floor |
| 42 | In 2nd Floor |
| 43 | In 3rd Floor |
| 44 | With 1:6 cement mortar 15 mm. thick plasterGround Floor |
| 45 | In 1st Floor |
| 46 | In 2nd Floor |
| 47 | In 3rd Floor |
| 48 | With 1:4 cement mortar10 mm. thick plasterGround Floor(internal) |
| 49 | In 1st Floor |
| 50 | In 2nd Floor |
| 51 | In 3rd Floor |
| 52 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.Ground Floor (external |
| 53 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts)[Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)ln Ground FIoor:(size not Iess than 800mmX 800 mm X 10.2 mm thick) |
| 54 | In 1st Floor |
| 55 | In 2nd Floor |
| 56 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N |
| 57 | In 1st Floor |
| 58 | In 2nd Floor |
| 59 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.mArea of each tile above 0.09 Sq.mColoured decorativeIn Ground Floor |
| 60 | In 1st Floor |
| 61 | In 2nd Floor |
| 62 | Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Border concrete if necessary to be paid separately]. |
| 63 | Supplying & laying 25 mm thick Tiles of any shade of approved quality as per relevant IS code, IS : 1237:2012 laid in pattern as directd for footpath ramp, staircase of public building over 25 mk thick (avg) Cement mortar (1:3) & Cement slurry @ 4.4 kg/sqm atg back side of Block. (Cement for Mortaor ^ Slurry to be supplied by Department). in all respect i.e. with all labour and materails.[Border concrete if necessary to be paid separtely.Note: Sub-grade CBR should not be less than 5.Grey |
| 64 | Brick edging 75 mm wide with picked jhama bricks, laid true to line and level including cutting necessary trench in soil or in hard metalled surface, laying the bricks and repacking the trench (on both side of the edging) with spoils and ramming the same thoroughly complete as per direction. Brick-on-end edging (250 mm) depth. |
| 65 | Wood work in door and window frame fitted and fixed complete icluding a protective coat of painting at the contact surface of the frame. Sal :MalayasianIn ground floor |
| 66 | In 1st Floor |
| 67 | In 2nd Floor |
| 68 | In 3rd Floor |
| 69 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)35mm thick shutters with 19mm thick panel of size 30 to 45 cm.leaf) Sishu, Gamar, Champ, Badam,Bhola, Mogra, Hallak. |
| 70 | In 3rd Floor |
| 71 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:35mm thick shutters (single leaf)In Ground Floor |
| 72 | In 1st Floor |
| 73 | In 2nd Floor |
| 74 | Extra over item No. B (11,12) for providing:Rabbet cutting in shutters [Note: Mode of measurement-Measurement shall be made on the basis of area of shutter] |
| 75 | Double leaf shutters [Note: Mode of measurement-Measurement shall be made on the basis of area of shutter] |
| 76 | M.S. clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction.40mm. X 6mm. 250mm. Length. |
| 77 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.100mm. X 50mm. X1.250mm. |
| 78 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).In 10-12 Micron thickness Annodizing filmNatural whiteFixed glazing.Top, bottom and side member. |
| 79 | Mullion. |
| 80 | Glazing clip. |
| 81 | Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)Top , bottom & side member. |
| 82 | Intermediate member. |
| 83 | Glazing clip. |
| 84 | Fixed partitions.(Unsupported length of vertical member above 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)Top , bottom & side member. |
| 85 | Intermediate member |
| 86 | Glazing clip. |
| 87 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing filmNatural whiteFor 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kgper Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]for 3 track sliding window |
| 88 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987; coloured, toughened glass conforming to IS: 2553-1992 (part-II)6mm thickcoloured. Toubhened glass |
| 89 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:150mm long x 12mm dia. bolt. |
| 90 | 300mm long x 12mm dia. bolt. |
| 91 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactgured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. 300mm x 19mm dia. bolt. |
| 92 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:With continuous plate base (hexagonal/round rod)150mm grip x 10mm dia rod. |
| 93 | 125mm long wooden buffer block.With Sal : Malayasian |
| 94 | Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.With 75mm iron Butt-hingeSal : Malayasian |
| 95 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glassfibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as perapproved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria.. 66mm X 90 mm |
| 96 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.Standard Size : 2050mm x 905/670mm32mm thickIn ground floor |
| 97 | In 1st Floor |
| 98 | In 2nd Floor |
| 99 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.In ground floor |
| 100 | In 1st Floor |
| 101 | In 2nd Floor |
| 102 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracigs properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. In ground floor |
| 103 | In 1st Floor |
| 104 | In 2nd Floor |
| 105 | In 3rd Floor |
| 106 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.Weight of Strainless Steel railing per metre 6.5 Kg (approx)stair railing |
| 107 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)GF inside same as inside plaster |
| 108 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)One CoatWater based interior grade Acrylic Primer |
| 109 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer)(Two coats)Luxury Quality |
| 110 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.One coatIn ground floor |
| 111 | In 1st Floor |
| 112 | In 2nd Floor |
| 113 | In 3rd Floor |
| 114 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Premium 100% Acrylic EmulsionTwo Coats In ground floor |
| 115 | In 1st Floor |
| 116 | In 2nd Floor |
| 117 | In 3rd Floor |
| 118 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smootheningsurfaces by sand papering etc. |
| 119 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 120 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With super gloss (hi-gloss) - On timber or plastered surface : Two coats (with any shade except white) |
| 121 | With super gloss (hi-gloss) - On steel or other metal surface : Two coats (white any shade except White) |
| 122 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.U.P.V.C. Pipes110mm dia. |
| 123 | U.P.V.C. fitting Shoe110mm |
| 124 | Bend 87.5 degree110mm |
| 125 | Painting block letters or digits in Black Japan or any approved paint as per direction. Size above 2.5 cm. and upto 4 cm. |
| 126 | Size above 4 cm. and upto 5 cm. |
| 127 | Size above 12.5 cm. and upto 15 cm. |
| 128 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.Pakur VarietyIn Ground Floor |
| 129 | In 1st Floor |
| 130 | In 2nd Floor |
| 131 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer'sspecification [Cement to be supplied by the Department] |
| 132 | Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-usible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.).Membrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse) |
| 133 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.Pakur Variety 1st floor |
| 134 | Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades. |
| 135 | Part-B : S & P WorkTaking out pipes of existing tube well including strainer etc. complete for portion of length :Upto 20 metre below G.L.200 mm dia |
| 136 | Beyond 20 metre below G.L.200 mm dia |
| 137 | Beyond 20 metre below G.L.100 mm dia |
| 138 | Supplying, fitting and fixing shower of approveed brand and make make tested to 21 kg per sq. cm. (for water lines only).Chromium plated round shower with revolving joint (Equivalent to Code No. 541(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 139 | Hand Shower(Health Faucet) with 1mtr Fexible Tube with WallHook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 140 | Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar). |
| 141 | Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special ofESSCO or similar brand) |
| 142 | Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 143 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar). |
| 144 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)\\"For Exposed WorkPVC Pipes32 mm |
| 145 | 40 mm |
| 146 | 50 mm |
| 147 | For Concealed Work15 mm |
| 148 | 25 mm |
| 149 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes& fittings conforming to IS-15778: 2007Ball Valve50 mm dia |
| 150 | 40 mm dia |
| 151 | 32 mm dia |
| 152 | 25 mm dia |
| 153 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 154 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer2000 litre capacity |
| 155 | Labour for hoisting plastic water storage tank. above 1500 litre up to 5000 litre capacity.Upto 3rd story from G.L. |
| 156 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 157 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.550 mm X 400 mm size |
| 158 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 159 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.Sink only630 mm X 550 mm x 180 mm |
| 160 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.450 mm long |
| 161 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long |
| 162 | Supplying, fitting & fixing Aluminium domical grating.100 mm |
| 163 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides).100 mm |
| 164 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992Single Socketed 3 Meter Length110 mmDouble Socketed 0.9 Meter Length |
| 165 | 110 mm |
| 166 | FittingsPlain Y100 mm |
| 167 | Door Bend (LH) & (RH) 110 mm |
| 168 | Pipe Clip 110 mm |
| 169 | Vent Cowl110 mm |
| 170 | W.C. Connector (450 mm long) W / lipring |
| 171 | Multi Floor Trap without Top tile & Strainer |
| 172 | Rubber Lubricant 500 ML |
| 173 | Solvent Cement 250 ML |
| 174 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary] and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials.Above ground110 mm dia. |
| 175 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap |
| 176 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.470 mm X 280 mm X 340 mm |
| 177 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).450 mm X 350 mm. |
| 178 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C.Plastic (hallow type) white |
| 179 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.Polythene Flush Pipe |
| 180 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished. |
| 181 | Supplying, fitting and fixing soap holder. Fibre glass |
| 182 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 183 | Supplying, fitting and fixing towel rail with two brackets.C.P. over brass 25 mm dia. and 600 mm long |
| 184 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.With Pakur variety.JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL |
| 185 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. For 20 usersWith Pakur variety.JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL |
| 186 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00m inside dia.JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL |
| 187 | Part-C : Tube WellLabour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre).First 50 metre |
| 188 | Next 50 metre |
| 189 | Next 50 metre |
| 190 | Rest 100 metre |
| 191 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). PVC Pipes (Dia)100 mm |
| 192 | 200 mm |
| 193 | Threaded End Cap(Dia)100 mm |
| 194 | Supplying, fibre glass reinforced Epoxy resin slotted of 1 mm slot width in 6.1m length of approved make and as per direction of the Engineer - in - Charge100 mm nominal dia6.00 mm wall thickness |
| 195 | Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report. |
| 196 | Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality. |
| 197 | Supplying, fitting and fixing heavy type bell mouth reducing socket.100 mm X 200 mm |
| 198 | Supplying, fitting and fixing G.I. cap at top200 mm |
| 199 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 200 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete. |
| 201 | Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete. |
| 202 | Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. |
| 203 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 204 | Supplying M.S. male / female adopter of approved make and brand for coupling of M.S. pipe and fibre glass strainers, as per direction of the Engineer - in - Charge.100 mm |
| 205 | Providing 200 mm centre guide.With Clamp |
| 206 | Add GST @ 18% on Rs.15957335.00 over Item No. 1 to 205 |
| 207 | Add Labour Welfare Cess @ 1% on Rs.18829655.00 over Item No. 1 to 206 |
| 208 | Part-D Non Schedule ItemSupplying ,fitting & fixing Portable Co2 type fire extinguisher capacity 4.5 kg .I.S. 2878 including all fills, brackets and including all other incedentalcharges (i.e. GST, CESS etc.) |
| 209 | Supplying ,fitting & fixing Portable ABC type fire extinguisher capacity 2 Kgs.I.S. 15683 - 2006 including all fills, brackets and including all other incedentalcharges (i.e. GST, CESS etc.) |
| 210 | Supplying ,fitting & fixing Portable ABC type fire extinguisher capacity 6 Kgs.I.S. 15683 - 2006 including all fills, brackets and including all other incedentalcharges (i.e. GST, CESS etc.) |
| 211 | Water Co2 type fire extinguisher capacity 9 ltr cartidge type fire extinguisher with fixing arrangment. |
| 212 | PUMP INSTALLATION : S/D of 3HP Pump motor (submersible) with height and discharge as per direction of EIC(Make-KSB 7C/ 15) |
| 213 | Supplying Fixing pressure gauge as per direction of E.I.C |
| 214 | Supplying Fixing 50mm dia NVR as per direction of E.I.C |
| 215 | E.I. Work: Supplying & laying 3 core 2.5 sqmm flat Cable(Finolex/PWD approved) for submersible pump motor set |
| 216 | Supplying & fitting of Pump starter 4HP realay range 4 to 6.5 . |
| 217 | Fire Hydrant Pump with minimum head 25mtr & minimum speed 25 mtr |
| 218 | HYDRANT SYSTEM: MS pipe up to 150NB as per IS: 1239,part -1 (Medium Grade) and 200NB & above as per IS: 3589, thk 6mm with fittings & required Structural Steel for support: 200NB |
| 219 | 150NB |
| 220 | 25 NB |
| 221 | CI Butterfly valve as per IS: 13095 with fittings 150NB |
| 222 | SS Single headed hydrant valve as per IS: 5290 , type A |
| 223 | SS Branch pipe with nozzle (19mm) as per IS: 903 with fittings . |
| 224 | 15 mtr long RRL Hose as per IS: 636 with fittings . |
| 225 | Hose Reel made of 18 SWG M.S. sheet along with 30mtr long & 20mm dia ISI marked rubber hose with shut- off Nozzle as per IS: 884. |
| 226 | Hose Box febricated from 16 SWG M.S Sheet (IS:513) size 750 X 600 x 250 mm with 3mm thk glass & fittings. |
| 227 | CI Air Release valve(25 NB) with fittings Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender