|
| 1 | Repairing Toilet Blocks owned by Nagar Parishad Digras as per requirement |
| 2 | Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. |
| 3 | Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. complete. |
| 4 | Excavation for foundation in earth ,soil of all types,'sand, gravel and soft murum, including removing theexcavated material up to a distance of 50 m. beyond the building area , stacking and/or spreading as directed dewatering manually, preparing the bed for the foundation and necessary back filling, ramming,watering (Excluding shoring and strutting )etc. complete. (Lift upto 1.5 m.) [Spec.No. :Bd.A.1 Page No. 259 ] (C.S.R.I.NO21.02 p.No.150) |
| 5 | Excavation for foundation in hard murum and boulders including removing the excavated materials up to a distance 50 metres,beyond the building area and stacking and/or spreading as directed, dewatering mannually,preparing the bed for the foundation and necessary backfilling ramming, watering etc. complete. (Excluding shoring and strutting )(Lift upto 1.5 m.) [Spec.No. :Bd.A.3 Page No. 259 ] (C.S.R.I.NO 21.12 p.No.151) |
| 6 | Transportation of material obtained from BDW debris of various sorts including necessary16 excavation/loosing including loading, unloading and conveying and disposing as directed.(a) For 3 Km. (C.S.R.I.NO p.No. ) |
| 7 | Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering etc complete. Spec. No. : As directed by Engineer-in-charge. (C.S.R.I.NO.21.40 p.No. 154 ) |
| 8 | Providing and laying in situ, cement concrete inM10 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, plywood/steel formwork, compacting, finishing uneven and honeycombed surface curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with Scada enabled, with fine aggregate Natural sand/crushed sand finely washed Spec. No. : Bd.E. 1/Page No. 287/I.S. 456 (2000) C.S.R.I.NO.24.01 Pg 217 |
| 9 | Providing and casting in situ cement concrete of required grade of trap/ granite/quartzite/gneiss metal for R.C.C.work in foundations like raft,grillages,strip foundations and footings of R.C.C.Columns and steel stanchions including bailing out water,plywood/steel formwork compacting, roughening the surface if special finish is to be provided, finishing uneven and honey combed surface with C.M.1:3 of sufficient minimum thickness to give smooth and even surface etc.complete. (Excluding reinforcement and structural steel, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) For C.C.M-20 Spec. No. : Bd.F. 3/Page No. 298/I.S. 456 (2000) (C.S.R.I.NO 25.11 p.No 185 ) |
| 10 | Providing and casting in situ cement concrete of required grade of trap/ granite/quartzite/gneiss metal for R.C.C.Columns as per detailed design and drawings or as directed,including steel centering,plywood/steel formwork compactinn, finishing uneven and honey combed surface with C.M.1:3 of sufficient minimum thickness to give smooth and even surface or roughening the surface if special finish is to be provided and curing etc.complete. Including use of plastisizer wherever necessary as directed by Engineer (Excluding reinforcement including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) For C.C.M-20 with Scada enabled, with fine aggregate Natural sand/crushed sand finely washed (C.S.R.I.NO 25.31 p.No.188 ) |
| 11 | Providing and casting in situ cement concrete of M-20 grade of trap/granite/quartzite/gneiss metal for R.C.C.beams & lintels as per detailed design & drawings or as directed,including steel centering,plywood/steel formwork steel props, compaction, finishing uneven & honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete. Including use of plastisizer wherever necessary as by Engineer incharge. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with Scada enabled, with fine aggregate Natural sand/crushed sand finely washed Spec. No. : Bd.F.6/Page No. 300/I.S. 456 (2000) (C.S.R.I.NO 25.5 p.No.191 ) |
| 12 | Providing 2nd class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth of external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. Spec.No.: Bd.G.1/Page No.313 (C.S.R.I.NO 27.01 p.No 215 ) |
| 13 | Filling in plinth and floors with contractors approved material / murum / stone dust in 15cm. to 20cm. layers including watering and compaction complete. Spec. No. : Bd.A. 11/Page No. 263 (C.S.R.I.NO 21.37 p.No.157) |
| 14 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in super structure including striking joints, racking out joints wateringand scaffolding complete. Spec.No.: Bd.G.5/Page No.315 (C.S.R.I.NO.27.05 p.No.215 ) |
| 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. (C.S.R.I.NO.27.06 p.No.215 ) |
| 16 | Providing and casting in situ cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Spec. No. : Bd.E. 3/Page No. 288/I.S. 456 (2000) (C.S.R.I.NO 24.16 p.No 183) |
| 17 | Providing and casting in situ cement concrete of required grade of trap/granite/quartzite/gneiss metal for R.C.C.slabs & landings as per detailed design & drawings or as directed,including steel centering,plywood/steel formwork steel props, compaction, finishing uneven & honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fan hook box of 2mm.thick M.S.Sheet rectangular size 180 x 100mm.with required depth, with holes or notches, as required, bottom and top lids of 1.6mm.thick M.S.Sheet fixed with 3.5mm.dia.round headed screws together with 12mm.dia.M.S.bar bent to shape with hooked ends for fan hook and painting to exposed surface and curing etc.complete. (Excluding reinforcement, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with Scada enabled, with fine aggregate Natural sand/crushed sand finely washed (C.S.R.I.NO.25.70 p.No227) |
| 18 | Providing cement based water proofing treatment compound in CM 1:3 with 12mm thk layer includding curing with brick bats laid in required C.S.R.I.NO.31.04 Pg.255 |
| 19 | Providing and fixing in positionTMT-FE -500 bar reinforcement of various diameters for R.C.C.pile caps,footings,foundations,slabs,beams,columns,canopies,staircase,newels,chajjas,lintels,pardis,copings,fins arches etc.as per detailed designs,drawings and schedules including cutting bending,hooking the bars,binding with wires or tack welding and supporting as required etc.complete. Spec. No. : Bd.F.17/Page No. 306 (C.S.R.I.NO.26.33 p.No.202 ) |
| 20 | Providing internal cement plaster 20 mm thick in a single coat in cement mortar 1:5 without neeru finish to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete Spec.No.: Bd.L.2/Page No.368 Rate as per C.S.R.I.NO.32.063 Pg.260 |
| 21 | Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:5 without neeru finish to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete Spec.No.: Bd.L.2/Page No.368 Rate as per C.S.R.I.NO.32.03 Pg.260 |
| 22 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete Spec.No.: Bd.L.2/Page No.368 C.S.R.I.NO 32.01 Pg.260 |
| 23 | Providing sand faced plaster for external portion in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. complete.Spec.No.: Bd.L.7/Page NO.369 C.S.R.I.NO.32.11 Pg.224 |
| 24 | Providing patta on concrete/ plastered surface 12 mm to15 mm thick in C.M.1:3 in line, levelincluding drip mould if necessary, scaffolding,finishing, curing etc. complete. a) 50 mm wide Rmt. 37.00 17.00 b) 100 mm wide Rmt. 50.00 21.00 Rate as per C.S.R.I.NO.32.24 Pg 262. |
| 25 | Providing and laying Vitrified matt finish Tiles size590-605mm & 8-10 mm thk for Flooring on a bed of C.M. 1:4 including cement float, filling joints with neat cement slurry, curing rubbing, polishing and cleaning complete Spec.No.: Bd.M.3/Page No.380 (C.S.R.I.NO.33.42p.No.236 ) |
| 26 | Providing and laying vitrified tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting (C.S.R.I.NO.33.43p.No.236 ) |
| 27 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (C.S.R.I.NO.33.68 p.No 233) |
| 28 | FRP door shutter 30mm thk Factory made shutter (C.S.R.I.NO.BD-T Item no 53, page no 530 |
| 29 | Providing & fixing UPVC SOIL/VENT/WASTE SWR pipes of required diametr conforming to I.S. 13592 including necessary fittungs. 1) 75 MM dia pipe 2) 100 MM dia pipe (C.S.R.I.NO 45.52 p.No299) |
| 30 | Providing hoisting,& fixing in position of approved make high density polyethylene UV stabilised conforming to I.S.12701,water storage tank with necessary connection testing etc complete.. Spec.No.:As directed by Engineer-in-charge (C.S.R.I.NO.42.53 p.No.300) |
| 31 | Providing & fixing White Glazed earthenware \\" Orissa type W.C.Pan 600 x 400mm including P or S trap UPVC soil & veent pipe upto the outside face of the wall.etc complete... Spec.No.:As directed by Engineer-in-charge. C.S.R. I.NO 42.53Pg 350 |
| 32 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. (C.S.R.I.NO 42.3 p.No.296 |
| 33 | Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. C.S.R. I.NO 41.60 Pg 339 |
| 34 | Providing & fixing white glazed earthenware Wash Hand Basin including brackets,rubber plugs & brass chain,stop tap,chromium plated bottle trap& necessary pipe connection Spec.No.:As directed by Engineer-in-charge. C.S.R. I.NO 41.64 Pg 340 |
| 35 | Providing fine cement finish 1.5 mm thick over green plastered surface including scaffolding and curing etc.complete. Spec.No.: As directed by engineer incharge.) C.S.R.I.NO.32..21 Pg.262 |
| 36 | Providing and laying inwall/ceiling/floor 15mm CPVC pipe …etc complete C.S.R. I.NO 42.61 Pg 351 |
| 37 | Providing and laying inwall/ceiling/floo 25mm CPVC pipe …etc complete (C.S.R.I.NO42.55 p.No.300) |
| 38 | Providing and laying inwall/ceiling/floor 40mm CPVC pipe …etc complete (C.S.R.I.NO42.55 p.No.300) |
| 39 | a)Providing and fixing 15 mm diameter concu-ssion push button type brass/ gun metal self 14 closing tap including necessary socket, testing etc. complete. C.S.R. I.NO 41.53Pg 338 |
| 40 | a) Providing and fixing 15 mm dia. Ball cock medium type with PVC float including 84 sockets and necessary fittings and tested as per municipal requirement, testing etc. complete.(Prior approval of sample and brand 15mm 40MM C.S.R. I.NO 42.37 Pg 348 |
| 41 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. C.S.R. I.NO 42.12 Pg 348 |
| 42 | Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete. C.S.R.I.NO.5.20 Pg. |
| 43 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (C.S.R.I.NO.36.11 p.No 247 ) Please Enable Macros to View BoQ information |
