|
| 1 | RAW WATER PUMPING PLANTCost towards all labour, tools, tackles and technician for lifting of exisiting sub. Pump set along with 50 ft column pipe from tubewell. |
| 2 | Cost for Supplying, Installation, Testing and Commissioning of submersible pumpset (with SS/Bronze impeller), Pump having discharge 57 m3/hr and head-52.5 m , (or suitable discharge & head) conforming to I.S. 8034 and motor conforming to I.S. 9283 with stainless steel pump shaft. Motor suitable for working on 415V ±10%, 3Phase, 50Hz, A.C. Supply with cable guard, thrust carbon/fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/double run shall be provided with pump. with C.P. & OHC. [Make-KSB/ Kirloskar/ Crompton/ Any reputed make ISI Marked] |
| 3 | Supply fitting & fixing of 25 mm dia galvanized tensie steel rope for holding 20HP submersible pump set etc complete |
| 4 | Cost towards supply and laying of 3 Core x 10 sq. mm flat flexible submersible cable with copper conductor, PVC insulated and PVC schethed 1100V grade from starter to motor, Make- Finolex/ Havells/ Polycab/ Mescab/ Any reputed ISI marked |
| 5 | Cost towards supply and laying of 3\\" dia G.I / MS Column pipe in 3m length including(a) Cost towards supply and laying of 3\\" dia G.I / M.S Column pipe in 3m length, Heavy duty, ISI Marked. |
| 6 | (b) Cost towards supply, fitting and fixing of 3\\" dia heavy duty flange at both ends. |
| 7 | (c) Cost towards welding of flange including welding and fitting of stiffner-4Nos at both end of the pipe. |
| 8 | (d) Cost towards supply and fitting of nut, bolt, washers- 40Kg Approx, rubber packing-20Kg. etc all complete. |
| 9 | (e) Cost for all labour, tools, tackle and technician for lowering/ laying of submersible pump set along with column pipe. |
| 10 | Cost towards jointing of 3Core submersible cable-4 Joints and Socketing of terminal ends with s/f of terminal socket etc including all materials, labour, tools,tackles and electrician charges.-12 Ends. For 2 pump set. |
| 11 | Supplying 75 KVA Servo controlled voltage stabilizer suitable for input voltage 150/220-450/460 volts, output voltage of 400 volt±1%, 3 Ph, 50 Hz, with copper wound transformer (oil cooled), Unbalanced type, Air Cooled/Oil cooled, Three Phase, Frequency : 50 Hz. Speed of Correction : 35V/ second. Regulation : + 1% from no load to full load.Ambient Temperature : 0 to 55 degree centigrade (Designed for indoor/ outdoor continuous operation. Operation : Automatic cum Manual, MCB for short Circuit & Over Load Protection, High Volt -Low Volt Indicator & Volt Meter with all necessary Switches and Indicator the stabilizer shall function satisfactory even if incoming supply is unbalanced between phases within range of 10%. The stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and output voltage, Auto/Manual selector switch, Raise/Low push button etc. suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. All three phases shall independently monitored and corrected.Make – Powerline/Servokon/ Genius/Jindal |
| 12 | Supplying and laying 70 sq. mm x 3.5 core PVC sheathed & PVC insulated, 1.1 KV grade aluminium unarmoured cable. Make – Polycab/ KEI/ Universal/ISI |
| 13 | Supplying and fitting 225 Amp changeover switch. Make – Havell’s/ HPL |
| 14 | Supplying and filling transformer oil. |
| 15 | Providing floor/wall mounted cubical L.T power control panel fabricated with MS sheet and painted, dust and vermin proof, proper ventilated consisting of:-(a)Proper distribution 200 amp copper bus bar 4 Pole-1 set(b)Micro processor base TPN MCCB 200 Amp L&T/ siemens make with earth fault relay for incoming feeder – 1No.(c)MCCB 150 Amp TP L&T /Siemens/BCH/Schneider make for outgoing feeder-3Nos(1no for each pump sets ) , 32A DP MCB for lighting -1 no.(d)Suitable size of fully automatic star delta starter L&T/ BCH/Schnider/Havells make -3nos.(1no for each pump sets )(e)0-500 V voltmeter with selector switch-1 set CT operated ampere meter (0-120A) with CT- 2 sets, phase indicating neon lamp- 6nos .(f)S.P.P. -2nos doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. |
| 16 | Cost towards making chemical earthing with copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry work with cover plate having locking arrangements and watering pipe 2.7 metre long etc with charcoal/coke and salt etc as required for chemical earthing. |
| 17 | Supplying and laying of 8 SWG GI wire for making earthing connection in two row from earthing station to panel to motor |
| 18 | Supplying and fitting 225 Amp MCCB main switch. Make – Havell’s/ HPL |
| 19 | Cost of doing internal light wiring of Pump house with 7/20 single core copper wire will all required making short point -1 no, medium point-4 nos, long point- 1 no with supplying and fixing 4′x40 watt tube light-3 Nos, 25 Watt, led flood light with bracket-1 no etc all complete. |
| 20 | Providing and supplying ISI mark GI pipe of 100 mm dia for water works with confronting IS standard including all tools,tackles and technician jointing accessories flange nut bolt rubber insertion jointing materialetc.all complete for three delivery line 60 feet each. |
| 21 | CLEAR WATER PUMPING PLANT:- Cost towards dismantling of old 40HP C/F pump motor from base plate by gas cutter, cost for breaking of old existing foundation and removing of all garbage from pump house with all labour tools, tackles and technician cost. Making new PCC foundation for above Centrifugal pump set of casting of new PCC foundation of size 5' X 3' X 3' deep with S/F of 5/8\\" X 3' long foundation bolt-6nos, cement, sand, stone chips and plastering and punning of exposed surface etc all complete. |
| 22 | Cost towards supplying of HSC C/F pump capable for discharging 114m3/h against total head 49 m (Make: Kirloskar/Crompton greese/ Jyoti/ Mather & Platt/WPIL) coupled with sutibale size of squirell cage 3 phase induction motor(Make: Kirloskar/Crompton Greaves/ Jyoti/ ABB/BHEL) operated on 415V±10%, 50c/s, 1450 rpm fitted on common channel fabricated base plate with required size of heavy duty , sluice valve-1No., N.R. valve-1No, Pressure Gauge-1No.,etc all complete. |
| 23 | Cost for Supplying and laying of 3Core 16 Sq. mm, Copper Cable unarmoured, P.V.C insulated and P.V.C. Sheathed 1100 V grade with ISI mark from motor to starter in 2 length each for both motor. |
| 24 | Cost for making and fitting of 6\\" dia common header with S/F of 6\\"dia heavy duty GI pipe-6mtr, 6\\"dia bend-2nos, 6\\" dia flange-10nos, rubber insertion-15Kg. Nut+bolt+washer-16Kg, cutting of pipe in require length and duing complete welding etc all complete with all labour tools and tackles. |
| 25 | Cost for doing socketing of 3 Core 16 sqmm cable, with supplying and fitting of copper lugs with all required insulating materials. |
| 26 | Supplying 100 KVA Servo controlled voltage stabilizer suitable for input voltage150/220-450/460 volts, output voltage of 400 volt±1%, 3 Ph, 50 Hz, with copper wound transformer (oil cooled), Unbalanced type, Air Cooled/Oil cooled, Three Phase, Frequency : 50 Hz. Speed of Correction : 35V/ second. Regulation : + 1% from no load to full load.Ambient Temperature : 0 to 55 degree centigrade (Designed for indoor/ outdoor continuous operation. Operation : Automatic cum Manual, MCB for short Circuit & Over Load Protection, High Volt -Low Volt Indicator & Volt Meter with all necessary Switches and Indicator the stabilizer shall function satisfactory even if incoming supply is unbalanced between phases within range of 10%. The stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and output voltage, Auto/Manual selector switch, Raise/Low push button etc. suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. All three phases shall independently monitored and corrected.Make – Powerline/Servokon/ Genius/Jindal |
| 27 | Supplying and laying 70 sq. mm x 3.5 core PVC sheathed & PVC insulated, 1.1 KV grade aluminium unarmoured cable. Make – Polycab/ KEI/ Universal/ISI |
| 28 | Supplying and filling transformer oil. |
| 29 | Supplying and fitting 225 Amp changeover switch. Make – Havell’s/ HPL |
| 30 | Supplying and fitting 225 Amp MCCB main switch. Make – Havell’s/ HPL |
| 31 | Providing floor/wall mounted cubical L.T power control panel fabricated with MS sheet and painted, dust and vermin proof, proper ventilated consisting of:-(a)Proper distribution 200 amp copper bus bar 4 Pole-1 set(b)Micro processor base TPN MCCB 200 Amp L&T/ siemens make with earth fault relay for incoming feeder – 1No.(c)MCCB 150 Amp TP L&T /Siemens/BCH/Schneider make for outgoing feeder-2 Nos(1no for each pump sets ) , 32A DP MCB for lighting -1 no.(d)Suitable size of fully automatic star delta starter L&T/ BCH/Schnider/Havells make -2 nos.(1no for each pump sets )(e)0-500 V voltmeter with selector switch-1 set CT operated ampere meter (0-120A) with CT- 2 sets, phase indicating neon lamp- 6nos .(f)S.P.P. -2nos doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. |
| 32 | Cost towards making chemical earthing with copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry work with cover plate having locking arrangements and watering pipe 2.7 metre long etc with charcoal/coke and salt etc as required for chemical earthing. |
| 33 | Supplying and laying of 8 SWG GI wire for making earthing connection in two row from earthing station to panel to motor |
| 34 | Cost of doing internal light wiring of Pump house with 7/20 single core copper wire will all required making short point -1 no, medium point-4 nos, long point- 1 no with supplying and fixing 4′x40 watt tube light-3 Nos, 25 Watt, led flood light with bracket-1 no etc all complete. |
| 35 | Cost for supplying and fixing of 40 watt LED flood light with bracket with all fittings and accessories etc all complete for Clear water premises. With C.P. & OHC. [Make-Havells/Syska/Mescab/Bajaj/Any reputed make.] Please Enable Macros to View BoQ information |
