Tender For Redevelopment Lord Gupteswar Temple In Boipariguda Block Of Koraput District.
Tender Value
19.33 Crore
Estimated cost
Bid Submission
14 Jul 2026
9 days left
EMD
19.34 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Redevelopment Lord Gupteswar Temple In Boipariguda Block Of Koraput District.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKEarthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.Parking, Pathway & Paving |
| 2 | Lord Shiva Theme Park |
| 3 | Fencing Wall |
| 4 | Mundan Pindi and Ganesh Temple. |
| 5 | Sculptures & Murals |
| 6 | Tensile Structure Near Temple Entrance |
| 7 | Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.Bol-Bom Rest Shed |
| 8 | Coconut Shop |
| 9 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 10 | Bhajan Mandap Near Temple |
| 11 | Temple Mukhasala & Kitchen |
| 12 | Dipa Ghara |
| 13 | Covering of Open to Sky area around Temple Cave |
| 14 | Mundan Pindi and Ganesh Temple. |
| 15 | Lord Shiva Statue Base |
| 16 | Drainage System |
| 17 | Water Cascade |
| 18 | Watch Tower near Ghat |
| 19 | Pathway to Caves |
| 20 | Seating Benches |
| 21 | Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as directed by the Engineer-In-charge.Bol-Bom Rest Shed. |
| 22 | Coconut Shop |
| 23 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 24 | Bhajan Mandap Near Temple |
| 25 | Temple Mukhasala & Kitchen |
| 26 | Dipa Ghara |
| 27 | Watch Tower near Ghat |
| 28 | Carriage of earth by mechanical means with cost of all lead & lift upto 5 km including cost of all labour, T&P etc., comp. as directed by the Engineer-In-charge.Bol-Bom Rest Shed. |
| 29 | Coconut Shop |
| 30 | Bhajan Mandap Near Temple |
| 31 | Temple Mukhasala & Kitchen |
| 32 | Dipa Ghara |
| 33 | Mundan Pindi and Ganesh Temple. |
| 34 | Lord Shiva Statue Base |
| 35 | Water Cascade |
| 36 | Watch Tower near Ghat |
| 37 | Seating Benches |
| 38 | Filling Foundation and plinth with avelable excavated earth including leveling and watering, all labour and matrials complete as directed by the Engineer-In-charge.Parking, Pathway & Paving |
| 39 | Mundan Pindi and Ganesh Temple. |
| 40 | Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.Parking, Pathway & Paving |
| 41 | Bol-Bom Rest Shed. |
| 42 | Lord Shiva Theme Park |
| 43 | Coconut Shop |
| 44 | Fencing Wall |
| 45 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 46 | Bhajan Mandap Near Temple |
| 47 | Temple Mukhasala & Kitchen |
| 48 | Dipa Ghara |
| 49 | Covering of Open to Sky area around Temple Cave |
| 50 | Mundan Pindi and Ganesh Temple. |
| 51 | Lord Shiva Statue Base |
| 52 | Drainage System |
| 53 | Water Cascade |
| 54 | Sculptures & Murals |
| 55 | Tensile Structure Near Temple Entrance |
| 56 | Watch Tower near Ghat |
| 57 | Pathway to Caves |
| 58 | Seating Benches |
| 59 | Construction of granular sub-base by providing close graded granular sub base Grading-ivmaterial as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, & compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT & H Specifications for Road & Bridge works (4th Revision).Parking, Pathway & Paving |
| 60 | Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6\\") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.Drainage System |
| 61 | Pathway to Caves |
| 62 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge. Parking, Pathway & Paving |
| 63 | Bol-Bom Rest Shed. |
| 64 | Renovation of Existing Toilet and Drinking water Fountain |
| 65 | Lord Shiva Theme Park |
| 66 | Coconut Shop |
| 67 | Fencing Wall |
| 68 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 69 | Bhajan Mandap Near Temple |
| 70 | Temple Mukhasala & Kitchen |
| 71 | Dipa Ghara |
| 72 | Covering of Open to Sky area around Temple Cave |
| 73 | Mundan Pindi and Ganesh Temple. |
| 74 | Lord Shiva Statue Base |
| 75 | Water Cascade |
| 76 | Sculptures & Murals |
| 77 | Tensile Structure Near Temple Entrance |
| 78 | Watch Tower near Ghat |
| 79 | Seating Benches |
| 80 | Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.Bol-Bom Rest Shed. |
| 81 | Bhajan Mandap Near Temple |
| 82 | Temple Mukhasala & Kitchen |
| 83 | Dipa Ghara |
| 84 | Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.Bol-Bom Rest Shed. |
| 85 | Coconut Shop |
| 86 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 87 | Bhajan Mandap Near Temple |
| 88 | Temple Mukhasala & Kitchen |
| 89 | Dipa Ghara |
| 90 | Mundan Pindi and Ganesh Temple. |
| 91 | Lord Shiva Statue Base |
| 92 | Watch Tower near Ghat |
| 93 | Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.Bol-Bom Rest Shed. |
| 94 | Renovation of Existing Toilet and Drinking water Fountain |
| 95 | Bhajan Mandap Near Temple |
| 96 | Temple Mukhasala & Kitchen |
| 97 | Dipa Ghara |
| 98 | Mundan Pindi and Ganesh Temple. |
| 99 | Watch Tower near GhatGround Floor |
| 100 | First Floor |
| 101 | Second Floor |
| 102 | Third Floor |
| 103 | Coconut Shop |
| 104 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 105 | Random Rubble H.G. stone masonry in cm (1:6) in foundation & plinth using H.G. stones of approved quality, including splays, cuttings, circular moldings, watering, curing, cost, conveyance, taxes, royalties of all materials & labour,labour cess with T&P etc. complete in all respect as directed by the Engineer-in-charge.Fencing Wall |
| 106 | Pathway to Caves |
| 107 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.FOOTING BASEBol-Bom Rest Shed. |
| 108 | Lord Shiva Theme Park |
| 109 | Coconut Shop |
| 110 | Fencing Wall |
| 111 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 112 | Bhajan Mandap Near Temple |
| 113 | Temple Mukhasala & Kitchen |
| 114 | Dipa Ghara |
| 115 | Covering of Open to Sky area around Temple Cave |
| 116 | Mundan Pindi and Ganesh Temple. |
| 117 | Drainage System |
| 118 | Water Cascade |
| 119 | Sculptures & Murals |
| 120 | Tensile Structure Near Temple Entrance |
| 121 | Watch Tower near Ghat |
| 122 | COLUMN : Ground FloorBol-Bom Rest Shed. |
| 123 | Lord Shiva Theme Park |
| 124 | Coconut Shop |
| 125 | Fencing Wall |
| 126 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 127 | Bhajan Mandap Near Temple |
| 128 | Temple Mukhasala & Kitchen |
| 129 | Dipa Ghara |
| 130 | Sculptures & Murals |
| 131 | Tensile Structure Near Temple Entrance |
| 132 | Watch Tower near GhatGround Floor |
| 133 | First Floor |
| 134 | Second Floor |
| 135 | Third Floor |
| 136 | PLINTH BEAMBol-Bom Rest Shed. |
| 137 | Lord Shiva Theme Park |
| 138 | Coconut Shop |
| 139 | Fencing Wall |
| 140 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 141 | Bhajan Mandap Near Temple |
| 142 | Temple Mukhasala & Kitchen |
| 143 | Dipa Ghara |
| 144 | Sculptures & Murals |
| 145 | Tensile Structure Near Temple Entrance |
| 146 | Watch Tower near Ghat |
| 147 | LINTEL BEAMBol-Bom Rest Shed. |
| 148 | Coconut Shop |
| 149 | Bhajan Mandap Near Temple |
| 150 | Temple Mukhasala & Kitchen |
| 151 | CHAJJABol-Bom Rest Shed. |
| 152 | Coconut Shop |
| 153 | Bhajan Mandap Near Temple |
| 154 | Temple Mukhasala & Kitchen |
| 155 | ROOF BEAM : Ground FloorBol-Bom Rest Shed. |
| 156 | Lord Shiva Theme Park |
| 157 | Coconut Shop |
| 158 | Fencing Wall |
| 159 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 160 | Bhajan Mandap Near Temple |
| 161 | Temple Mukhasala & Kitchen |
| 162 | Dipa Ghara |
| 163 | Sculptures & Murals |
| 164 | Watch Tower near GhatGround Floor |
| 165 | First Floor |
| 166 | Second Floor |
| 167 | Third Floor |
| 168 | ROOF SLAB :- Ground FloorLord Shiva Theme Park |
| 169 | Coconut Shop |
| 170 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 171 | Bhajan Mandap Near Temple |
| 172 | Temple Mukhasala & Kitchen |
| 173 | Dipa Ghara |
| 174 | Sculptures & Murals |
| 175 | Watch Tower near GhatGround Floor |
| 176 | First Floor |
| 177 | Second Floor |
| 178 | Third Floor |
| 179 | STAIRCASEWatch Tower near GhatGround Floor |
| 180 | First Floor |
| 181 | Second Floor |
| 182 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding, wastage & over lapping and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.Ground FloorBol-Bom Rest Shed. |
| 183 | Lord Shiva Theme Park |
| 184 | Coconut Shop |
| 185 | Fencing Wall |
| 186 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 187 | Bhajan Mandap Near Temple |
| 188 | Temple Mukhasala & Kitchen |
| 189 | Dipa Ghara |
| 190 | Covering of Open to Sky area around Temple Cave |
| 191 | Mundan Pindi and Ganesh Temple. |
| 192 | Drainage System |
| 193 | Water Cascade |
| 194 | Sculptures & Murals |
| 195 | Tensile Structure Near Temple Entrance |
| 196 | Watch Tower near GhatGround Floor |
| 197 | First Floor |
| 198 | Second Floor |
| 199 | Third Floor |
| 200 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground FloorBol-Bom Rest Shed. |
| 201 | Renovation of Existing Toilet and Drinking water Fountain |
| 202 | Lord Shiva Theme Park |
| 203 | Coconut Shop |
| 204 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 205 | Bhajan Mandap Near Temple |
| 206 | Temple Mukhasala & Kitchen |
| 207 | Dipa Ghara |
| 208 | Mundan Pindi and Ganesh Temple. |
| 209 | Lord Shiva Statue Base |
| 210 | Drainage System |
| 211 | Sculptures & Murals |
| 212 | Watch Tower near GhatGround Floor |
| 213 | First Floor |
| 214 | Second Floor |
| 215 | Third Floor |
| 216 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Bol-Bom Rest Shed. |
| 217 | Renovation of Existing Toilet and Drinking water Fountain |
| 218 | Lord Shiva Theme Park |
| 219 | Coconut Shop |
| 220 | Fencing Wall |
| 221 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 222 | Bhajan Mandap Near Temple |
| 223 | Temple Mukhasala & Kitchen |
| 224 | Dipa Ghara |
| 225 | Sculptures & Murals |
| 226 | Tensile Structure Near Temple Entrance |
| 227 | Watch Tower near GhatGround Floor |
| 228 | First Floor |
| 229 | Second Floor |
| 230 | Third Floor |
| 231 | Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Bol-Bom Rest Shed. |
| 232 | Renovation of Existing Toilet and Drinking water Fountain |
| 233 | Lord Shiva Theme Park |
| 234 | Coconut Shop |
| 235 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 236 | Bhajan Mandap Near Temple |
| 237 | Temple Mukhasala & Kitchen |
| 238 | Dipa Ghara |
| 239 | Water Cascade |
| 240 | Sculptures & Murals |
| 241 | Watch Tower near GhatGround Floor |
| 242 | First Floor |
| 243 | Second Floor |
| 244 | Third Floor |
| 245 | Supplying, fitting and fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON / RAK/ KAJARIA/ Somany) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.Bol-Bom Rest Shed. |
| 246 | Bhajan Mandap Near Temple |
| 247 | Temple Mukhasala & Kitchen |
| 248 | Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /RAK/ SOMANY/ KAJARIA) as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects as directed by the Engineer in charge.Bol-Bom Rest Shed. |
| 249 | Bhajan Mandap Near Temple |
| 250 | Temple Mukhasala & Kitchen |
| 251 | Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.Bol-Bom Rest Shed. |
| 252 | Renovation of Existing Toilet and Drinking water Fountain |
| 253 | Coconut Shop |
| 254 | Bhajan Mandap Near Temple |
| 255 | Temple Mukhasala & Kitchen |
| 256 | Mundan Pindi and Ganesh Temple. |
| 257 | Lord Shiva Statue Base |
| 258 | Watch Tower near Ghat |
| 259 | Pathway to Caves |
| 260 | Watch Tower near GhatFirst Floor |
| 261 | Second Floor |
| 262 | Fixing granite tiles of approved dimension area above 0.4 sqm (10mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.Bol-Bom Rest Shed. |
| 263 | Coconut Shop |
| 264 | Bhajan Mandap Near Temple |
| 265 | Temple Mukhasala & Kitchen |
| 266 | Stepped Entry to main Temple |
| 267 | Mundan Pindi and Ganesh Temple. |
| 268 | Lord Shiva Statue Base |
| 269 | Water Cascade |
| 270 | Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.(Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge).Bol-Bom Rest Shed. |
| 271 | Renovation of Existing Toilet and Drinking water Fountain |
| 272 | Coconut Shop |
| 273 | Fencing Wall |
| 274 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 275 | Bhajan Mandap Near Temple |
| 276 | Temple Mukhasala & Kitchen |
| 277 | Dipa Ghara |
| 278 | Mundan Pindi and Ganesh Temple. |
| 279 | Lord Shiva Statue Base |
| 280 | Tensile Structure Near Temple Entrance |
| 281 | External Cladding to Existing Changing room |
| 282 | Watch Tower near GhatGround Floor |
| 283 | First Floor |
| 284 | Second Floor |
| 285 | Third Floor |
| 286 | Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.(Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge).Bol-Bom Rest Shed. |
| 287 | Renovation of Existing Toilet and Drinking water Fountain |
| 288 | Coconut Shop |
| 289 | Fencing Wall |
| 290 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 291 | Bhajan Mandap Near Temple |
| 292 | Temple Mukhasala & Kitchen |
| 293 | Dipa Ghara |
| 294 | Mundan Pindi and Ganesh Temple. |
| 295 | Lord Shiva Statue Base |
| 296 | Tensile Structure Near Temple Entrance |
| 297 | External Cladding to Existing Changing room |
| 298 | Watch Tower near GhatGround Floor |
| 299 | First Floor |
| 300 | Second Floort |
| 301 | Third Floor |
| 302 | Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Bol-Bom Rest Shed. |
| 303 | Renovation of Existing Toilet and Drinking water Fountain |
| 304 | Coconut Shop |
| 305 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 306 | Bhajan Mandap Near Temple |
| 307 | Temple Mukhasala & Kitchen |
| 308 | Dipa Ghara |
| 309 | Mundan Pindi and Ganesh Temple. |
| 310 | Lord Shiva Statue Base |
| 311 | External Cladding to Existing Changing room |
| 312 | Watch Tower near GhatGround Floor |
| 313 | First Floor |
| 314 | Second Floor |
| 315 | Third Floor |
| 316 | Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.(Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge).Bol-Bom Rest Shed. |
| 317 | Renovation of Existing Toilet and Drinking water Fountain |
| 318 | Coconut Shop |
| 319 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 320 | Bhajan Mandap Near Temple |
| 321 | Temple Mukhasala & Kitchen |
| 322 | External Cladding to Existing Changing room |
| 323 | Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost,conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge .Bol-Bom Rest Shed. |
| 324 | Renovation of Existing Toilet and Drinking water Fountain |
| 325 | Mundan Pindi and Ganesh Temple. |
| 326 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.Bol-Bom Rest Shed. |
| 327 | Renovation of Existing Toilet and Drinking water Fountain |
| 328 | Teak Wood Panelled Door :- Providing and fixing 80 mm thick Modular & ornamental panelled door shutter for Temple door, fixing with all Brass Hardware fittings (excluding door closer) of required size with necessary screws, etc. all complete as per direction of Engineer-in-charge.Mundan Pindi and Ganesh Temple. |
| 329 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc.complete as per the instruction of Engineer-in-Charge.(Make-FENESTA/ Koemmerling/ Saint Gobain/ Prominance)Bol-Bom Rest Shed. |
| 330 | Renovation of Existing Toilet and Drinking water Fountain |
| 331 | Providing and fixing factory made uPVC white colour sliding glazed Ventilator 0.60mtr in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.(Make-FENESTA/ Koemmerling/ Saint Gobain/ Prominance)Renovation of Existing Toilet and Drinking water Fountain |
| 332 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.Bol-Bom Rest Shed. |
| 333 | Renovation of Existing Toilet and Drinking water Fountain |
| 334 | Fencing Wall |
| 335 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 336 | Bhajan Mandap Near Temple |
| 337 | Temple Mukhasala & Kitchen |
| 338 | Dipa Ghara |
| 339 | Stepped Entry to main Temple |
| 340 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).Fencing Wall |
| 341 | Stepped Entry to main Temple |
| 342 | Providing, Transporting, Fabricating and Fixing in position, MS Frame Structure of Square Hollow tube, Rectangulat Hollow Tube, Circulat Tube, Angles, Channels in Roof and Walls etc. Complete as per requirement and direction of Engineer-in-charge.Bol-Bom Rest Shed. |
| 343 | Covering of Open to Sky area around Temple Cave |
| 344 | Stepped Entry to main Temple |
| 345 | Supply & Fixing Rolling Shutters of with made of required Size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, on design pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing nacassary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength (IS : 4454 - part 1 & M.S. top cover of required thickness for rolling shutters and approved ball bearing). Coconut Shop |
| 346 | Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete as per requirement and direction of Engineer-in-charge.Parking, Pathway & Paving |
| 347 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. (Make-JINDAL )Renovation of Existing Toilet and Drinking water Fountain |
| 348 | Stepped Entry to main Temple |
| 349 | Pathway to Caves |
| 350 | Painting two coat with approved synthetic enamel paint to new wood/ iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.(Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge).Parking, Pathway & Paving |
| 351 | Bol-Bom Rest Shed. |
| 352 | Renovation of Existing Toilet and Drinking water Fountain |
| 353 | Coconut Shop |
| 354 | Fencing Wall |
| 355 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 356 | Bhajan Mandap Near Temple |
| 357 | Temple Mukhasala & Kitchen |
| 358 | Dipa Ghara |
| 359 | Stepped Entry to main Temple |
| 360 | Mundan Pindi and Ganesh Temple. |
| 361 | External Cladding to Existing Changing room |
| 362 | Providing & fixing Glass Fibre Reinforced concrete (GFRC) Jally of minimum thickness of 25mm & Minimum border thickness of 50mm above the Boundary wall as per manufacturer's specification along with fixing accessories & pink sand stone finished texture etc. all complete as per directions of Engineer-in-charge.Fencing Wall |
| 363 | Glass Roofing : (6+6+1.5)mm Toughtened Double Layer Laminated Glass RoofingCovering of Open to Sky area around Temple Cave |
| 364 | METAL ROOFING :-Supplying and fixing of non-insulated Colour Coated galvalume metal sheets (Zinc aluminium alloy Coated. Not less than 150gms/sq.m. Having high tensile steel sheet (FY 550 Mpa) of 0.5 mm minimum thickness (BMT). The outside face (exposed face) shall be permanently colour coated with PVF-2 paint of minimum DFT 20 microns over primer and inner side (Internal face) shall be coated with same paint of minimum DFT 12 microns with all fasteners and fixtures. Scaffolding etc. Complete at all heights as per drawings and specification including preparation of bill of materials and shop drawings. (Galvalume sheets shall be of any reputed make ‘Tata Blue Scope Steel Limited’ Or equivalent.Bol-Bom Rest Shed. |
| 365 | Providing & Fixing Best Artificial thatched roofing 22.5cm in and 15cm top layers including split match Frame jaffry on top per 1 sqm.Bol-Bom Rest Shed. |
| 366 | Stepped Entry to main Temple |
| 367 | Teracota tile Roofing with Steel Frame Structure.Stepped Entry to main Temple |
| 368 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with storng vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick sand filling.as per drawing, specification and direction of Engineer-In-charge. Parking, Pathway & Paving |
| 369 | Sand Stone/Khandolite stone/ granite stone sculptures/Murals/Decorative pieces of required shape & sizes, in all heights & floors, for foundation/ Superstructure/ Clading/ Flooring/Skirting works as given below, inlcuding all necessary materials like Stone , M.S. clamps, dowels, Chemicals for fixing, Grout materials, cement mortar etc all complete with propoer grouting ,rubbing,grinding and finishing as per approved drawings, specifications and directions of the Engineer-In-Charge/Architect ( ( The Agency should take approval of the stone and the final sketch of the work to be executed in accordance with the drawings and specifications provided, from the concerned Architect & Engineer-in-charge))Dressed Sand Stone Carved Pieces in required sizes of Minimum Thickness of 150mm with carving work upto a depth of 100mm,Lord Shiva Theme Park |
| 370 | Bhajan Mandap Near Temple |
| 371 | Temple Mukhasala & Kitchen |
| 372 | Dipa Ghara |
| 373 | Mundan Pindi and Ganesh Temple. |
| 374 | Lord Shiva Statue Base |
| 375 | Sculptures & Murals |
| 376 | Providing and fixing 150mm thick Sand stone Skirting & Cladding (sample of Sand stone should be approved by Engineer-In-Charge) for wall surface and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc.with Chemical Adhesive(H40 Gel Kerakoll or equivalent) and jointing with coloured Chemical Grout (Fugabella-2- 12/0-5 kerakoll or equivalent ) including pointing (if required) pigment of matching shade, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. Lord Shiva Theme Park |
| 377 | Coconut Shop |
| 378 | Bhajan Mandap Near Temple |
| 379 | Temple Mukhasala & Kitchen |
| 380 | Dipa Ghara |
| 381 | Mundan Pindi and Ganesh Temple. |
| 382 | Sculptures & Murals |
| 383 | Dressed Sand Stone Carved Pieces in required sizes of Minimum Thickness of 75 mm with carving work upto a depth of 50m. Lord Shiva Theme Park |
| 384 | Bhajan Mandap Near Temple |
| 385 | Temple Mukhasala & Kitchen |
| 386 | Mundan Pindi and Ganesh Temple. |
| 387 | Sculptures & Murals |
| 388 | Dressed Sand Stone Carved Pieces in required sizes of Minimum Thickness of 50 mm with carving work upto a depth of 25mm. Lord Shiva Theme Park |
| 389 | Mundan Pindi and Ganesh Temple. |
| 390 | Sculptures & Murals |
| 391 | Seating Benches |
| 392 | Moulding work over Dressed Sand stone Plane Pieces in required sizes of Minimum Thickness of 50 mm with Moulding as given in reference drawing but Excluding cost of stone. Lord Shiva Theme Park |
| 393 | Mundan Pindi and Ganesh Temple. |
| 394 | Sculptures & Murals |
| 395 | Moulding work over Dressed Sand stone Plane Pieces in required sizes of Minimum Thickness of 75 mm with Moulding as given in reference drawing but Excluding cost of stone. Lord Shiva Theme Park |
| 396 | Bhajan Mandap Near Temple |
| 397 | Temple Mukhasala & Kitchen |
| 398 | Mundan Pindi and Ganesh Temple. |
| 399 | Lord Shiva Statue Base |
| 400 | Sculptures & Murals |
| 401 | Moulding work over Dressed Sand stone Plane Pieces in required sizes of Minimum Thickness of 100 mm with Moulding as given in reference drawing but Excluding cost of stone. Lord Shiva Theme Park |
| 402 | Mundan Pindi and Ganesh Temple. |
| 403 | Sculptures & Murals |
| 404 | Moulding work over Dressed Sand stone Plane Pieces in required sizes of Minimum Thickness of 150 mm with Moulding as given in reference drawing but Excluding cost of stone. Bhajan Mandap Near Temple |
| 405 | Temple Mukhasala & Kitchen |
| 406 | Dipa Ghara |
| 407 | Granite/Sand Stone /Khandolite Sculpture/Statue of Height up to 1.5-2.5(H)-1.0(D)-2.0-3.0(L) Mtr, Approved Design Art of Template, and to be fixed from FL. Lord Shiva Theme Park |
| 408 | Sculptures & Murals |
| 409 | Granite/Sand Stone /Khandolite Sculpture/Statue of Height up to 1.5(H) -1.0 (D)-2.0 (L) Mtr, Approved Design Art of Template, and to be fixed from FL. Lord Shiva Theme Park |
| 410 | Sculptures & Murals |
| 411 | Providing and fixing Khandolite stone decorative Elephants Head Hand wash point as per architectural drawing with carving depth and size as specified in drawing or as directed by Project Architect including fixing the same etc. all complete. Shoe Stand, Drinking water, Hand & Foot wash. |
| 412 | Khandolite stone decorative MASTAKA as per architectural drawing with carving depth and size of 0.900mtr O/D & 0.750 mtr. Height as specified in drawing or as directed by Project Architect including fixing the same etc. all complete. Dipa Ghara |
| 413 | Providing and fixing Khandolite stone decorative motiffs as per architectural drawing with carving depth and size as specified in drawing or as directed by Project Architect including fixing the same etc. all complete. Dipa Ghara |
| 414 | Providing and fixing neatly finished Best quality Decorative Khandolite stone pieces of required shape & sizes, in all heights & Seating benches for foundation/ Superstructure etc. works as given below, inlcuding all necessary materials like Stone, M.S. clamps, dowels, Chemicals for fixing, Grout materials, cement mortar etc all complete with propoer grouting, rubbing, grinding and finishing as per approved drawings, specifications and directions of the Engineer-In-Charge/Architect (The Agency should take approval of the stone and the final sketch of the work to be executed in accordance with the drawings and specifications provided, from the concerned Architect & Engineer-in-charge) in all floor & all Height including all complete as per direction of Engineer-in-charge. |
| 415 | Providing and fixing 50mm thick Sand stone flooring (sample of Sand stone should be approved by Engineer-In-Charge) for Shop and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. Dipa Ghara |
| 416 | Providing and fixing 25mm thick Sand stone flooring (sample of Sand stone should be approved by Engineer-In-Charge) for Shop and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. Coconut Shop |
| 417 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 418 | Providing and fixing 25mm thick Sand stone Skirting & Cladding (sample of Sand stone should be approved by Engineer-In-Charge) for wall surface and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc.with Chemical Adhesive (H40 Gel Kerakoll or equivalent) and jointing with coloured Chemical Grout (Fugabella-2- 12/0-5 kerakoll or equivalent) including pointing (if required) pigment of matching shade, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. Renovation of Existing Toilet and Drinking water Fountain |
| 419 | Lord Shiva Theme Park |
| 420 | Coconut Shop |
| 421 | Shoe Stand, Drinking water, Hand & Foot wash. |
| 422 | Bhajan Mandap Near Temple |
| 423 | Temple Mukhasala & Kitchen |
| 424 | Dipa Ghara |
| 425 | Sculptures & Murals |
| 426 | External Cladding to Existing Changing room |
| 427 | Providing and fixing Best quality Sand stone Carved Pieces in required sizes of Minimum Thickness of 50mm with carving, Moulding work upto a depth of 25 mm, as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. (The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge). Renovation of Existing Toilet and Drinking water Fountain |
| 428 | External Cladding to Existing Changing room |
| 429 | Providing and fixing Best quality 75mm thick Sand stone Jalli Pieces of approved design/Pattern by Architect & EIC as given below, neatly carved and finished inlcuding all necessary M.S. clamps, dowels etc. all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including all Cost of Material, Labour, Conveyance etc. complete. Watch Tower near Ghat |
| 430 | Providing and fixing 40mm thick Flamed Finished Granite stone flooring (sample of Granite stone should be approved by Engineer-In-Charge) for stair case trade, riser and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. Seating Benches |
| 431 | Providing and fixing Best quality Sand stone Plane Pieces in required sizes of Minimum Thickness of 50mm with Moulding as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. (The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge). Renovation of Existing Toilet and Drinking water Fountain |
| 432 | Watch Tower near Ghat |
| 433 | Electro-mechanical Boom Barrier- Providing & fixing boom length 2m to 8 m (customizable), boom material Aluminum alloy, powder coated, boom type- straight, floor-mounted cabinet, motor-DC brushless motor, typical rating-100w-200w, Drive mechanism-electro-mechanical/Hydrolic, Duty cycle-Continuous (24X7 operation for high trafic), opening/Closing time-1.5 sec to 6 sec, operation temperature-20C to +70C, control operation- Remote control, push bottom. Boom Barrier |
| 434 | Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2(1cement:2sand:2graded stone aggregate of 6 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor. Coconut Shop |
| 435 | External Cladding to Existing Changing room |
| 436 | Supplying, Installing, Testing & Commissioning of Water Fountain System as per the direction of EIC and As per the specifications : Stainless Steel Water Blades of supremepools 14 nos,with Colour change lights of Supremepools 14 nos, RGB Controller require capacity, Required submersible pump required capacity of Kirloskar/ Equivalent ,Controlling Valves accessories in complete of Harit/ AVN /Equi ; Controller Panel for electrical work; Amplifier for require capacity; Pump Starter and other supporting accessories , Wires For Lights & Pumps, Plumbing materials etc for with control valves and Nrv for the system job ; Final Installation & Commissioning. Water Cascade |
| 437 | FRP DUSTBIN:- Capacity 100 Ltr, Size-4' Height & 65\\" Dia, Material- FRP. Model No- FGU-13. Dustbin & Signages |
| 438 | FRP DUSTBIN:- Capacity 80 Ltr, Size-4' Height & 65\\" Dia, Material- FRP. Model No- FGU-14. Dustbin & Signages |
| 439 | FRP DUSTBIN :- Capacity 120 Ltr, Size-4' Height & 75mm Dia, Material- FRP. Model No- FGU-15Dustbin & Signages |
| 440 | FRP DUSTBIN :- Capacity 120 Ltr, Size-4' Height & 100mm Dia, Material- FRP. Model No- FGU-16. Dustbin & Signages |
| 441 | STAINLESS Steel 3D LETTERS : Design, Composition, Supply & Installation of building facade LOGO &\\"PROJECT NAME\\" for building facade, signage letters of Stainless Steel 304 graded 18swg laser sheet cut fabricated letters for text: as per requirement & design, with 25mm lipping in 22swg Stainless steel sheet 304, Polyurethane Coating (PU Coated) in color specified, with concealed lighting behind the letters in White LED Modules of Samsung / Philips make in 0.72 watts, with requisite Power supply of Meanwel branded with 2 years warranty, along with Breaker and Legrand / L&T timer, to be mounted on Syntax junction box to be fixed near sign location; Power should be provided near sign locations; all wiring has to be concealed and should not be visible, all fixtures should be in Stainless Steel / aluminium, concealed behind the letters. Dustbin & Signages |
| 442 | External Direction Signage: Design, Composition, Supply & Installation of single sided non-lit External Multi Directional Signage structural steel frame made out of medium duty 50mm square pipe section, gusset plate 6mm thick and two base plates of size 400X400X10mm, red oxide primer with two coat of synthetic enamel painting, fixing of base plate to foundation through anchor bolt , providing & fixing ACP Sheet 3mm in cladding, 3M (3630/3650 series) Vinyl of background with High Intensity Prismatic (HIP) reflective sheet, selfadhesive graphics with 3M Scotchcal and mounting with 3M approved tensioning system etc. complete as per drawing and specification. Dustbin & Signages |
| 443 | Design, Composition, Supply & Installation of double sided non-lit External Multi Directional Signage with pole of 72x72x2.5mm, structural steel frame made out of medium duty, 50mm & 25mm square pipe section and base plate 300X300X10mm, red oxide primer with two coat of smoke grey shade epoxy painting, fixing of base plate to foundation through anchor bolt, providing & fixing ACP Sheet 3mm in cladding, 3M Vinyl of background with High Intensity Prismatic (HIP) reflective sheet, self-adhesive graphics with 3M Scotchcal and mounting with 3M double sided VHB Tape etc. complete as per drawing and specification. Dustbin & Signages |
| 444 | FRP Signages : Designing, Composition, Supply, Casting, Transporting and Installation of FRP Signages of Minimum thickness 2mm with approved texture, colour, shape and size etc. with required Hardware fittings/SS Chain as and where required including placing in suitable position etc. complete as per directions of Engineer-in-charge or as directed by Project Architect.Dustbin & Signages |
| 445 | Covered Sitout :- Design, supply fabrication, delivery and erection of Tensile fabric roofing excluding foundation, including steel support framework tensioning hardware and final finishing with epoxy paint etc complete including cost of materials, labours. Membrane Specifications as under : (Serge Ferrari, France) Both side PVDF coat Technical Properties : (5% variation acceptable) Yarn : 1150 dtexPESHT CR treatment Weight : 950 g/sqm Width : 267 cm-105 inch Tensile Strength : 3000/2800N/5CM (WRAP * WEFT) Tear Resistances : 300N (WRAP * WEFT) Adhesion : 120N/5CM Surface Treatment : Formula weldable fluorinated varnish Light Transmission : 13.50% Flame Retardency : M2/NFP92-507CSFMT119, B1/DIN4102 Manufacturer's Guarantee : 15 years. Tensile Structure Near Temple Entrance. |
| 446 | Earth work in Ordinary soil for small trees with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth of size 0.2x0.2x0.2 m. @ 138.71/cum and the Earth transported by transport vehicles as directed by the Engineer-in-charge. Lord Shiva Theme Park |
| 447 | Earth work in Ordinary soil for big trees with initial lead and lift including rough dressing in layers not exceeding 1m in depth of size 0.60mx0.60mx0.75 m. @ 138.71/cum and the Earth transported by transport vehicles as directed by the Engineer-in-charge. Lord Shiva Theme Park |
| 448 | Filling pits with fertile soil/ silt including carriage up to each pit by tractor/ truck up to site and by head load up to pit. Pit size 0.2x0.2x0.2 m. Lord Shiva Theme Park |
| 449 | Filling pits with fertile soil/ silt including carriage up to each pit by tractor/ truck up to site and by head load up to pit. Pit size 0.60mx0.60mx0.75 m. Lord Shiva Theme Park |
| 450 | Application of organic manure, (FYM/cimpost/sludge) Including carriage upto pit, By tractor/truck upto site and by head lord upto pit. Pit size 0.2x0.2x0.2 m. Lord Shiva Theme Park |
| 451 | Application of organic manure, (FYM/cimpost/sludge) Including carriage upto pit, By tractor/truck upto site and by head lord upto pit.. Pit size 0.60mx0.60mx0.75 m. Lord Shiva Theme Park |
| 452 | Application of chemical fertilisers npk and insecticited/termicide including cost of materials/carriage and cost of application. Pit size 0.20mtx 0.20mtx0.20mt @ 50gm of NPK and 10gm of termicides. Lord Shiva Theme Park |
| 453 | Application of chemical fertilisers npk and insecticited/termicide including cost of materials/carriage and cost of application.Pit size 1.00mtx 0.60X0.60X0.75 cum @ 50gm of NPK and 10gm of termicides. Lord Shiva Theme Park |
| 454 | Cost of planting including mixing of manure, fertilizer, pesticides and initial watering.For shrub category :Landscape |
| 455 | Cost of planting including mixing of manure, fertilizer, pesticides and initial watering.For tree category : Landscape |
| 456 | Supporting plants with stakes including cost of stakes : For shrub category |
| 457 | Supporting plants with stakes including cost of stakes : : For tree category |
| 458 | Replanting of Trees of by Uprooting and Digging Pits : For shrub category : Landscaping |
| 459 | Replanting of Trees of by Uprooting and Digging Pits : For tree category : Landscape |
| 460 | Supply, Filling, Spreading of Good earth, Garden Soil including cost of material, carriage, labour and cost of application. |
| 461 | Contingent expenditure including cost of ropes, implement,baskets, drums etc. |
| 462 | Cost of planting trees & palm including transportation upto site ( including Providing, Laying,loading, unloading, transportation, royalties, cost of all materials, labour, sundries, T&P, scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge) : Trees (size min 4'-5' ft height) : Hibiscus tiliaceus variegated |
| 463 | Cordia sebestena |
| 464 | Conocarpus lancifolius |
| 465 | Terminalia mantaly |
| 466 | Terminalia arjuna |
| 467 | Terminalia catappa |
| 468 | Pongamia pinnata |
| 469 | Lagerstroemia speciosa |
| 470 | Tabebuia rosea |
| 471 | Tabebuia chrysantha |
| 472 | Alstonia scholaris |
| 473 | Millingtonia hortensis |
| 474 | Pterospermum acerifolium |
| 475 | Cassia nodosa |
| 476 | Sterculia alata |
| 477 | Bombax ceiba |
| 478 | Spathodea campanulata |
| 479 | Bauhinia blackae |
| 480 | Azardirachta indica |
| 481 | Melia azardirach |
| 482 | Podocarpus macrophyllus |
| 483 | Plumeria alba |
| 484 | Plumeria Thai varieties |
| 485 | Michelia champaca |
| 486 | Albizia lebbeck |
| 487 | Arecanut palm |
| 488 | Raphis palm |
| 489 | Foxtail Palm |
| 490 | Arenga palm |
| 491 | Bottle palm |
| 492 | Veitchia golden |
| 493 | Kentia palm |
| 494 | Cost of planting shrubs including transportation upto site ( including Providing, Laying,loading, unloading, transportation, royalties, cost of all materials, labour, sundries, T&P, scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge) : Small Palms (size min 2'-3' ft height) : Bauhinia tomentosa |
| 495 | Bauhinia acuminata |
| 496 | Tecoma gaudichaudi |
| 497 | Calliandra haematocephala rubra |
| 498 | Calliandra haematocephala rosea |
| 499 | Calliandra brevipes |
| 500 | Limonia spectabilis variegated |
| 501 | Limonia spectabilis |
| 502 | Cassia biflora |
| 503 | Murraya exotica |
| 504 | Sanchezia nobilis |
| 505 | Eugenia myrtifolia |
| 506 | Nicodivia spp |
| 507 | Jatropha panduraefolia green |
| 508 | Jatropha panduraefolia variegated |
| 509 | Cerbera odollam |
| 510 | Ficus reginald |
| 511 | Ficus lyrata |
| 512 | Ficus panda |
| 513 | Loropetalum chinensis |
| 514 | Juniperus golden |
| 515 | Thuja compacta |
| 516 | Canna dwarf |
| 517 | Canna variegated |
| 518 | Heliconia psittacorum |
| 519 | Dianella spp |
| 520 | Hymenocallis lily |
| 521 | Crinum red lily |
| 522 | Pandanus yellow |
| 523 | Pandanus white variegated |
| 524 | Zephyranthes lily |
| 525 | Russelia juncea red |
| 526 | Russelia juncea yellow |
| 527 | Alpinia zerumbet |
| 528 | Malphigia golden |
| 529 | Malphigia green |
| 530 | Malphigia variegated |
| 531 | Dracaeana Mahatma red |
| 532 | Ixora Thai pink |
| 533 | Ixora Thai red |
| 534 | Ixora Thai yellow |
| 535 | Ixora Thai White |
| 536 | Plumbago capensis |
| 537 | Acalypha rosea |
| 538 | Alternathera spp red/yellow |
| 539 | Iresine herbestii |
| 540 | Cuphea hyssopifolia |
| 541 | Lantana sellowiana |
| 542 | Lantana depressa red/yellow |
| 543 | Ipomoea green |
| 544 | Ipomoea Purple |
| 545 | Serissa foetida |
| 546 | Monstera spp |
| 547 | Money plant large leaved |
| 548 | Mini tagar |
| 549 | Mini tagar variegated |
| 550 | Areca Palm |
| 551 | Allamanda dwarf |
| 552 | Graptophyllum spp |
| 553 | Eranthemum tricolor |
| 554 | Justicia variegated |
| 555 | Barleria cristata |
| 556 | Verbena perennial |
| 557 | Abelia variegated |
| 558 | Development of lawn : Clearance of site, excavation of around upto a depth of 30cm, removal of excavated materials to outside for dumping at suitable places. |
| 559 | Providing and laying Neelgiri /Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.Mexican grass |
| 560 | Providing and laying Neelgiri /Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. Broad leaf grass |
| 561 | E.I. WORKRecessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group-A |
| 562 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 563 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 564 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 02Nos 6Amp socket outlet and 6Amp Modular switches connection(modular type) (flame retradant type) with suitable size modular box & metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 565 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((flame retradant type)) with suitable size modular box & cover(flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 566 | SUBMAIN.Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit . (2X6+1X2.5) |
| 567 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI in recessed HMS FRLS PVC conduit of mentioned size Make AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit . (2X4+1X1.5) |
| 568 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 569 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI in recessed HMS FRLS PVC conduit of mentioned size Make AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5). |
| 570 | DISTRIBUTION BOARD .Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB ITUS as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 yearsSupply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) |
| 571 | Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 240 volts, MCB . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 1 years.. |
| 572 | Supplying and fixing 40 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 year |
| 573 | Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year |
| 574 | EARTHING Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. |
| 575 | Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 576 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required |
| 577 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 578 | Supply and fixing of 10 Watt LED BH Fitting.The luminaire should be Replacement Warranty will be 2 years (panasonic/ havells/ LT/ Bajaj/ Phillips/ Crompton/ Wipro) |
| 579 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 580 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(With fan Regulator compatible) |
| 581 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand (Myrius) /Schneider(Zencelo)/Panasonic(Vision) |
| 582 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 583 | P.H. WORKProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. : 20mm dia C-PVC pipe SDR-11 |
| 584 | 25mm dia C-PVC pipe SDR-11 |
| 585 | 32mm dia C-PVC pipe SDR-11 |
| 586 | 40 mm dia C-PVC pipe SDR-11 |
| 587 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. : 15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 588 | 15mm dia CP Bib cock (Con-CHR-047KN Jaquar make) |
| 589 | 15mm dia CP Long body Bib cock (Con-CHR-107KN Jaquar make) |
| 590 | 15mm dia CP two way bib cock (Jaquar)CON-041KN |
| 591 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565 |
| 592 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 593 | 25mm dia brass full way valve (Shakti make) |
| 594 | 32mm dia brass full way valve (Shakti make) |
| 595 | 40mm dia brass full way valve (Shakti make) |
| 596 | 15mm CP Extension piece |
| 597 | 125mm CP grating |
| 598 | 15mm size C.P. flange |
| 599 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge : 2000 liters capacity PVC water storage tank in FF |
| 600 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 601 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 602 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 603 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. : 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 604 | 75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 605 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 606 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 607 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 608 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 609 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 610 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 611 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 612 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 613 | 75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make) |
| 614 | 75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 615 | 75x75x75mm U-PVC double equal door Tee(Ori Plast/Finolex/Supreme Make) |
| 616 | 75mm U-PVC vent cowl(Ori Plast/Finolex/Supreme Make) |
| 617 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. : 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 618 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge : EWC(Matrix set)No.70002(P-18) |
| 619 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge : 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 620 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge : Under Counter basin(560x450)Hindware-No.10095 |
| 621 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge : 20mmx600mm long CP towel rail |
| 622 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge :Towel ring |
| 623 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge : CP soap holder |
| 624 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. : 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 625 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. : Large Size mirror (13x0.90x0.75)= |
| 626 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink(Parryware make) |
| 627 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal : Stall Urinal - Flat Back stall type magnum urinal |
| 628 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 629 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 630 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge : Ground Floor |
| 631 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx60cm |
| 632 | 20 mm thick Granite Tiles |
| 633 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 634 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 60cmx30cm |
| 635 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant as per direction of Engineer-in-charge. |
| 636 | Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification. of make Rajshri Plastiwood/ Alstone/ Aramstrong or euivalant as per direction of Engineer-in-charge. |
| 637 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge : Aqua guard pure Chill 80 PSS UV |
| 638 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge : 110mm dia u-pvc pipe alround concrete |
| 639 | 160mm dia u-pvc pipe alround concrete |
| 640 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 641 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. Man hole chamber size 910mmx910mmx910mm (18\\" RCC Cover ) |
| 642 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 643 | 2 no 50 Users Septic Tank : Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 644 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 645 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 646 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 647 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 648 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 649 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 650 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 651 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 23cmx111cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:6 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 652 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 653 | Supplying all materials,labour,T&P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 654 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 655 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 656 | 12,000 ltr capacity R.C.C. Under ground sump of in side size (3.00m x 2.00m x 2.10m) : Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 657 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 658 | Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC. |
| 659 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 660 | Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.RCC floor, roof slab chhaja up to 4.430 m height |
| 661 | Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. |
| 662 | Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site. |
| 663 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 664 | Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. |
| 665 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 666 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories : Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only : Drilling of 200mm dia bore : 00 mtr to 30mtr |
| 667 | 31 mtr to 50mtr |
| 668 | Drilling of 150mm dia bore : 51 mtr to above |
| 669 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. : Lowering of 200mm dia P.V.C casing pipes : 00 mtr to 50 mtrs |
| 670 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. : 200mm dia PVC (sch-80) pipe |
| 671 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 672 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge : By DTH Rig |
| 673 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:Rocky terrain with boulder formation for 300m depth |
| 674 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) : 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 675 | DOL Control panel |
| 676 | 40mm dia steel short piece |
| 677 | Well cap |
| 678 | 50mm size CI bracket |
| 679 | 2.50sqmm flat cable |
| 680 | 20mm dia rigid UPVC pipes |
| 681 | Steel rope with cover |
| 682 | Labour charges for lowering including transportation |
| 683 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge : 32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender