Tender For Provn/ Improvement Of Certain B&R Works At Signal Unit At Af Stn Gorakhpur.
Tender Value
42.63 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
13 days left
EMD
85300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn/ Improvement Of Certain B&R Works At Signal Unit At Af Stn Gorakhpur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | AMENDMENT TO BOQ | BOQ | 20-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF) Gorakhpur Name of Work: PROVN/ IMPROVEMENT OF CERTAIN B&R WORKS AT SIGNAL UNIT AT AF STN GORAKHPUR. Contract No.: GE(AF)/GKP/E-39 OF 2026-27 File No.9479/E8 Serial Page No.15 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of items Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth;and getting out any type of soil complete all as specified and directed |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm complete all as specified and directed. |
| 4 | Removing surplus excavate soil to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge |
| 5 | M&L for PCC 1:4:8 type D-2 (using 40mm stone aggregate) as in foundation filling mass concrete complete all as specified and directed |
| 6 | M & L for RCC 1:2:4 type B1 nominal mix (20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 7 | M & L for RCC 1:2:4 type B1 nominal mix (20mm graded stone aggregate) as in columns,pillar,piers,post and struts complete all as specified and directed. |
| 8 | M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) complete all as spcified and directed. |
| 9 | M&L mild steel TMT 6mm to 8mm dia as in striuups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified. |
| 10 | Use and waste formwork to side of concrete foundation,footing,bases of columns,rafts and raft beams,side and soffit of foundation and plinth beams flat,for rough finished surfaces of concrete complete all as spcified and directed. |
| 11 | Use and waste of formwork to side of pillars,columns and stanchions,square or rectangular,for rough finished surface of concrete complete all as spcified and directed. |
| 12 | S&F rolled mild steel Fe 410-W (GdeE- 250) quality-A in Roof trusses (framed), trussed, purlins,posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle,rectangular or square hollow section, channel, or flat sections) including distance pieces, cleats etc,complete all as spcified and directed. |
| 13 | S & F Rolled mild steel plates as in guesset plates, base pletes etc complete all as specified. |
| 14 | S& F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Dia of Bolt (11to 15mm) complete all as specified and directed. |
| 15 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an camouflage pattern colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 16 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any camouflage pattern colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks complete all as spcified and directed. |
| 17 | S&F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as spcified and directed. |
| 18 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 19 | Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 20 | M&L for rendering 15mm thick cement plaster in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for preparation of new external wall surfaces and applying two coat of exterior acrylic weather proof antifungal emulsion paint in approved camouflaged pattern combination of (two or more colour ) including necessary scaffolding wherever required by using mechanised euipments complete all as specified and as directed by Engr-in-Charge.Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted. |
| 22 | M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed. |
| 23 | M & L for prepartion of new plasterred surfaces of wall and applying two coat of oil bond distermper over a coat of over a coat alkali resistant primer including 2 mm thick wall care putty complete all specified and directed |
| 24 | M&L for preparation of existing external wall surfaces and applying two coat of exterior acrylic weather proof antifungal emulsion paint in approved camouflaged pattern combination of (two or more colour ) including necessary scaffolding wherever required by using mechanised euipments complete all as specified and as directed by Engr-in-Charge. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted. |
| 25 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed by Engineer-In-Charge. |
| 26 | M & L for cement concrete 1:2:4 type B1 using (20mm graded stone aggregate) as in hold fast fixing and the surface match with the old surface all as specified and directed |
| 27 | M&L 100mm thick PCC 1:2:4 type B-1 nominal mix using( 20mm graded stone aggregate ) as in hard standing surface finished even and smooth without using extra cement over including spike rolling to surface complete all as specified and directed |
| 28 | M&L 100mm thick cement concrete 1:4:8 type D2 using (40mm graded stone aggregate) as in sub base complete all as specified. |
| 29 | M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles.complete all as specified and directed |
| 30 | M&L for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L 75mm thick cement concrete 1:4:8 type D2 using (40mm graded stone aggregate) as in sub base complete all as specified. |
| 32 | M&L for screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as spcified and directed. |
| 33 | M&L coloured Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as spcified and directed. |
| 34 | M&L for 75mm thick cement concrete type C-2 1:3:6 using( 20 mm graded stone aggregate) as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement all as specified and directed. |
| 35 | M&L for providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed copings complete all as specified and directed. |
| 36 | S & F Framed work such as grills, gratings, etc.. with ends of bars framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Including chequered plate and hand rail , similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 37 | M&L for Joist, channel, angle,other section or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed. |
| 38 | M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed. |
| 39 | S&F 4mm dia galvanised hard drawn steel wire fabric, 50x50 mm square mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed. |
| 40 | M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:4) etc as directed . |
| 41 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed |
| 42 | M&L PCC 1:3:6 type C2 40mm graded stone aggregate as in fixing of fencing post and mass concrete complete all as specified and directed. |
| 43 | S & F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets incl all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed. |
| 44 | Supply only chain link MS galvanised fencing, any size or type of minimum dia 3.15 mm or above as directed. Note:- (Weight of chain link fencing shall be decided through a BOO) |
| 45 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc.complete all as specified and directed |
| 46 | S&F 610mm dia punched tape concertina coil (effective dia 550mm at strech length of coil 6m) with two handle and spikes at both end of coil with dovetail clips [18 SWG], incl razor wire [7 No], 6m length of each wire medium size, barbed length 20mm width 14mm, incl 51 pins, 128 nos of clips in each coil incl 230gm/ Sqm Zinc coating on core wire complete all as specified. |
| 47 | M&L for Dismantling boarding, any description, fixed with screws in any position complete all as specified and directed. |
| 48 | M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed |
| 49 | S&F for Laminated panel flooring including AET flexi panel 800 Grade,pedistal 300mm High, flexi strenger,screw and installation with Hardware complete all as specified and directed . |
| 50 | Taking down chawkhats or frame with shutter (without taking out shutter from the frame but exc 1.50 Sqm and n.exc 4 sqm each complete all as specified and directed. |
| 51 | Non fire Doors For General Applications - Powder Coated /Wood Finish:(a) M&L for Providing and Fixing of Hollow metal door at all levels . Pressed Galvanised steel Single /Double leaf to required sizes of approved make which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277 with or without View Glass.(b) Door frame shall be Single rebate profile of size 100 x 58 mm made out of 1.20 mm thick galvanised steel sheet (18 gauge). Frames should be Mitered and field assembled with self tabs.Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement slurry if recommended.(c) Door leaf shall be 46 mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22guage) minimum thick galvanised steel sheet. The internal construction of the door shall have reinforcements for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware. The edges should be interlocked with lock seam. For pair of doors, astragals will be provided as required. View Glass shall be 5mm thick and flush to the door shutters (Double Glazed) and shall be fixed with double adhesive tape & Silicon sealent.Louvers can also be provided on demand.(d) All doors and frames shall be finished with Pure Polyester Powder Coated to any RAL Shade / Wood Stained to withstand 300 hours of salt spray.(e)accessories: \\" x 3\\" x 3mm, 5 knuckles, 2 ball bearing stainless steel 304 grade hinges, conforming to BS EN1935, CE/UL marked w/c screws suitable for metal doors,Finish-SSS-03 Nos, Rack & pinion door closer FS8500 of size EN 3 by mouting position conforming to BS EN1154, with stad arm and with two independent closing & latching speed control, silever finish-01 nos,Mortice dead lock , 55mm backset, 72mm distance C-C, 20mm forend , 20mm double throw conforming to BS EN12209, CE marked with Strike plate, Square forend w/c screws in finish : SSS-01nos ,Europrofile Double Cylinder 35/35mm long, both side key, 5 pin tumblers,supplied with 3 keys . Certified EN1303. Finish:SNP - 1 No,ESCUTCHEON - 52mm diameter, 8mm depth escutcheon prepared for euro-profile cylinder with concealed fixings. Supplied with face fixings. Stainless Steel Grade 304, finish: SSS -01,250mm long, 19 dia Stainless steel 304, D-type pull handle with back to back fixing , finish : SSS-01 Make :NCL Buildtek Ltd. |
| 52 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 53 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 54 | S&F 5.5mm thick sheet frosted glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq. m in each pane complete all as specified and directed Total in Figures 23 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender