|
| 1 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 2 | All as per item No 01. above but exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed. |
| 3 | Taking down shutter exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed. |
| 4 | Resecuring or easing without taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 5 | M&L for refixing of old shutters of any description exc 1.00 sqm each and n exc 2.00 sqm complete all as specified and directed. |
| 6 | S&F tubular steel farmed work as in doors (as in ckowkats) for single door frames of 2.5mm thick size100 x 50mm including necessary fixing lugs, lock strike plate incl locking arrengemet hold fast, ( tubular steel130x65mm@ 5.33kg/Rm). complete all as specified and directed. |
| 7 | S&F tubular steel farmed work as in doors (as in ckowkats) for double door frames of 2.5mm thick size130 x 65 including necessary fixing lugs, lock strike plate incl locking arrengemet, hold fast, etc (tubular steel130x65mm@ 6.99kg/Rm) complete all as specified and directed. |
| 8 | S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2 ) complete all as specified and directed. |
| 9 | S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars (wire mesh shutter) dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2 ) complete all as specified and directed. |
| 10 | S&F steel ventilators with top hung shutter & glazing bars hinges, steel peg stay and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2 complete all as specified and directed. |
| 11 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including grill necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. including taking down of existing steel ventilator complete all as specified and directed. |
| 12 | S&F framed work such as guard bars, grills etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 13 | Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 (Gde E-165) including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed. |
| 14 | S&F Glazed or skeleton factory made door shutter, 30 mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge (without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified and directed. |
| 15 | S&F 30 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial side on both side ete complete all as specified and directed. |
| 16 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 17 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed. |
| 18 | M&L for Factory made WPC (Wood Polymer Composite) Single Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc |
| 19 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as per specified and directed. |
| 20 | S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5 mm thick single side prelam PVC sheet reinforced with mild steel square tube complete all as specified & directed. |
| 21 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 22 | S&F 150 mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 23 | S&F 150 mm longstainless steel handles, cast type, fixed complete all as specified and directed. |
| 24 | S&F 100 mm long stainless steel hinges type B-12 complete all as specified and directed. |
| 25 | S&F 300 mm stainless steel sliding bolt plate type ss bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed. |
| 26 | S&F in repair 300 mm stainless steel sliding bolt plate type ss bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed. |
| 27 | S&F 150 mm floor door stopper of stainless steel body and tongue,with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 28 | S&F in repair 150mm floor door stopper of stainless steel body and tongue, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 29 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm dia fixed with stainless steel wire staples complete all as specified and as directed. |
| 30 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples complete all as specified and as directed. |
| 31 | S & F in repair for 3 mm thick sheet glass ordinary quality and glazing with fixing of slicon in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 32 | Description all as per item No 31 before but figured glass,pin head type complete all as specified and directed. |
| 33 | S&F for 3 mm thick sheet glass ordinary quality and glazing with fixing of slicon in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 34 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc complete all as specified and directed. |
| 35 | S&F in repair Hasp and staple, safety type, stainless steel hinge pin including bolt to hinge plate and fixed with screws but of ss (Size of hasp and staple in 125mm) confirming to IS 363 complete all as specified and directed. |
| 36 | S&F in repair Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and all required frame as per site requirement. Material test certificate and authentication should be compulsory provided by the manufacturing company: For Kitchen Doors and Cabinets. Complete all as specified and directed. |
| 37 | S&F for 30mm witdth of flaps (when open) continuous (piano) stainlees steel hinges, complete all as specified and as directed. |
| 38 | S&F in repair 75 mm long stainless steel hinges type B-12 complete all as specified and directed. |
| 39 | S&F in repair 125mm long Stainless steel Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 40 | S&F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified & directed. |
| 41 | S&F 150 mm long brass handles, cast type polished bright complete all as specified and directed. |
| 42 | S&F 75 mm long brass handles, cast type polished bright complete all as specified and directed. |
| 43 | S&F in repairs dropery rod 25 mm dia with Stainless steel bright finish pipe both, side cups including fixing with steinless steel bracket with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed. |
| 44 | S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed. |
| 45 | S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed. |
| 46 | Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 47 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 48 | Dittto all as item no 27 above but except bricks complete all as specified and directed. Note:- Bricks obtained from item No 26 shall be reused after cleaning. |
| 49 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 50 | Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for kay, scrubbing down with water complete all as specified and directed. |
| 51 | M&L for 12 mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 52 | M&L for 15 mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface fair & smooth complete all as specified and directed. |
| 53 | M&L for rendering 10 mm thick in CM 1:3 on ceiling surface finished fair and smooth without using extra cement complete all as specified and directed. |
| 54 | M&L for two coats of OBD over a coat of average 2 mm thick birla putty on newly plastered surfaces complete all as specified and directed. |
| 55 | M&L for Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of primer complete all as specified & directed. |
| 56 | M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed. |
| 57 | S&F in repairs for 1.00mm thick mild steel black sheet as in steel door/gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and directed. |
| 58 | Dismantling of wrought iron of mild steel work of any description not otherwise poivided complete all as specified and directed. |
| 59 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 60 | S&F in repair 250 mm stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. Please Enable Macros to View BoQ information |
