Tender For Construction Of One No. Additional Class Room At Govt. High School, Haladia, Khordha
Tender Value
14.58 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
6 days left
EMD
14584
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of One No. Additional Class Room At Govt. High School, Haladia, Khordha
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in Hard Soil in foundation including inItial lead and 1.5 m. initial lift including rough dressing etc including cost, conveyance, royalty,taxes of all materials, etc complete as per the direction of the Engineer-in-charge. |
| 2 | Sand filling in foundation and plinth with approved river sand well watered and rammed. including cost, conveyance, royalty, taxes of all materials, etc complete as per the direction of the Engineer-in-charge. |
| 3 | Plain Cement Concrete (1:3:6) using 40 mm size H.G. metal ( crusher broken ) well rammed including cost, conveyance, royalty, taxes of all materials, etc complete as per the direction of the Engineer-in-charge. |
| 4 | Plain Cement Concrete (1:4:8) using 40 mm size H.G. metal ( crusher broken ) well rammed including cost, conveyance, royalty, taxes of all materials, etc complete as per the direction of the Engineer-in-charge. |
| 5 | Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth per cum. |
| 6 | Supper structure. (GF) |
| 7 | Supper structure (FF) |
| 8 | Rigid smooth centring for RCC works including false work and dismantling then after casting including floor cost of all materials complete in ground. (GF) (Beam) |
| 9 | Waist Slab staircase (GF) |
| 10 | Landing Staircase (GF) |
| 11 | Column / Beam (FF) |
| 12 | Lintel band |
| 13 | Chajja & Slab |
| 14 | Cement Concrete M20 using 20 mm and down size C.B. chips for R.C.C. works including hoisting and laying, etc completed as per the direction of the Engineer-in-charge. (Staircase & Beam) (GF) |
| 15 | Supper structure Column, beam, Lintel band, chajja & Slab. (FF) |
| 16 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. (GF) |
| 17 | Providing 20 mm thick grading plaster (1:4) with water proofing treatment over roof painting with 2 coats of water proofing polymer paint etc.(FF) |
| 18 | MS Panelled Door double leaved shutter with MS Frame. Over all size including frame:- 1980mm (H) x 1070mm (W) made out of the following materials conforming to relevant Indian Standard specification. Frame:-35x35x6mm MS angle, Shutter style:- Top & Bottom rail 25x25x3mm MS Angle. Door panel:- 1.0mm CR Sheet. Panel stiffener covering width of each leaf:- 19x5mm. MS Flat 3 nos. on each leaf. Hinges size:- 100mm 6nos. (3nos. On each side) bought out as per ISS Hold fast:- 35x35x6mm MS Angle 175mm length bifurcated at the tip 3 nos. on each side. Handle:- 19x5mm MS Flat fabricated 4nos. Aldrop 2 nos. bought out as per ISS. Tower bolt:- 2 nos. bought out as per ISS. |
| 19 | MS Panelled Window double leaved shutter with MS Frame & Grill. Over all size including frame:- 1220mm Height x 910mm Width made out of the following materials conforming to relevant Indian Standard specification. Frame:-35x35x6mm MS angle, Shutter style:- Top & Bottom rail 25x25x3mm MS Angle. Window panel:- 1.0mm CR Sheet. Panel stiffener covering width of each leaf:- 19x5mm. MS Flat 2 nos. on each leaf. Hinges size:- 100mm 4nos. (2nos. On each side) bought out as per ISS Hold fast:- 35x35x6mm MS Angle 100mm length bifurcated at the tip 2 nos. one each side. Handle:- 19x5mm MS Flat 2nos. fabricated (inside). Tower bolt:- 4 nos. bought out as per ISS. Horizontal Grills 12mm MS Round at 100mm spacing. |
| 20 | MS Grill made out of MS flat conforming to IS: 2062/2006. |
| 21 | Labour for fitting and fixing of M.S. Gates as per approved design including cost of all materials complete. (DOOR & WINDOWS) ISS. |
| 22 | 12mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. (GF) |
| 23 | 16mm thick plaster with cement mortar (1:6) over stone/brick masonry including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. (GF) |
| 24 | 6mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chipping and slurry treatment including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. (G.F) |
| 25 | 2.5 cm A.S. flooring with cement concrete (1:2:4) including punning using 12 mm to down graded chips H.G.including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. (GF) |
| 26 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. c/c and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 27 | Painting with enamel paint of approved quality and shade over surface with 2 coats over 1 coat of primer etc.(FF) |
| 28 | Priming 1 coat with any appproved wall Primer including cost of Primer. (G.F) |
| 29 | Wall painting two coats with Plastic emulsion Paint of approved shade on new work to give an even shade including cost of Plastic emulsion Paint. Per 1 Sqm. (FF) |
| 30 | Wall painting two coats with weather coat of approved shade on new work to give an even shade including cost of weather coat. (G.F) |
| 31 | F.F Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender