Tender For Construction Of Three Nos Additional Class Room & Intigrated Maths With Science Lab. At Govt. High School, Dumuduma Village, Bmc
Tender Value
63.57 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
8 days left
EMD
63571
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Three Nos Additional Class Room & Intigrated Maths With Science Lab. At Govt. High School, Dumuduma Village, Bmc
BOQ
| Sl. No. | Item Description |
| 1 | GROUND FLOOR Earth work in hard Soil in foundation including intial lead and 1.5 m. intial lift including rough dressing etcincluding cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge. |
| 2 | Sand filling in foundation and plinth with approved river sand well watered and rammed.including cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge. |
| 3 | Plain Cement Concrete (1:3:6) using 40 mm size H.G. metal ( crusser brocken ) well rammed including cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge. In Foundation |
| 4 | Flyash (10\\") brick work in cement mortar (1:6) using Flyash. bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge. (a) Foundation |
| 5 | (b) Super structure |
| 6 | Rigid smooth centering for RCC works including false work and dismantling then after casting including cost of all material (a) Col. Foundation |
| 7 | (b)Column Super Structure , beam |
| 8 | (c) St. case |
| 9 | (d) Lintel |
| 10 | (e) Chajja, slab |
| 11 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying. (a) Column foundation & Plinth |
| 12 | (b)Column super st. ,Beam, St. case, Lintel, Chajja & slab |
| 13 | Supplying, fitting and placing uncoated HYSD bar rainforcement complete as per Drawing and technical specifecation in Column Foundation,Plinth. Lintel, St. case, Beam, Chajja, Slab |
| 14 | MS panneled Door Double leaved shutter with MS frame Over all size including frame:- 1980mm(H)x1070mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. Door pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 3nos. on each leaf .Hinges size 100mm 6nos(3nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 175mm length bifurcated at the tip 3nos. on each side . Handle:- 19x5mm MS flat fabricated 4nos. aldrop 2nos. bought out as per ISS. Tower bolt:- 2nos bought out as per ISS. |
| 15 | MS panneled window double leaved shutter with MS frame and grill Over all size including frame:- 1220mm(H)x910mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. window pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 2nos. on each leaf .Hinges size 100mm 4nos(2nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 100mm length bifurcated at the tip 2nos. on each side . Handle:- 19x5mm MS flat fabricated 2nos. (inside). Tower bolt:-42nos bought out as per ISS.Horozontal grill:- 12mm MS round at 100mm spacing. |
| 16 | Labour for fitting and fixing MS Door/window/gate as per approved design . |
| 17 | 6 mm thick plaster with cement mortar (1:4) for plaster over R C C surfaces including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 18 | 12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 19 | 16 mm thick plaster with cement mortar (1:6) over stone/brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 20 | Plain Cement Concrete (1:4:8) using 40 mm size H.G. metal ( crusser brocken ) well rammed including cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge. In Foundation |
| 21 | Supplying,fitting & fixing vitrified tile in floors of size (600x600)mm coloured/printed series(homogenious) of approved make conforming to IS:13755 laid on 20 mmthick cement mortar(1:4) & filling joints with white cement of approved quality including cost of all materials,labour T & P etc required for the work all complete as per direction of Engineer-in-charge(For new work only) |
| 22 | Supplying,fitting & fixing vitrified industrial floor tile of primium grade having thickness 8mm to 10mm conforming to IS-4457 of size 3000mmx300mm laid on 20 mmthick cement mortar(1:4) & filling joints with white cement of approved quality including cost of all materials,labour T & P etc required for the work all complete as per direction of Engineer-in-charge |
| 23 | Painting with synthetic paint of approved quality and shade over surface with 2 coats over 1 coat of primer etc. |
| 24 | Priming One Coat with approved Primer On New Surface for weathercoat painting |
| 25 | Painting two coats Weather Coat paint over one coat of Primer |
| 26 | Finishing surface of wall with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete. |
| 27 | Priming One Coat with approved Primer on putty work for Plastic paint |
| 28 | Painting 2 coats to walls with Plastic emultion paint of approved shade including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 29 | FIRST FLOOR Flyash (10\\") brick work in cement mortar (1:6) using Flyash. bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge. Super st. |
| 30 | Rigid smooth centering for RCC works including false work and dismantling then after casting including cost of all material (a) Col. Super st & beam. |
| 31 | (b)Waist Slab |
| 32 | (c) Lintel |
| 33 | (d) Chajja & slab |
| 34 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying. Column ,beam , St. case, Lintel, Chajja, Slab |
| 35 | Supplying, fitting and placing uncoated HYSD bar rainforcement complete as per Drawing and technical specifecation (a) Column ,beam, St. case, Lintel, Chajja, Slab |
| 36 | MS panneled Door Double leaved shutter with MS frame Over all size including frame:- 1980mm(H)x1070mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. Door pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 3nos. on each leaf .Hinges size 100mm 6nos(3nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 175mm length bifurcated at the tip 3nos. on each side . Handle:- 19x5mm MS flat fabricated 4nos. aldrop 2nos. bought out as per ISS. Tower bolt:- 2nos bought out as per ISS. |
| 37 | MS panneled window double leaved shutter with MS frame and grill Over all size including frame:- 1220mm(H)x910mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. window pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 2nos. on each leaf .Hinges size 100mm 4nos(2nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 100mm length bifurcated at the tip 2nos. on each side . Handle:- 19x5mm MS flat fabricated 2nos. (inside). Tower bolt:-42nos bought out as per ISS.Horozontal grill:- 12mm MS round at 100mm spacing. |
| 38 | MS window grill made out of MS 12mm section square bar conforming to IS-2062/2006 |
| 39 | Labour for fitting and fixing MS Door/window/grill/gate as per approved design . |
| 40 | 6 mm thick plaster with cement mortar (1:4) for plaster over R C C surfaces including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 41 | 12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 42 | 16 mm thick plaster with cement mortar (1:6) over stone/brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 43 | Supplying,fitting & fixing vitrified tile in floors of size (600x600)mm coloured/printed series(homogenious) of approved make conforming to IS:13755 laid on 20 mmthick cement mortar(1:4) & filling joints with white cement of approved quality including cost of all materials,labour T & P etc required for the work all complete as per direction of Engineer-in-charge(For new work only) |
| 44 | Supplying,fitting & fixing vitrified industrial floor tile of primium grade having thickness 8mm to 10mm conforming to IS-4457 of size 3000mmx300mm laid on 20 mmthick cement mortar(1:4) & filling joints with white cement of approved quality including cost of all materials,labour T & P etc required for the work all complete as per direction of Engineer-in-charge |
| 45 | Painting with synthetic paint of approved quality and shade over surface with 2 coats over 1 coat of primer etc. |
| 46 | Priming One Coat with approved Primer On New Surface for weathercoat painting |
| 47 | Painting two coats Weather Coat paint over one coat of Primer |
| 48 | Finishing surface of wall with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete. |
| 49 | Priming One Coat with approved Primer on putty work for Plastic paint |
| 50 | Painting 2 coats to walls with Plastic emultion paint of approved shade including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 51 | 2nd. FLOOR Flyash (10\\") brick work in cement mortar (1:6) using Flyash. bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge. Super st. |
| 52 | Rigid smooth centering for RCC works including false work and dismantling then after casting including cost of all material (a) Col. Super st & beam. |
| 53 | (b) Head room Slab |
| 54 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying. (a) Column ,beam super st., roof slab |
| 55 | Supplying, fitting and placing uncoated HYSD bar rainforcement complete as per Drawing and technical specifecation Column & beam. Roof slab |
| 56 | MS panneled Door Double leaved shutter with MS frame Over all size including frame:- 1980mm(H)x1070mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. Door pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 3nos. on each leaf .Hinges size 100mm 6nos(3nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 175mm length bifurcated at the tip 3nos. on each side . Handle:- 19x5mm MS flat fabricated 4nos. aldrop 2nos. bought out as per ISS. Tower bolt:- 2nos bought out as per ISS. |
| 57 | Labour for fitting and fixing MS Door/window/gate as per approved design . |
| 58 | 6 mm thick plaster with cement mortar (1:4) for plaster over R C C surfaces including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 59 | 12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 60 | 16 mm thick plaster with cement mortar (1:6) over stone/brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. |
| 61 | Supplying,fitting,fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.9m c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in St. case railing as per approved design. |
| 62 | Priming One Coat with approved Primer On New Surface for weathercoat painting |
| 63 | Painting two coats Weather Coat paint over one coat of Primer |
| 64 | Priming One Coat with approved Primer On New Surface for Plastic paint |
| 65 | Painting 2 coats to walls with Plastic emultion paint of approved shade including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender