Tender For Supply, Installation, Testing And Commissioning As Per Rec Standards For Evacuation Of Power Supply By Way Of Laying Of 11Kv Lines (2 No. 11Kv Feeders) From Receiving Station Bonjwah Under Ut Capex Budget 2026-27 In Sub-Division Thathri In, Kishtwar-Jammu And Kashmir
TDR : 56205617
Tender Notice
BOQ
13 Days Left
Kishtwar
Jammu and Kashmir
Tender For Supply, Installation, Testing and Commissioning As Per Rec Standards For Evacuation Of Power Supply By Way Of Laying Of 11Kv Lines (2 No. 11Kv Feeders) From Receiving Station Bonjwah Under Ut Capex Budget 2026-27 In Sub-Division Thathri In
Name of Work:- SITC as per REC Standards for Evacuation of Power Supply by way of laying of 11KV lines (2 no. 11KV feeders) from Receiving Station Bonjwah under UT Capex Budget 2026-27 in Sub-Division Thathri in respect of JPDCL ED Kishtwar on turnkey basis.
Sl. No.
Item Description
1
SITC as per REC Standards for \\"Evacuation of Power Supply by way of laying of 11KV lines (2 no 11kv Feeders) from Receiving Station Bonjwah\\" under UT Capex Budget 2026-27 in Sub-Division Thathri in respect of JPDCL ED Kishtwar on turnkey basis.
2
ST Pole 11 mtr long 410-SP-56
3
ST Pole 9 mtr long 410-SP-33
4
ACSR Rabbit conductor 50mmsq.
5
11KV Pin insulator 12kV,5kN Polymer
6
11KV Disc insulator Polymer with fittings 12kV 45kN
7
C. I Cross Arm 7 ft Long GI (75x40x6) mm
8
C. I. Cross Arm 6 ft Long GI (75x40x6) mm
9
C. I. Cross Arm 5 ft Long GI (75x40x6) mm
10
Angle Brace Tie Brace 6 ft long GI (40x40x6) mm
11
Angle Brace Tie Brace 8 ft long GI (40x40x6) mm
12
Angle Brace 1 Mtr. long GI (40x40x6) mm
13
11KV Link Set 50x6mm
14
Earthing complete by GI Pipe 40mm or GI Rod 20mm, 2.5 mtr. long through GI Strip, (for ST poles)
15
Back Clamps 50x6mm GI
16
HT Galvanised stay set with 50x8mm Stay clamp, Guy insulators (2No.), Anchor plate (200x200x6), Nut Bolts, 2 no. Turn Buckels, 1.8 mtr. long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
17
Cement Bottoming 1:2:4 Mix as per REC Standards of ST Poles 9mtr /11Mtr long 0.45 Cu mtr/pole (1:2:4) ratio
18
Anti climing device for ST Poles
19
Fixing of Danger Plates with clamps
20
Nuts & Bolts Of Sorts Galvanized
21
Applying coating of Red oxide & Almunium Paint on all ST Poles Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
