Tender For Special Repairs To Link Road From P-25 (Admin Building) To Pol And Wet Canteen Area At installation Shikra Under Ge (Nw) Nofra, Colaba, Mumbai
Tender Value
19 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
11 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Link Road From P-25 (Admin Building) To Pol And Wet Canteen Area At installation Shikra Under Ge (Nw) Nofra, Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) and removing debris outside of MD land as directed by Engr in charge. |
| 2 | M&L for 100mm thick PCC 1:4:8 type D2 Using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 3 | Dismantling floor, hearth, cement concrete tiles, interocking paver block including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade of with grey cement and pigments laid over and including 40 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator complete all as specified and directed. |
| 5 | M&L Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and Depth N exc 50mm, complete all as specified and directed. |
| 6 | M&L applying evenly a priming/tack coat with paving bituminous primer at 10 kg per 10 sq metre complete all as specified and as directed |
| 7 | M&L for premix bituminous macadam, 75mm or less consolidated thickness by using paving bitumen VG-30 grade with binder content @ 6% by weight of total mix, laying with mechanical paver, rolled and compacted to required camber and gradient by using 8 to 10 tonne capacity power roller complete all as specified and directed. Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate on MINUS side variation in quantity of bitumen if any shall be priced at the rate of ₹65 per kg. No claim whatsoever shall be made for adjustment in plus side. |
| 8 | M&L applying evenly a priming/tack coat with paving bituminous primer at 5 kg per 10 sq metre complete all as specified and as directed |
| 9 | M&L for laying bituminous premix semi-dense asphaltic concrete 40mm thick (consolidated thickness) with 5.5% binder content by weight of total mix, using paving bitumen of VG-30 grade, laying with mechanical paver & rolled and compacted to required camber and gradient by using power roller 8 to 10 tonne capacity all as specified and directed. Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate on MINUS side variation in quantity of bitumen if any shall be priced at the rate of ₹65 per kg. No claim whatsoever shall be made for adjustment in plus side. |
| 10 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mmx125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all asspecified and directed. |
| 12 | Providing and laying of hot-applied thermoplastic road marking paint, 2.5 mm thick (including of surface-applied glass beads), on bituminous/concrete road surface, including cleaning of surface, applying primer where required, heating to 180-220 degree celcius and applying the thermoplastic material using appropriate applicator machine, and sprinkling glass beads @ 250 g/sq.m for retro-reflectivity,Width n exc 10cm, conforming to MoRTH Specification Clause 803 / IRC:35, complete as directed by Engineer-in-Charge. |
| 13 | M&L for Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in floor/ plinth protection or paving 75 mm thick and finished even and smooth without using extra cement, as in plinth protection all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender