Tender For Miscellaneous Civil Works For Setting Up The Gardenia Restaurant At The Lobby Floor Of Samrat Hotel New Delhi.
Tender Value
59.65 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
2 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Miscellaneous Civil Works For Setting Up The Gardenia Restaurant At The Lobby Floor Of Samrat Hotel New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 3 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 4 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 5 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm. |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. |
| 7 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 9 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse). |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 11 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 12 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent. |
| 13 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red. Area of slab over 0.50 sqm. |
| 14 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 15 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 16 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. |
| 17 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 800 x 800 mm. |
| 18 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Boardwith BIS certification marks). |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 20 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 21 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 22 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 25 | Providing and fixing roller Blinds in fabric in desired shade of basic cost of Rs. 211.86 per Sqft including the rolling mechanism arrangement, accessories & operated by manaually, all complete as direction of engineer-in-charge. |
| 26 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: - Butt hinges and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters. |
| 27 | Providing, fixing, testing and commissioning of white colour vitreous China wall mounting type Rimless Wall Hung WC With PP Soft Close Slim Seat Cover, Hinges, Accessories Set, (Basic rate of EWC is Rs 9040.67) , fastener for fixing on wall and UPVC bend and pipe , all complete including cutting & making good the walls as per direction of the Engineer-in-charge. |
| 28 | Providing and fixing White Viterous China thin rim table top basin in round shape of size 480 x 480 x 135 mm Top Counter Basin ( Basic rate of Rs.4662.70) with fixing Accessories and Waste Coupling 32mm Size Full Thread with 80mm Height , cutting and making good the walls and floor wherever required complete with all respect as per direction of Engineer -in-Charge. |
| 29 | Providing and preparing trap door of size 1500mmx900mm made with second class teak wood frame of 25mm x 50mm and 12.5mm thick gypsum board including necessary nails, fastners etc. All complete as per directions of Engineer - in - Charge. |
| 30 | Providing and fixing Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses (Basic rate of Rs. 3275.00) complete in all respect as per direction of Engineer-in-Charge. |
| 31 | Providing and Fixing of CP brass Health Faucet with 8mm Dia , 1 Meter Long Flexible Tube & Wall Hook (Basic rate = Rs. 1185.59) complete in all respect as per direction Engineer-in-charge. |
| 32 | Providing and fixing white ceramic urinal of size 385 x 325 x 635mm (back inlet) with fixing accessories, the basic cost of ceramic urinal of Rs.5552.54. All complete as per direction of engineer-in-charge. |
| 33 | Providing and Fixing S.S towel rail 600 mm (Basic rate of Rs.1085.59)long including screws, fasteners etc. , complete in all respect as per direction of engineer-in-charge |
| 34 | Providing and fixing soap dispenser (Basic rate of Rs.1138.98) with glass bottle including screws, fasteners etc. complete in all respect as per direction of engineer-in-charge. |
| 35 | Providing and fixing of toilet paper holder (Basic rate of Rs.961.01) with arrangement of accessories complete as per direction of engineer-in-charge. |
| 36 | Providing and fixing CP brass Angle valve with wall flange (Basic rate of Rs.676.27) as per direction of engineer-in- charge. |
| 37 | Providing and fixing C.P. brass stop cock (concealed) of standard design (Basic rate of 605.00) and of approved make conforming to IS:8931. 15 mm nominal bore. |
| 38 | Providing and fixing Bottle Trap for Wash basin and sink. Bottle trap 32mm size with 300 mm &190 mm long wall connection pipe & wall flange (basic rate Rs.1388.13), complete in all respect as per direction of Engineer-in-charge. |
| 39 | Providing and fixing of Stainless Steel Cylindrical Locks (Basic rate of Rs. 718.64) etc. complete as per directions of Engineers-in-charge. |
| 40 | Providing and fixing urinal sensor of approved quality as per directions of Engineer-in- Charge. |
| 41 | Providing and fixing SS Grating 100 mm dia as per directions of Engineer-in-Charge. |
| 42 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 43 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10 mm. |
| 44 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper. |
| 45 | Providing and Fixing SS 304 grade Signage plate of facilties / washroom (200mm x 100mm x 5mm) including cost of materials, writing charges, cartage fixing charges etc. complete in all respect as per direction of Engineer-in-charge. |
| 46 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 47 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length :15 mm nominal bore. |
| 48 | Providing and fixing 6mm thick mirror of superior glass supported pasted on 6 mm thick BWP ply to wooden cleats with C.P. brass screws and washers complete in all respect as per direction of engineer-in-charge. |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. |
| 50 | 20 mm nominal dia Pipes |
| 51 | 32 mm nominal dia Pipes |
| 52 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 53 | 75 mm diameter |
| 54 | 110 mm diameter |
| 55 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989. |
| 56 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm |
| 57 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 58 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 59 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 60 | Wall painting with acrylic emulsion paint of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coat. |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 62 | Providing and fixing customized wall paper after preparation of surface with suitable adhesive. The wall paper should be of basic rate Rs. 144.00/Sqft in desired shade & design and base material, all complete as per direction of engineer-in-charge. |
| 63 | Providing and placing planters of size 2.00x0.30x1.20 Mtr high made with 19 mm thick BWP board cladded with 4 mm thick teak veneer including finishing with PU polish of desired shade and inserting GI box of size 2.00x0.30x0.30. all complete as per the direction of the engineer-in-charge. |
| 64 | Providing and placing cash counter of size 2.00 × 0.60 × 1.05 m, as per drawings and design, made with 18 mm thick BWP plywood, clad internally with 4 mm thick teak wood veneer and externally with fluted charcoal panels. The counter shall have an 18 mm thick top made of composite marble in the desired shade & mirror polish, including one drawer with soft-closing drawer channels, one cabinet with a shutter at the bottom fitted with soft-closing hinges, and an open shelf. The item also includes all necessary hardware such as handles and locks, and provision for concealed LED lighting. All wooden surface shall be finished with PU polish in desired shade & all edges shall be finished teak wood margin, complete as per architectural drawings and as directed by the Engineer-in-Charge. |
| 65 | Providing and placing side rack of size 1.20 × 0.45 × 0.75 m, as per drawings and design, made with 18 mm thick BWP plywood, clad with 4 mm thick teak wood veneer on all exposed surfaces. The unit shall have an 18 mm thick top made of composite marble in the desired shade with mirror polish, including two drawers with soft-closing drawer channels and a cabinet with a shutter at the bottom fitted with soft-closing hinges. The item also includes all necessary hardware such as handles and locks. All wooden surface shall be finished with PU polish in desired shade & all edges shall be finished teak wood margin, complete as per architectural drawings and as directed by the Engineer-in-Charge. complete as per architectural drawings and as directed by the Engineer-in-Charge. |
| 66 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand). |
| 67 | Providing and fixing a wooden baffle made of 18 mm thick BWP board, finished with 4 mm thick teak wood veneer, with an all-around frame of size 75 × 150 mm and middle members of size 75 × 50 mm, fixed at 150 mm center-to-center. The item includes the cost of all fixing arrangements such as nails, screws, fasteners, etc., and shall be securely fixed between the floor and ceiling with suitable fasteners, complete. All wooden surfaces shall be finished with PU polish in the desired shade. All work shall be completed as per direction of Engineer-in-Charge. |
| 68 | Providing and fixing a standalone souvenir wall of 120 mm thickness, made with hardwood framework comprising 75 × 50 mm members for the main outer frame and 50 × 50 mm members for the inner frame, spaced at 600 × 600 mm c/c and securely fixed to the floor with suitable fasteners. The framework shall be clad with 12 mm thick BWP plywood and finished with wallpaper with (Basic rate of Rs. 144 per Sqft) as per the approved design. The item includes 100 mm wide and 30 mm thick teak wood moulding projections, fluted charcoal panels, and 75 mm wide and 20 mm thick teak wood skirting, including required melamine polish. all Complete as per architectural drawings and as directed by the Engineer-in-Charge. |
| 69 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. |
| 70 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 71 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 72 | Providing and fixing wall paneling finished with charcoal panel (WPC Panel) as per approved sample with backing of 12 mm thick BWP ply fixed on frame work of hard wood 25 x 50 mm including making arrangement for fixing concealed LED light all complete as per architectural drawing and direction of engineer- in-charge. |
| 73 | Providing and placing buffet counter of 600mm deep and 750mm height made with base of 18 mm thick BWP ply cladded with combination of WPC panel and teak wood veneer from front and laminate of desired shade at back side with Top made of 18 MM thick Composite marble fixed in seamless moulded design including making space for induction heater and inbuilt electrical work consisting of switch, socket, LED strip and required conduting wiring, all work shall be completed as per drawing & design and as per direction of engineer-in-charge. The electrical items shall be paid separately by the E&M department. |
| 74 | Providing and placing a square table of size 950 mm × 950 mm × 760 mm, with legs made of stainless steel grade 304 using 75 mm diameter pipes of 10-gauge thickness, covered with 12 mm BWP ply and 4 mm thick teak wood veneer. The legs shall be fitted with a 300 mm × 300 mm × 4 mm thick stainless steel plate at the top, and a 10 mm thick mild steel plate covered with a 1.2 mm thick stainless steel cover with tapered edges at the bottom. The tabletop shall be made of 18 mm thick composite marble in the desired colour, with round double-edge moulding, supported with a 19 mm thick BWP board, including fittings and adhesive, etc. All stone surfaces shall be finished with mirror polish. All exposed wooden surfaces shall be finished with PU polish. All work shall be completed as per the drawings, design, and directions of the Engineer-in-Charge. |
| 75 | Providing and placing a teak wood armchair of size 540 mm × 525 mm × 1000 mm, made of second-class teak wood. The arms shall be of section 50 mm × 40 mm, the seat frame of section 50 mm × 25 mm, and the back frame of section 75 mm × 40 mm, including the cost of other materials such as springs, canvas/jute taat, nivar, markin, nails, adhesive, etc. The seat shall be provided with 50 mm thick, 32-density polyurethane (PU) foam, along with an additional 25 mm thick, 32-density foam layer for shaping. The back of the chair shall be provided with 50 mm thick, 32-density PU foam at the front and 25 mm thick, 32-density foam at the back. The seat and back shall be covered with markin cloth and finally upholstered with approved fabric (basic rate of fabric: Rs. 750 per metre). All exposed wooden surfaces shall be finished with PU polish. The work shall be complete in all respects, as per the drawings, design, and directions of the Engineer-in-Charge. |
| 76 | Providing and placing a table of size 1500 mm × 950 mm × 760 mm, with two legs provision made of stainless steel grade 304 using 75 mm diameter pipes of 10-gauge thickness, covered with 12 mm BWP ply and 4 mm thick teak wood veneer. The legs shall be fitted with a 300 mm × 300 mm × 4 mm thick stainless steel plate at the top, and a 10 mm thick mild steel plate covered with a 1.2 mm thick stainless steel cover with tapered edges at the bottom. The tabletop shall be made of 18 mm thick composite marble in the desired colour, with round double-edge moulding, supported with a 19 mm thick BWP board, including fittings and adhesive, etc. All stone surfaces shall be finished with mirror polish. All exposed wooden surfaces shall be finished with PU polish. All work shall be completed as per the drawings, design, and directions of the Engineer-in-Charge. |
| 77 | Providing and placing teak wood bar chair of size 450mm x 500mm X1100 mm. The chair legs shall be off section 40 x 40 mm, the seat frame of section 50 x 25 and back of 40 x 40 mm with two horizontal member of size 125 x 40 mm, 40 x 25 mm frame at bottom of legs and including the cost of other materials such as springs, canvas/jute taat, nivar, markin, nails, adhesive, etc. The seat shall be provided with 50 mm thick, 32-density polyurethane (PU) foam, along with an additional 25 mm thick, 32-density foam layer for shaping. The back of the chair shall be of solid teak wood . The seat shall be covered with markin cloth and finally upholstered with approved fabric (basic rate of fabric: Rs. 750 per metre). All exposed wooden surfaces shall be finished with PU polish in desired shade. The work shall be complete in all respects, as per the drawings, design, and directions of the Engineer-in-Charge. |
| 78 | Providing and placing a sideboard table of size 900 mm x 450 mm x 890 mm, made with 18 mm thick BWP board, with provisions for two openable shutters and two drawers. The top, sides, back, and openable shutters of the table shall be made from 19 mm thick BWP board with 4 mm thick teak veneer on exposed surfaces. Each table drawer shall have an overall size of 420 mm x 410 mm x 100 mm. The fascia of the drawer shall be made from 18 mm thick BWP board, while the sides, back, and bottom of the drawers shall be made with 12 mm BWP ply, finished with 0.80 mm thick laminate on the inner surfaces. The item includes the cost of soft-closing telescopic channels (one pair per drawer), four 4\\" handles of brass, and four caster wheels. All inner surfaces of the table shall be finished with 0.8 mm thick laminate of an approved shade. edges of the drawers shall be finished with teak wood lipping. All shad be completed as per the drawing and design, and as per direction of Engineer-in-Charge. |
| 79 | Providing and placing running Sofa as per drawing with seat size of 600x750x1100 high comprising hard wood frame work with members of size 50x50 mm made to size and shape, 100 thick PU foam for seat of size 550x540 of 40 density, 75mm thick foam for back of size 600x600 of 32 density, 50 mm thick soft foam of 32 density on seat of size 600x600, 25 mm thick foam of 32 density for wrapping all around for shaping the sofa, 12 mm thick foam for quilting the back, upholstered with fabric of approved design of basic rate 750/- mtr., including fixing 12 mm thick bwp ply cladded with 4 mm thick teak veneer finished with PU polish and all required material such as Markin cloth, canvas, spring, nivar, hesian cloth, nails etc complete as per the direction of engineer-in-charge. |
| 80 | Providing and fixing 6mm thick toughened glass in door, window, ventilatot & partition sons etc. complete in all respect as per direction of engineering-in-charge. |
| 81 | Providing and fixing 12 mm thick clear toughened glass in partition including the cost of necessary patch fittings required as per site for proper fixing , complete in all respect as per direction of engineering-in-charge. |
| 82 | Polishing in high gloss/matt finish PU clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1.) The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 320/400 nos. 2.) Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3.) On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade PU fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4.) On this, 1st coat of PU polish is applied with spray gun using PU clear polish and PU thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final PU polish is applied with compressor pressure spray gun using PU clear polish and PU thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 83 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board 610x510 mm bowl depth 200 mm |
| 84 | Providing and placing a display cabinet of size 4.00 × 2.70 × 0.60 m, as per drawing and design, made with 18 mm thick BWP board clad with 4 mm thick teak wood veneer on all exposed surfaces & inner surface shall be finished with 0.8 mm thick laminate. The top shall be finished with 18 mm thick composite marble of desired shade. The cabinet shall consist of 2 Nos. drawers with soft-closing drawer channels, and cabinet shutters made of 18 mm thick BWP board clad with 4 mm thick teak wood veneer at the bottom, complete with soft-closing hinges and open shelves. The item shall include all necessary hardware such as handles, locks, and making arrangements for concealed LED lighting, etc. All edges shall be finished with teak wood lipping/margin. The composite marble top shall be finished with mirror polish, complete in all respects as per architectural drawings and the directions of the Engineer-in-Charge. |
| 85 | Providing and placing a bar counter of size 2.80 × 0.60 × 1.05 m height, as per drawing and design, made with 18 mm thick BWP board clad with 4 mm thick teak wood veneer on the inner exposed surfaces and fluted charcoal paneling on the outer surfaces. The top shall be made of 18 mm thick composite marble of desired shade with mirror polish finish. The counter shall include 1 No. drawer with soft-closing drawer channels and cabinet shutters made of 18 mm thick BWP board clad with 4 mm thick teak wood veneer at the bottom, complete with soft-closing hinges and open shelves. The inner surfaces of the cabinet shall be finished with 0.8 mm thick laminate. The item shall also include all necessary hardware such as handles, locks, teak wood margin/lipping on edges, and making arrangement for concealed LED lighting, etc., complete in all respects as per architectural drawings and the directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender