Tender For Construction Of 5O Mt Godown And Office Building At Chikalakhandi Scs
Tender Value
23.99 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
5 days left
EMD
23998
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 5O Mt Godown And Office Building At Chikalakhandi Scs
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in hard soil or gravelly soil except sheet rock requiring blasting to proper profile with all leads, lifts and delifts to proper section and profile including dressing and levelling the bed upto required depth and making it fit for laying concrete and depositing the excavated materials away from the work site with all leads and lifts including dewatering if necessary from foundation complete as directed by Engineer-in-Charge. |
| 2 | Filling in foundation and plinth with sand, watered and rammed including cost, conveyance & royalty of materials with labour and T&P required for the work. |
| 3 | Cement concrete of proportion (1:3:6) with 40mm & down graded size hand broken H.G. metal for foundation concrete approved quality from approved quarry including hoisting, lowering and laying concrete to the required level ramming, watering, curing etc. complete including cost, conveyance & royalty of materials with all labour charges. |
| 4 | Cement concrete of proportion (1:2:4) with 12 mm size broken hard granite chips for R.C.C works including Hoisting and laying per 1 cum. complete including cost, conveyance & royalty of materials with all labour charges. |
| 5 | Brick work with Fly Ash Bricks in cement mortar (1:6) in F & P of size 9\\"x5\\"x3\\" having crushing strength not less than 75 kg/cm² with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance & royalty of materials with labour charges etc complete in all respect. |
| 6 | Brick work with Fly Ash Bricks in cement mortar (1:6) in Superstructure of size 9\\"x5\\"x3\\" having crushing strength not less than 75 kg/cm² with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance & royalty of materials with labour charges etc complete in all respect.(G.F) |
| 7 | Brick work with Fly Ash Bricks in cement mortar (1:6) in Superstructure of size 9\\"x5\\"x3\\" having crushing strength not less than 75 kg/cm² with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance & royalty of materials with labour charges etc complete in all respect.(F.F) |
| 8 | RCC M-20 work with cement concrete with crushed granite 20mm down grade course aggregate of approved quality mixing by concrete mixer including hoisting, lowering and laying the concrete in position to proper slope and level and compacting by Vibrators in layers .not exceeding 0.15m depth including watering, curing for required period 28 days, centering & shuttering and finishing exposed surface smooth providing grooves whereever necessary including cost, conveyance, royalty and other taxes of all materials . Column Base |
| 9 | Column & Beam UP TO 5 MT |
| 10 | Column & Beam ABOVE 5 MT |
| 11 | Plinth Beam |
| 12 | Lintal Band UP TO 5 mt |
| 13 | Lintal Band ABOVE 5 MT |
| 14 | Chhaja |
| 15 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe- 415), cutting, bending, cracking, hooking, welding or jointing (if required), the M.S rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour charges required for the work etc complete. |
| 16 | 16mm (⅝\\") thick cement plaster (1:6) finishing smooth to inside rough surface of 9\\"/10\\" thick brick walls after racking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour charges required for the work etc complete.G.F |
| 17 | 16mm (⅝\\") thick cement plaster (1:6) finishing smooth to inside rough surface of 9\\"/10\\" thick brick walls after racking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour charges required for the work etc complete.F.F |
| 18 | 12mm thick cement plaster (1:6) finishing smooth to Outside rough surface of 9\\"/10\\" thick brick walls after racking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour charges required for the work etc complete. G.F |
| 19 | 12mm thick cement plaster (1:6) finishing smooth to Outside rough surface of 9\\"/10\\" thick brick walls after racking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour charges required for the work etc complete. F.F |
| 20 | 12mm thick cement plaster (1:4) over brick work with cement punning |
| 21 | 6 mm thick cement plaster in cement mortar (1:4) to RCC surface finished smooth including deep chipping and slury treatment including punning including cost, conveyance & royalty of materials. |
| 22 | 20mm. thick cement plaster grading in c.m. 1:4 including cost conveyance and royality of materials curing etc. complete. |
| 23 | 2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hand broken granites chips. |
| 24 | Fixing chequred tiles in floors,treads or steps and CM (1:1) jointed with neat cement slurry mixed with landings on 25 mm thick pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles |
| 25 | Supplying ,fitting and fixing vertrifed tiles in floors,treads or steps of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 cource sand) and filling joints with white cement of approved quality |
| 26 | Supplying, fitting and fixing Vitrified tile in dados, skirting and riser of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes, Cess & royalities of all materials, labour with T&P complete in all respect in as per specification & direction of Engineer-in-charge. |
| 27 | Supplying ,fitting and fixing Ceramic Floor tyles 30cmx30cm / 40cmx40cm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 cource sand) and filling joints with white cement of approved quality including cost of m |
| 28 | Supplying, fitting and fixing steel angle iron door & window with steel angle iron frame manufactured from standard rolled steel angle section of 40mmx40mmx6mm size with corners of the frame duly mattered and electrically welded with fishtaile hold fasts made out of MS flat size 200mmx50mmx30mm wide and 5mm thick welded to the frame @ 6 nos per frame with 10mm dia MS round bar to be welded at the day with MS hinges of size 100mm 14SWG thick @ 3 nos and 15mm size 1 no. for single & double leaf shutter, aldrop staple and tower bolt hinges duly welded to the frame with one coat of anti corrosive red oxide zinc chrome primer including cost, conveyance, taxes of all materials with all labour charges for the work. |
| 29 | Fixing colour Glazed tiles in wall on 12 mm thick cement plaster(1:3) jointed |
| 30 | Painting two coats with any approved synthetic enamale paint of approved quality shade and make over a coat of priming to new wood work/ iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance, royalty, taxes with all labour charges. |
| 31 | Wall painting two coats on new work with plastic emulsion paint of approved G,F |
| 32 | Wall painting two coats on new work with plastic emulsion paint of approved F.F |
| 33 | Wall painting with two coats weather coat paint of approved shade on new work to give an even shade including cost of paint. G.F |
| 34 | Wall painting with two coats weather coat paint of approved shade on new work to give an even shade including cost of paint.F.F |
| 35 | Priming 1 coat with any appproved Primer for Plaster Surface G.F |
| 36 | Priming 1 coat with any appproved Primer for Plaster Surface F.F |
| 37 | Supplying, fitting, and fixing of Bath room fibre door of approved make including fibre choukatha all GI fittings all cost, conveyance taxes etc complete. |
| 38 | Supplying fitting & fixing of steel ventilator glazed composite with MS grill out side Iron frame with glass pairs including supplying & fixing of putty & wire clips, screw & nails & cost of materials |
| 39 | Supplying and conveying,Labour for fixing GCI Sheet in roof drilling hole in windties including fixing of ridges velleys wind ties etc complete |
| 40 | Supplying,fabrication,fitting,fixing and erection of M.S Tubular Truss & purlin includingall cost,conveyance etc complete |
| 41 | Provision for fitting and fixing and cost of RCC Jally and all other taxes etc. complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 days