|
| 1 | Rewinding charges for the following wet type submersible / Openwell/ Monoblock motors using suitable gauge PVC insulated electrolyte copper wire of suitable no. of turns including deduct the cost of scrap of old removing winding coil etc complete |
| 2 | 5 H.P. |
| 3 | 7.5 H.P. |
| 4 | 10 H.P |
| 5 | Supply and Replacing of following worn out parts in the wet type submersible / Openwell/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 6 | 10 H.P SubmersibleMotor/Openwell/ Monoblock |
| 7 | Bush Set |
| 8 | Housing Bush |
| 9 | Bearing Set |
| 10 | Soft sealing |
| 11 | Oil Sleeve |
| 12 | Thrust Bearing |
| 13 | Pump service - Submersible Motor/Openwell/Monoblock |
| 14 | Gun metal Bush |
| 15 | Bearing Set |
| 16 | Soft Sleeve |
| 17 | Pump Soft |
| 18 | Pump Sleeve |
| 19 | Impeller |
| 20 | Thrust bearing |
| 21 | Oil Sleeve |
| 22 | SS sleeve |
| 23 | Supply and Replacing of following worn out parts in the wet type submersible / Openwell/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 24 | 7.5 H.P SubmersibleMotor/Openwell/Monoblock |
| 25 | Bush Set |
| 26 | Housing Bush |
| 27 | Bearing Set |
| 28 | Oil seal |
| 29 | Soft sealing |
| 30 | Thrust Bearing |
| 31 | Pump service - Submersible Motor/Openwell |
| 32 | Gun metal Bush |
| 33 | Bearing Set |
| 34 | Soft Sleeve |
| 35 | Pump Soft |
| 36 | Pump Sleeve |
| 37 | Impeller |
| 38 | Oil Sleeve |
| 39 | Thrustbearing |
| 40 | SS sleeve |
| 41 | Supply and Replacing of following worn out parts in the wet type submersible motors /Open well/ Monoblock motors with new one including cost of materials and labour. including deduct the old material cost |
| 42 | 5 H.P SubmersibleMotor/Openwell/ Monoblock |
| 43 | Bush Set |
| 44 | Housing Bush |
| 45 | Bearing Set |
| 46 | Soft sealing |
| 47 | Oil Sleeve |
| 48 | Thrust Bearing |
| 49 | Pump service - Submersible Motor/Openwell/ Monoblock |
| 50 | Gun metal Bush |
| 51 | Bearing Set |
| 52 | Soft Sleeve |
| 53 | Pump Soft |
| 54 | Pump Sleeve |
| 55 | Impeller |
| 56 | Thrust bearing |
| 57 | Oil Sleeve |
| 58 | SS sleeve |
| 59 | Supply and deliver of following panel board parts newly to replace the worn out parts including deduct the old materials cost which were replaced |
| 60 | Preventor |
| 61 | Voltmeter/Ammeter |
| 62 | Indicator lamps |
| 63 | Bush button |
| 64 | Ammeter selector. |
| 65 | Conductor |
| 66 | Terminal |
| 67 | Overload relay |
| 68 | Labour charges - Submersible Motor/Openwell |
| 69 | Labour charges for Removal of submersible pumpsets and its accessories from open well/ Borewell for attending repair works and Re-erection of submersible pumpsets and its accessoriel from open well/Borewell after attending the repairs, including fixing and jointing of submersible cable with clamps etc complete |
| 70 | Conveyance of power pumpset (centrifugual, jet and submersible) and its acessories from site of works to workshop for attending repair works, and then to work site Conveyance upto 10kms |
| 71 | Supply and replacing of following water supply materials including deduct old materials |
| 72 | 50mm dia G.I., pipe B class (Medium) |
| 73 | 40mm dia G.I., pipe B class (Medium) |
| 74 | 50 mm Coupling (GI) |
| 75 | 40mm Coupling (GI) |
| 76 | 50mm GI Union |
| 77 | 40mm Union |
| 78 | 2\\" Gate valve |
| 79 | 1 1/2\\" gun metal valve |
| 80 | 50 mm GI Elbow |
| 81 | cables |
| 82 | 2.5 sq mm submersible cables |
| 83 | 4 sq mm submersible cables |
| 84 | Supply and Replacing of following wornout Elecrtical meterials with new one including cost of materials and labour including deduct the old material cost |
| 85 | 7/20 Copper wire |
| 86 | 7/20 GI Wire |
| 87 | 4 way Reel Insulator |
| 88 | 32 A Fuse unit |
| 89 | 63 A fuse unit |
| 90 | 100 A fuse unit |
| 91 | 16A main switch |
| 92 | 63A MCB |
| 93 | Supply and Delivery of 7.5 HP Starter |
| 94 | GST 18% Please Enable Macros to View BoQ information |
