Tender For annual repair & maintenance of Of T-Ii Qtrs. (Block-C Three Storied 6 Sets), Type-Ii Qtrs. (Block-D Two Storied, ½ Section 2 Sets) And Type-Ii Qtrs. (Block-E, Single Storied, 2Sets) Old Building At Power Colony, Totu Shimla-11 (H.P) For Th
Tender Value
2.43 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
1 days left
EMD
2450
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Of T-Ii Qtrs. (Block-C Three Storied 6 Sets), Type-Ii Qtrs. (Block-D Two Storied, ½ Section 2 Sets) And Type-Ii Qtrs. (Block-E, Single Storied, 2Sets) Old Building At Power Colony, Totu Shimla-11 (H.P) For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means . The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account |
| 2 | 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.5 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 3 | 13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.3.81.1 One coat |
| 4 | 13.91 removing dey or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 5 | 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 6 | 13.82 Wall painting with acrylic emulsion paint VOC Volatile Organic Compound ) content less than 50grams/ litre, of approved brand and manufacture,including applying additional coats wherever required, to achieve even shade and colour. 13.82.2 Two coats |
| 7 | 13.109 Fnishing walls with water proofing cement paint of required shade :13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 8 | 13.99 Painting with synthetic enamel paint with approved brand and manufacture of required colour to give an even shade :13.99.1 One or more coats on old work |
| 9 | 13.92 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.92.1 Old work (one or more coats) |
| 10 | 9.27 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :9.27.1 35 mm thick shutters |
| 11 | 9.7 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :9.7.2 Kiln seasoned and chemically treated hollock wood Qty for T-II Qtr Set No.-4 door= 1x0.95x2.10=1.99 sqm |
| 12 | 17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.17.18.1 10 litre capacity - White (Cera/Bathsence/Hindware/Somany make) |
| 13 | 14.45 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of EngineerIn-Charge. Lum Sum= 2.00 mtr |
| 14 | 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 18.18.1 15 mm nominal bore |
| 16 | Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Exhaust Fan, Light duty, (Domestic) 300 mm sweep Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender