Tender For Water Supply Scheme Binwa In Tehsil Baijnath District Kangra Hp (Sh:- Laying Jointing And Testing Of Gi Pipe Of Various Dia And Various Locations, Butt Welding And Gi Fitting Under Pdna) Estimated Cost Rs. 192733/-Only Earnest Money Rs. 40
Tender Value
1.92 Lakhs
Estimated cost
Bid Submission
03 Jul 2026
1 days left
EMD
4000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Water Supply Scheme Binwa In Tehsil Baijnath District Kangra Hp (Sh:- Laying Jointing And Testing Of Gi Pipe Of Various Dia And Various Locations, Butt Welding And Gi Fitting Under Pdna) Estimated Cost Rs. 192733/-Only Earnest Money Rs. 4000/-Only Time Limit One Month Cost Of Form Rs. 350/-
BOQ
| Sl. No. | Item Description |
| 1 | Excavation In foundations, trenches etc., in earth work,lift upto 1.50 mts.stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required in to plinths sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in lead of 20 metres complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 2 | Laying, jointing and testing GMS tube screwed and socketed Light /Medium class of following diameter including tube fitting complete(earth work to be measured and paid for separately including testing of joints, complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 3 | 50 mm dia. |
| 4 | 80 mm dia. |
| 5 | Providing and fixing of GI Union conforming to ISI specification number 1879-1975 of following dia heavy duty ISI marked complete fixing at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 6 | 50 mm dia. |
| 7 | 15 mm dia. |
| 8 | Providing and fixing of GI Elbow conforming to ISI specification number 1879-1975 of following dia heavy duty ISI marked complete fixing at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 9 | 15 mm dia. |
| 10 | Providing and supplying of Gun Metal Ball Valves of Bir Make of following dia heavy duty ISI Marked complete with bolts nuts, rubber insertion etc. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 11 | 50 mm dia. |
| 12 | Providing and fixing of GI socket conforming to ISI mark of following dia heavy duty ISI marked complete fixing at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 13 | 15 mm dia. |
| 14 | Providing and fixing of GI Nipple conforming to ISI mark of following dia heavy duty ISI marked complete fixing at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 15 | 15 mm dia. |
| 16 | 50 mm dia. |
| 17 | Providing , fixing and welding MS flanges of following tables as per IS 6392-1971 (Last with upto date amendments) with plain end G.I/MSERW pipe in three (One inner and two outer) number of layers on both faces to make the joint leak proof (The cost of providing and laying of GI pipes to be measured and paid for separately). The welding of flanges should conform to IS 816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364. including cost of gasket sheet nuts & bolts. The thickness of gasket sheet not less then 3.00 mm conforming to IS 2712-1998. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . |
| 18 | 250 mm dia. |
| 19 | Providing Circumferencial Butt welded joints by electrical welding of following dia GI pipe medium/heavy class, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodesconforming to IS 814-1991, at site of work complete in all respects, including manual/machanical handling of pipes complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge. |
| 20 | 50 mm dia. |
| 21 | 80 mm dia. |
| 22 | 250 mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 days