Tender For Construction Of Parking Cum Office Accommodation (Ellerslie Phase-Ii At H.P Sectt Shimla.( Sh:- Reconstruction Of Reception Hall And Balance Work Of Ellerslie Phase-Ii Building Etc)
Tender Value
8.28 Crore
Estimated cost
Bid Submission
04 Jul 2026
2 days left
EMD
16.57 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Parking Cum Office Accommodation (Ellerslie Phase-Ii At H.P Sectt Shimla.( Sh:- Reconstruction Of Reception Hall And Balance Work Of Ellerslie Phase-Ii Building Etc)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- G.S. Sheet. |
| 2 | Dismantling wood work in frames, trusses, purlins and rafters up to 10metres span and 5metres height including stacking the material including carriage of material within all leads and lifts as per direction of Engineer-in-charge:-Of sectional area 40square centimetres and above. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking the material including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- Of area 3square metres and below. |
| 4 | Demolishing brick work manually/ mechanical means including stacking of serviceable material and disposal of unserviceable material including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- In mud mortar. |
| 5 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 6 | Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable materials with in all leads and lifts. |
| 7 | Dismentaling of tile work in floors and roofs laid in cement mortar including stacking material within all leads and lifts; for thickness of tile 10 mm to 25 mm. |
| 8 | Earth work in cutting by mechanical means (Hydraulic excavator)/ manual means in all heights and depths in all kinds of soil including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rock (where blasting is prohibited and their intermediate classifications soils including dewatering where ever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, according to the CPWD specification and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site excluding prescribed dumping charges to be arranged by the contractor himself to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour machineries, tools equipments and safety measures and incidentals necessary to complete the work wise mechanical means and labour (if required) all useful material such as stones,shingles aggregate and slates shall be properly stacked at site to the meximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor including carriage of materials within all leads and lifts in all respect including all incidental charges:- All kinds of soil. |
| 9 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in all heights and depths or in foundation trenches etc. in all kinds of soil including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rock (where blasting is prohibited and their intermediate classifications soils including dewatering where ever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, according to the CPWD specification and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site including prescribed dumping charges to be arranged by the contractor himself to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour machineries, tools equipments and safety measures and incidentals necessary to complete the work wise mechanical means and labour (if required) all useful material such as stones,shingles aggregate and slates shall be properly stacked at site to the meximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor including carriage of materials within all leads and lifts in all respect including all incidental charges:- All kinds of soil. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts Circular up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral stair cases up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20cm wide up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Small lintels of any span, moulding as in cornices,window sills, string courses, bands, copings, bed plates, anchor blocks and the like up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Arches, domes, vaults upto 6.00 mtrs. Span up to all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level and all floor level in cement concrete1:4:8 (one Cement : four coarse sand : eight graded stone aggregate forty milimetre nominal size) upto all height complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in all work up to plinth level and all floor level 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 21 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level in cement concrete 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20mm nominal size) and retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks,etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 22 | Providing and laying in position specified grade of reinforced cement concrete M-30 design mix, excluding the cost of centering, shuttering, finishing and reinforcement :-All work up to plinth level complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 23 | Reinforced cement concrete work M-40 design mix in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor levels, excluding the cost of centering, shuttering, finishing complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 24 | Reinforced cement concrete work M-40 in walls (any thickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level, excluding cost of centering, shuttering, finishing and reinforcement (M-25) design mix upto all floor level complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 25 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 26 | Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposit direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1: 4 (1 cement :4 sand) admioxed with 200ml of pidiproof LW @ 200ml per 50kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 27 | Steel reinforcement of TATA, SAIL, JINDAL or its equivalent for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars complete above plinth level up to all floor levels including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- Thermo-Mechanically Treated bars of grade i.Fe-500D or more. |
| 28 | Providing and laying autoclaved aerated cement blocks masonry having sound proof with 150mm/ 230mm/ 300mm thick AAC blocks in super structure above plinth level up to floor all levels/ all heights with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete (The payment of RCC band and reinforcement shall be made for seperately) including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 29 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor heights in all shapes and sizes in cement mortar 1:4 (1 cement : 4 sand) including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 30 | Stone soling properly hand with hand durmat packed filling interstices with Kharanja stone including sperding, watering and ramming under floor specified thickness complete as per HP.PWD specification including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 31 | Stone filling behind retaining wall per HP.PWD specification 1990 Volume-I including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 32 | Providing weepholes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 33 | Providing and fixing Factory built up UPVC casement three Track window of approved make & colour, profile specifications having 118mm x 56mm, 2 Glass Panels one from one sliding with espage multi point locking system, one 56 mesh sliding Panel with Aluminium and 1.5mm 2mm GI reinforcement including Coupling, sash bars inving shutters and 6 mm 12mm + 6 mm DGU toughned glass, gap filed with argon gas lived with thermoplastic elastomer (TPE) gasket including Zinc alloy casement handle Friction Stay/20 hinges/ butt hinges, locking strickers and grills, etc .complete in all respert as per approved Architectural drawing and including carraige of materials in all leads and its as per the direction of the Engineer-in-Charge. |
| 34 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-First Class Teak wood. |
| 35 | Providing and fixing ISI marked Factory made Flush Doors shutter of Commercial board i.e. non decorative Phenol bonded termite resistant and water proof core of block board construction with full frame of first class hard wood and well match of flush door shutters conforming to IS:2202 (Part-I) decorative type, core of block board construction with teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (i) 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 36 | Providing and fixing 9mm thick water proof ply wood kit ply (gold) or equivalent lining or ceiling including mitring at junctions, butt jointing and nails complete upto all floor levels (Frame work for base to be measured and paid for separately) including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 37 | Providing and fixing 3mm or 4 mm thick water proof Termite resistant Teak ply of Oak wood Veneer Cladding / lining (Century) as per drawing/ design or equivalent in lining including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately)including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 38 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge:-40mm thick first class teak wood. |
| 39 | Providing and fixing 40mm thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- Teak wood first class. |
| 40 | Providing and fixing 300mm X 16mm CP Brass sliding door bolts ISI marked anodized (anodic coating not less than grade AC10 as per IS : 1868), transparent or dyed to required colour or shade with nuts and screws etc. complete upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 41 | Providing and fixing 250mm X 16mm CP Brass sliding door bolts ISI marked anodized (anodic coating not less than grade AC10 as per IS: 1868), transparent or dyed to required colour or shade with nuts and screws etc. complete upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer- in- Charge. |
| 42 | Providing and fixing 200mm X10mm CP Brass tower bolts ISI marked, anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer- in- Charge. |
| 43 | Providing and fixing 100mm X 10mm CP Brass tower bolts ISI marked, anodized (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer- in- Charge. |
| 44 | Providing and fixing 450mm CP Ornamental Brass handles, ISI marked anodized (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer- in- Charge. |
| 45 | Providing and fixing 200 mm CP Brass handles, ISI marked anodized (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer- in- Charge. |
| 46 | Providing and fixing 100mm CP Brass handles, ISI marked anodized (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer- in- Charge. |
| 47 | Providing and fixing stain less steel hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- Twin rubber stopper. |
| 48 | Providing and fixingCP steel body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35kg and door width up to 700mm), with necessary accessories and screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 49 | Providing and fixing 2nd class Teak wood 50mm X12mm or 50mm X 20mm size or as required wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 50 | Providing and fixing 6mm thick water proof ply wood kit ply (gold) or equivalent lining or ceiling including mitring at junctions, butt jointing and nails complete upto all floor levels (Frame work for base to be measured and paid for separately) including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 51 | Providing and fixing 19mm thick water proof HDMR board or equivalent in shelves/box for cup board or on wall lining etc, with butt joints and fixing with nails and screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 52 | Providing and fixing 19mm thick HDMR board or equivalent water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 53 | Providing and fixing square edged cover fillets (beading) 19mm x 6mm section including mitring at junction with wooden screws / nails etc complete of 1st class indian teak wood complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 54 | Providing and fixing 65mm X 35mm special quality bright finished brass cup board lock with six levers including necessary screws etc. (Godrej make or equivalent of approved quality) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 55 | Providing and fixing approved make furniture brass handles fixed with screws etc. complete 125mm complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 56 | Providing and fixing magnetic catcher (M-15) of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 57 | Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 58 | Providing and fixing sliding arrangement in racks/ cupboards/ cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 59 | Providing and fixing 1.00mm thick coloured or plain laminated sheet (sunmica) marked No. 12823 of approved shade of and sample and quality of Kit Vista of Kit ply or its equivlent on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 60 | Providing and fixing chromium plated brass curtain rod having wall thick 25mm dia of 1.25mm with two chromium plated brass brackets and finals etc. complete fixed with C.P. Brass screws and PVC sleeves etc., whereever required in all respect up all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-25mm dia. |
| 61 | Providing 10mm thick plaster of paris (Gypsum unhydrous) ceiling upto a height of 5 metres or above floor level over G.I aluminium coated frame work of 65 mmx50 mm x2 mm thick main channel, 75 mm x 25 mmx2 mm cross strips and L-type suspenders of size 65 mmx2 mm section & 30 cm in height fixed with fasteners of 7.50 cm in length complete in all respect as per design / drwaing of Architect No. 7 of job No.8355 and direction of the Engineer-in- Charge |
| 62 | Providing and fixing POP Mouldings of all shape and size as per approved sample and Architectural Drawing complete including making recessed mould etc. and as per direction of Engineer-in- Charge complete including carriage. |
| 63 | Steel work including hollow section welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel including hollow section etc. as required upto all floor levels in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works all complete as specified and as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 64 | Providing and fixing 50mm x 50mm section hand rail round end at two levels as per Architectural drawing complete of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer upto all floor levels including carriage of materials in all leads and lifts as directed by the Engineer-in-Charge. |
| 65 | Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40mm x 40mm x 6mm, with 40mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 66 | Providing and fixing 2.00mm thick aluminium sheet lining in shutters with necessary screws/ nails etc. upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 67 | Providing and laying 40mm thick cement concrete flooring 1:2:4 {1 cement : 2 sand : 4 graded stone aggregate 20mm (twenty millimetre) nominal size} laid in one layer finished with a floating coat of neat cement including cement slurry upto all floor levels complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 68 | Providing and laying 55cm X 55cm of uniform colour in combination with white as per approved Architectural drawing of Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) upto all floor levels complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- 19mm thick. |
| 69 | Providing and laying 19mm (nineteen milimetres) thick rough finished Kota ( 80% polished & 20% unpolished) in Treads with 5cm (five centimetres) wide flaming band near nosing and fully polished in Risers of approved shade and sample in full length of treads & risers (in single piece) of Kota stone as per required size and as per approved Architectural drawings over 20mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. complete as specified and as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 70 | Providing and laying 19mm (nineteen milimetrs) thick Polished White Jaiselmer /Yellow Marble stone slab single piece in risers, skirting and dado in linear as well as curvilinear portions of the building all complete as per the Architectural drawings with 19mm (ninteen milimetres) thick stone slab over 20mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge up to all floor levels including carriage of materials in all leads and lifts. |
| 71 | Providing and laying Trimax flooring of reinforced cement concrete pavement of grade 1:1.5:3 (1 cement: 1.5 Cource sand: 3 graded stone aggregate 20mm nominal size) including the cost of centring and shuttering and reinforcement with 8mm spacing as directed by Engineer-in-Charge and after screed board vibrator, vaccum dewatering process and finally finished by sprinkelling of hardening compound Nitofloor of FOS gaurd on surface evenly @ 5kg per sqm and finishing the surface by floating, brooming with wire brush etc. The width of pavement shall be 4000mm and groove of appropriate size 10mm x 20mm shall be cut with the machine on appropriate spacing as directed by Engineer-in-Charge filling this groove with approved grout/ sealent with beckar rod including making good the same all complete as specified and as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 72 | Providing double edge moulding/ nosing in treads of steps 19mm thick marble/ Kota / Granite stone including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge including carriage of materials within all leads and lifts. |
| 73 | Providing and laying first quality full body non slipery Matt finish Double Charged vetrified floor tiles of size 600mm x 600mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown of Kajaria / Nitco/ Smpolo/ Somany/ Johnson/ Orient and Bell Tiles or its equivelent make of approved shade & sample laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete up to all floor levels complete as per direction of Engineer-in- charge including carriage of materials within all leads and lifts. |
| 74 | Providing and laying 1st quality full body non slipery Matt finish vetrified/ Ceramic floor tiles of size 300mm x 300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown of Kajaria / Nitco/ Smpolo/ Somany/Johnson/ Orient and Bell Tiles or its equivelent make of approved shade & sample in floor laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete up to all floor levels complete as per direction of Engineer-in- charge including carriage of materials within all leads and lifts. |
| 75 | Providing and fixing 19mm thick black granite of gang saw cut, mirror polished, pre-moulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) laid and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.complete as per direction of Engineer-in- charge including carriage of materials within all leads and lifts. |
| 76 | Providing and laying of Kajaria / Nitco/ Smpolo/ Somany/Johnson/ Orient and Bell Tiles or equivlent of first quality of approved shade and sample Ceramic Glazed tiles of 300mm X 600mm (thirty centimetre by sixty centimetres) with one border matching / contrast at top or as per approved shade water absorption less than 0.08% and confor-ming to I.S. 15622, of approved make, in all colours and shade, in Dado, skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete upto all floor levesl complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 77 | Providing and fixing 18mm thick mirror/ eggshell polished, Granite stone work for wall lining / cladding having Grey streaks (veneer work) including dado, skirting, risers of steps etc. in required design and pattern wherever required, stones of different finished surface texture on 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, polishing etc. all complete as per Architectural drawings and as directed by the Engineer-in-Charge complete up to all floor levels including carriage of materials in all leads and lifts. |
| 78 | Providing and laying heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M-50 grade/including border or kurb block grey or coloured over subbase of concrete with 25 mm ( twenty five milimetre ) thick average thickness of cement concrete 1:4 ( one cement four sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curring rubbing and polishing complet subbase concrete floor to be paid for separetly including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 25mm (twenty five milimetre)thick inter locking blocks (NTC/ATLANTIC & its equvalent) |
| 79 | Providing and fixing on wall face unplasticised Rigid PVC (Finolex type - B) rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- Single socketed pipes 110mm diameter type-B. |
| 80 | Providing and fixing M.S clamps made of made of MS flat 25mm X 3mm fixed with steel screws and rawl plugs etc. complete. including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- 100mm diametre. |
| 81 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion complete including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge:- Single pushfit Coupler 110mm dia. |
| 82 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion complete including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge:- Single Tee with or without door 110mm dia. |
| 83 | Providing and fixing on wall face unplasticised - PVC Type A moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:-Bend 87.5° 110mm bend. |
| 84 | Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion complete including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge. :-Shoe (Plain) 110mm dia. |
| 85 | Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion complete including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge:-Shoe (Plain) 75mm dia. |
| 86 | 6mm (six milimetre) cement plaster in ceiling 1:3 (1 cement : 3 fine sand) upto all floor levels and heights complete or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 87 | 15mm cement plaster on the fair side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) with 15cm wide plaster bands as per Architectural drawing upto all floor levels and heights complete or as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts. |
| 88 | 15mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) with 15cm wide plaster bands as per Architectural drawing upto all floor levels and heights complete or as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts. |
| 89 | Providing and applying two coats white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 90 | Finishing walls with 100% Premium acrylic emulsion Apex paint having VOC less than 50gm/liter and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43liter/ 10sqm over and including priming coat of exterior primer applied @ 0.90liter/ 10sqm (Circulation area) upto all floor levels and heights including carriage of materials in all leads and lifts. |
| 91 | Distempering with Acrylic oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer smooth complete or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 92 | Wall painting with satin emulsion paint of approved brand and manufacture to give an even shade :-(including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.i) Two or more coats on new work. |
| 93 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90ltr/10sqm over an under coat of primer applied @0.75ltr/10sqm of approved brand and manufacture upto all floor levels and heights complete or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 94 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90ltr/10sqm over an under coat of primer applied @ 0.80ltr/10sqm of approved brand and manufacture upto all floor levels and heights complete or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 95 | Melamine polishing two or more coats on new wood works / ply including multy coats of wood filler, sealer after making the surface smooth with sand paper complete or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts. |
| 96 | Providing, laying and jointing glazed stoneware half round pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete over base concrete which will be paid separately) including carriage of materials in all leads and lifts as per direction of Engineer-in-charge by mechanical or manual means:-250mm radius. |
| 97 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000mm x 450mm x 50mm, reinforced with 8 mm dia four nos longitudinal & 9No. cross sectional T.M.T. hoop bars, including providing 50mm dia perforations @ 100mm to 125mm c/c, including providing edge binding with M.S. flats of size 50mm x 1.6mm complete, all as per direction of Engineer-in-charge including carriage of materials in all leads and lifts. |
| 98 | Providing and fixing pipes on wall face 150mm dia PVC Finolex type-B spigot, socket, waste and ventilating pipes of working pressure not less than 4.5kg/ sqm including coller and filling the joints with approved adhesive complete including carriage of materials in all leads and lifts as per direction of Engineer-in-charge. |
| 99 | Providing and fixing pipes on wall face 110mm dia PVC Finolex type-B spigot, socket, waste and ventilating pipes of working pressure not less than 4.5kg/ sqm including coller and filling the joints with approved adhesive complete including carriage of materials in all leads and lifts as per direction of Engineer-in-charge. |
| 100 | Providing and fixing pipes on wall face 75mm dia PVC Finolex type-B spigot, socket, waste and ventilating pipes of working pressure not less than 4.5kg/ sqm including coller and filling the joints with approved adhesive complete including carriage of materials in all leads and lifts as per direction of Engineer-in-charge. |
| 101 | Providing and fixing 110mm dia PVC Finolex single equal branch plain including carriage of materials within all leads and lifts as per direction of Engineer-in-charge. |
| 102 | Providing and fixing 75mm dia PVC Finolex single equal branch plain including carriage of materials within all leads and lifts as per direction of Engineer-in-charge. |
| 103 | Providing and fixing 110mm X 75mmm dia PVC Finolex single un-equal branch plain including carriage of materials within all leads and lifts as per direction of Engineer-in-charge. |
| 104 | Providing and fixing 150mm dia PVC Plain bend with insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 105 | Providing and fixing 110mm dia PVC Plain bend with insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 106 | Providing and fixing 75mm dia PVC Plain bend with insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 107 | Providing and fixing 110mm dia PVC door bend with oval access door, insertion rubber washer ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 108 | Providing and fixing 75mm dia PVC door bend with oval access door, insertion rubber washer ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 109 | Providing and fixing 150mm dia PVC collar with oval access door, insertion rubber washer ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 110 | Providing and fixing 110mm dia PVC collar with oval access door, insertion rubber washer ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 111 | Providing and fixing 75mm dia PVC collar with oval access door, insertion rubber washer ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 112 | Providing and fixing 110mm X 75mm size PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 113 | Providing and fixing 110mm dia PVC Finolex cowl ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 114 | Providing and fixing 100mm dia chromium plated grating of Jaquare or approved quality for floor, gully or nahani trap including carriage of materials within all leads and lifts as per direction of Engineer-in- charge. |
| 115 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete complete as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts:- Semi Rigid 40mm dia. |
| 116 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of materials in all leads and lift as per direction of Engineer in Charge:- External work 25mm dia nominal bore. |
| 117 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia |
| 118 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :20 mm dia nominal bore |
| 119 | Providing and fixing SFMC fusion jointing PPR pipes thermal stability for hot and cold water supply, including all plain and brass threated fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with fusion welding and testing of joints complete as per direction of Engineer-in- Charge. internal/Concealed work include cutting, chases, cutting and making good the walls etc. 15 mm inner dia. |
| 120 | Providing and fixing SFMC fusion jointing PPR pipes thermal stability for hot and cold water supply, including all plain and brass threated fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with fusion welding and testing of joints complete as per direction of Engineer-in- Charge. internal/Concealed work include cutting, chases, cutting and making good the walls etc.20 mm inner dia. |
| 121 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25mm to 40mm nominal bore complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 122 | Providing and fixing water meter bulk type of approved make and dully tested from approved lab complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 123 | Providing and fixing 15mm nominal bore cromium plated brass stop cock of ISI marked IS No. 8934 of Jaquar or its equivlent approved quality complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 124 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) complete including carriage of materials in all leads and lift as per direction of Engineer in Charge:- 20mm nominal bore. |
| 125 | Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) complete including carriage of materials in all leads and lift as per direction of Engineer in Charge:- 15mm nominal bore. |
| 126 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 127 | Providing and fixing 20mm nominal bore ball valve (brass) of Jaquare or approved quality, High or low pressure, with plastic floats complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 128 | Providing and fixing 15mm nominal bore ball valve (brass) of Jaquare or approved quality, High or low pressure, with plastic floats complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 129 | Providing and fixing white vitreous china pedestal type water closet (European type Seat Hindware cat No. 20049 or its equivlent with seat and lid, 10litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lift as per direction of Engineer in Charge:- W.C. pan with ISI marked white solid plastic seat and lid. |
| 130 | Providing and fixing Vetrious China wash basin with pedestal of Jaquar or its equivlant , C.I. brackets, 15 mm C.P. brass pillar taps ISI marked IS No. 8934 of Jaquar or its equivlant, 32 mm C.P. brass waste of standard pattern, including painting of fitting sand brackets, cutting and making good the walls wherever require:-White Vitreous China Wash basin code : LYS WHT-38801 + LYS-WHT-38305 (Clair) of size 550mm x 400mm with Pedestal of Cera or its equivlent with a pair of 15 mm C.P brass pillar taps complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 131 | Providing and fixing white Stain less Steel sink double bowl as per approved sample of Jaquar or its equivelent with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, includingpainting of fittings and brackets, cutting and making good the wall wherever required including carriage of materials within all leads and lifts:- 510x1040 mm bowl depth 225mm. |
| 132 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing complete as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts:- Rectangular shape 600mm x 450mm. |
| 133 | Providing and fixing 600mm x 120mm x 5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc., complete as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts. |
| 134 | Providing and fixing C.P Toilet paper holder of Jaquar or superior quality complete as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts. |
| 135 | Providing and fixing PVC reducer of ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 150mm x 110mm (one hundred fifty by one hundered ten milimetre) nominal size. |
| 136 | Providing and fixing PVC reducer of ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 110mm x 75mm (one hundered ten by seventy five milimetre) nominal size. |
| 137 | Providing and fixing PVC (finolex) double equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-110mm (one hundred ten milimetre) nominal size. |
| 138 | Providing and fixing PVC (finolex) double equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:- 75mm (seventy five milimetre) nominal size. |
| 139 | Providing and fixing Viking make uplasticised PVC connection pipe with brass unions complete including carriage of materials in all leads and lift as per direction of Engineer in Charge:-45cm length15mm nominal bore. |
| 140 | Providing and fixing C.P. brass of Jaquar or its equivlent long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 141 | Providing and fixing 15mm nominal bore C.P. brass ISI marked IS No. COP-CHR-005BPM of Jaquar or its equivlent basin mixer hot and cold long body complete as per direction of Engineer-in-charge including carriage of materials within all leads and lifts. |
| 142 | Providing and fixing C.P. Brass extension nipple of size 15mm x 50mm of approved make and quality as per direction of Engineer-in-charge including carriage of materials within all leads and lifts. |
| 143 | Poviding and fixing C.P towel rail of Jaquar or its equivlant make complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete as per direction of Engineer-in-charge including carriage of materials within all leads and lifts:- 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 144 | Providing and fixing C.P brass towel ring trapezoidal shape 21 mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour complete as per direction of Engineer-in-charge including carriage of materials within all leads and lifts. |
| 145 | Providing and fixing 8mm dia C.P. / S.S. Jet with flexible tube upto 1.00 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge complete including carriage of materials in all leads and lifts. |
| 146 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.50mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) complete as per direction of Engineer-in-charge including carriage of materials within all leads and lifts:-100mm dia. |
| 147 | Providing & fixing 15mm nominal bore chrome plated brass battery based infrared sensor operated long body pillar cock, having foam flow technology of Jaquar or its equivlent make complete as per direction of Engineer-in-charge including carriage of materials within all leads and lifts. |
| 148 | Providing and fixing 25mm nominal bore G.I./M.I Union of following sizes (where not included in the items complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 149 | Providing and fixing 20mm nominal bore G.I./M.I Union of following sizes (where not included in the items complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 150 | Providing and fixing 15mm nominal bore G.I./M.I Union of following sizes (where not included in the items complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 151 | Providing and fixing G.I inlet connection for wash basin or sink complete with accesesories of Jaquar or its equivlant superior quality complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 152 | Providing and fixing SST P Grab Bars of Jal/ESS /Hindware or any its equivlant approved make for handicapped persion including fixing complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 153 | Providing and fixing Liquid soap container of Jal/ESS or its equivlant make or approved brand and manufacturer superior quality complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 154 | Providing and fixing stainless steel soap dish of Jaquar or its equivlant make or approved superior quality with fitting arrangements complete in all respect as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts. |
| 155 | Providing and fixing 600mm X 330mm size Urinal division plate of Marble well moulded on corner and round edges etc. including fixing arrangement accesories complete for urinals complete in all respect as per direction of Engineer-in- Charge including carriage of materials within all leads and lifts. |
| 156 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 157 | Providing and fixing white vitreous china extended wall mounting water closet of approved size, shape,of Jaqure or equivalent make including providing & fixing of white Vetrious china cistern with dual flush fitting of flushing capacity adjustable to 5 litre / 10litre) including seat cover and cistern fittings with nuts, bolts and gasket etc. complete including carriage of materials within all leads and lifts as per direction of the Engineer in Charge. |
| 158 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90cm x 80cm and 45cm deep including C.I. cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116kg (weight of cover 58kg and weight of frame 58 kg). With Sewer bricks conforming to IS complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 159 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :(ii) Inside size 120cm x 90cm and 90cm deep including C.I. cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116kg (weight of cover 58kg and weight of frame 58kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. |
| 160 | Cutting holes upto 30cm x 30cm in walls and making good the same including disposal of dismentalled materials in all leads at his own cost including carriage of materials within all leads and lifts as per direction of the Engineer in Charge. |
| 161 | Cutting holes upto 15cm X 15cm in RCC floors for passing drain pipesincluding disposal of dismentalled materials in all leads at his own cost including carriage of materials within all leads and lifts as per direction of the Engineer in Charge. |
| 162 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality(i) Rectangular shape 600x450 mm internal dimensions of NTC or equivelent including carriage of materials within all leads and lifts as per direction of the Engineer in Charge. |
| 163 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455mm X 610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455mm x 610mm and 45cm deep for single pipe line with common burnt clay F.P.S. (non modular) bricks of class designation 7.50 complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 164 | Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed Door/windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1mm G.I. section and sash bar/ mullion with 1.50mm ± 0.2mm thick galvanized mild steel section based on wind load calculations, (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, Co- extruded TPV Gasket having saperate drainage system, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100mm x 8mm size for fixing frame to finished wall, After fixing frame the gap between frame and adjacent finished wall shall be filled with PU foam/ weather proof silicon completed in all respect : casement window made from NCL Finista profilewith openable pannel at both end and center completly fixed and arch at top as per drawing with SS friction hinges (300mm X 19mm X1.9mm) made sash upto 67mm X 110mm and outer frame 75mm all having wall thickness 2.2mm ± 0.2mm. Window shall be provided with DGU Glass 6mm-12mm-6mm clear toughened of saint gobian makeand all accessories and Hardware as per approved drawings completed in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge. |
| 165 | Providing and fixing roofing with Shingle of make technonicol or equivalent complete including applying a bitumenious coat of primer - organic solvent based primer at the rate 0.25 -0.35 litr. / sqm with arelative viscosity of 15-40 S over the primer coat, the layer of 3 mm thick membrance reinforced with non - woven polyster matt 160 plus minus 20 g/m2 having polymer film as a top surface shall be laid using Butane /LPG torch and sealing all joints with minimum 75 mm side laps and 100 mm end laps to form a monolithic system and applying of 2.7 mm per layer -total thickness 5.4 mm of high Definition, Laminated Asphalt based roofing shingles having weight 12 kg / sqm and fixing HIP or Ridge with the help of nailing method complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 166 | Providing and fixing Cement board 18mm thick cement fibre board / calcium silicate board of approved quality to the existing structure with the help of self screws for laying roof/ facia under Shingle roofing, including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 167 | Providing and fixing 6 mm thick HPL Sheet ISI marked of Fundermax in lining with butt joints and fixing with rivets powder coated matching to shade of HPL Sheet complete including carriage of materials in all leads and lifts as per direction of Engineer in Charge. |
| 168 | Supplying and installation of Customised loop pile carpet of pile fiber 100 percent BCF polyproliene foam construction and type solution Dyed bulk continuous Filament Machine Gauge and stich rate 2.54 mm 1/10 39, 4 rows / 100 mm, 48/10 cms, constryuction loop pile high low scroll Graphic density Factor 189,600 Tufts / Sq. Mtrs. Tuffed pile etc. area with backing of 8 mm thick armour fixing on the floor using favicol SR solution and fixing the carpet above armour including all accessories, materials and labour complete in all respect. |
| 169 | P/L 15 mm thick Engineer flooring of approved sample as per dtawing of Mikasa Greenlam Industries code Noce Grande PRISTINE, 15 MM MAKE HAVING VINEER THCIKNESS OF 3 MM COMPLETE in all respect including skirting and reducers and to laid over 500 GSM polythene and foam 2 mm thick complete including of carriage in all leads and lifts.(1) 1200x1200 mm |
| 170 | Providing and laying 18 mm Michael Angleo Italian Marble flooring , vanity counter , facia, lining etc. of approved sample and all required shape and size as per direction of Engineer-in- Charge complete including carriage of materials in all leads and lifts as per Architectural Drawing and sample. |
| 171 | Providing and fixing 18 mm thick HDMR board in lining, with all shape and size as per direction of Engineer-in- Charge in wall lining/ panelling as per Architectural Drawing complete in all respect including carriage of materials in all leads and lifts. |
| 172 | Providing and fixing classic American white Oak Crown 4 mm Veneer with all shape and size as per direction of Engineer-in- Charge in wall lining/ panelling as per Architectural Drawing complete in all respect. |
| 173 | Providing and fixing 12 mm thick HDMR board with all shape and size as per direction of Engineer-in- Charge in wall lining/ panelling as per Architectural Drawing complete in all respect including of carriage in all leads and lifts. |
| 174 | Providing and fixing Fabric including its backing as required of approved sample , shape and size as per direction of Engineer-in- Charge in wall lining/ panelling as per Architectural Drawing complete in all respect. |
| 175 | Providing and applying PU Polish in two or more coats as per direction of Engineer -in- Charge complete including carriage of materials in all leads and lifts as per approved sample. |
| 176 | 30+15MM WOODEN FLUTING PANELING FINISH IN POLISH Providing and fixing , with all shape and size as per direction of Engineer-in- Charge in wall lining/ panelling as per Architectural Drawing complete in all respect including carriage of materials in all leads and lifts. |
| 177 | Providing and fixing first class Indian Teak wood Moulding of all required shape and size as per approved sample and Architectural drawing/ details including carriage of materials in all leads and lifts. |
| 178 | Providing and fixing Burma Teak wood Carving of all shape and size as per Architectural Drawing and design complete in all respect. |
| 179 | Extra labour for Arch shape in wooden members / frames etc. as per Architectural Drawing and design complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 days