|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto any height including getting out the excavated soil and disposal of surplus excavated soil as directed, within any all kind of soil including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 2 | Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete including cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 3 | Providing weepholes in brick masonry/ stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm(hundred milimetre)dia PVC pipe extending through the full width of the structures with slope of 1(v):20(H)(one vertical twenty horzontial) towards drawing face complete as per drawings and technical specification clause 614,709,1204.3.7 including carriage of material with in all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 4 | Providing & laying cobbel stone 75 mm (Seventy five millimetre) thickness of specific shade & partern of make NTC or its equivalend in footpath of road including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 5 | Providing and laying 60mm (sixty millimetre) thick M-40 ( M- Forty) grade heavy duty precast cement concrete interlocking paver blocks of NTC make of any coloured over sand as per table 1500.5 and MORD 2014 technical specification of section1500 of clause 1504 ,including carriage of material within all leads and lifts and other incidentials.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying (M-25) (M-twenty five) Grade Design Mix mechanically mixed and vibrated concrete for reinforced cement concrete in foundation upto all depth/heights for all type structure complete of reinforced cement concrete standard concrete design mix of with cement contents not less than 400kg.(four hundred kilogram) per cubic metre complete as required at site which may arise for all heights/ depths including the cost of form work with steel plates as per drawings and technical specification MORD 2014 Clause 802,803,1202,1203 as per the direction of the Engineer-in- chargeincluding carriage of material with in all leads and lifts and other incidentals .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 7 | Providing and laying tor steel (Sail/RINL/Shyam steel Tisco, Jindal make) reinforcement for reinforced cement concrete work including ,bending, binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 8 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm ( Three millimetre) thick corrugated sheet metal beam rail, 70 cm ( Seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm ( One hundred fifty into seventy five into five millimetre) spaced 2 m ( Two metre) centre to centre, 1.8 m ( One point eight metre) high, 1.1 m ( One point one) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm ( One hundred fifty into seventy five into five millimetre) , 330 mm ( Three millimetre) long complete as per MORD technical specification -2014 section 800 of clause 810 including carraige of materials within all leads and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 9 | Supply, installation, testing and commissioning of Solar LED Post Top Luminaire complete with integrated solar photovoltaic module. LED luminaire, battery, charge controller, mounting arrangement and all accessories. The luminaire shall provide a minimum lumen output of 2.880 efficacy of minimum 120 Im/W. The system shall be provided with a solar PV module, LiFePO, battery of minimum 12 AH capacity, and an intelligent charge controller with protection against overcharging, deep discharge, reverse polarity and short circuit. The luminaire shall provide automatic dusk-to-dawn operation and deliver minimum 10 hours of operation per night under standard operating conditions. The luminaire shall be suitable for installation on poles of 3-4 m mounting height, and shall have a minimum ingress protection rating of IP65. The housing shail be corrosion-resistant and suitable for outdoor applications. The complete system shall be supplied with a minimum two year comprehensive warranty including PCB, DC battery connections and any other activity that may be required for the proper functioning of the system Luxmax SPT 24 complete including carraige of materials within all leads and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 10 | Providing and fixing cat eye (Solar Powered) make ( 3M) of size 100x20mm (one hundred into one hundred twenty millimetre) made of heavy duty body shall be molded dual shank ASA /Acyclic styrene acyloretrite ) or HP/High impact polystyrene) ort ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. The reflective panels on both side with at least 12cm ( Twelve centimetre) of each area side. The luminance intensity should be as per the specification ASTM as recommended in BS-8873 part 4 1973 as per approved sample and manufacture by the Engineer-in-charge including carriage of materail within all leads and lifts. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , sale tax or other taxes imposed by the Government. |
| 11 | Providing and fixing dual directional warner/ edge marker of episodal shape of 1.0m (one metre) long with 3 (three) numbers retro-reflectorised divice of 15 cm on both side as per IRC: 79 specification complete in all respect fixed in M-15 grade size300mm x 300 mm x 450 mm including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in- charge. The rates are includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. |
| 12 | Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five millimetre )thick including reflectorising glass beads @ 250 gms ( at the rate of two hundred fifty gram per square metre )per sqm area, thickness of 2.5 mm (two point five millimetre ) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per entire direction of Engineer-in - Charge including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, GST , sale tax or other taxes imposed by the Government. |
| 13 | Providing and fixing cat eye make ( 3M) of size 100x20mm (one hundred into one hundred twenty millimetre) made of heavy duty body shall be molded dual shank ASA /Acyclic styrene acyloretrite ) or HP/High impact polystyrene) ort ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. The reflective panels on both side with at least 12cm. of each area side. The luminance intensity should be as per the specification ASTM as recommended in BS-8873 part 4 1973 as per approved sample and manufacture by the Engineer-in-charge .including carriage of materail within all leads and lifts. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , sale tax or other taxes imposed by the Government. |
| 14 | Providing and fixing (Retro-reflectorised Traffic Signs 900x900x900mm triangular) of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. The rates are inclusive of octroi, royality, Malkana, toll tax, GST , sale tax or other taxes imposed by the Government. |
| 15 | Providing and fixing (Speed Limit Sign 600 mm dia. Circular) of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 16 | Providing and erecting Direction and Place Identification signs with size 900x600mm (nine hundred into six hundred milimetre) retro-reflectorised sign as per IRC:67 (IRC - sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm (two millimetre) thick size 900 x 600mm (nine hundred into six hundred milimetre) with area not exceeding 0.9 sqm (zero point nine square metre) supported on mild steel angle iron post 75x75x6mm (seventy five into seventy five into six millimetre) 2 (two) Nos firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450 x 450 x 600 mm (four hundred fifty into four hundred fifty into six hundred millimetres), 600 mm (six hundred millimetre) below ground level as per approved drawing and M.O.R.D. Tehnical Specification Clause 1701 including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 17 | Providing and installation of High- Density 3-D ( Three-D) Relief Mural in FRP with intricate artistic detailing, superior surface finishing, transportation as per approved design and specifications complete including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 18 | Providing and laying M-10 (M-Ten )Grade Design Mix mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation/ for all type structure complete of plain cement concrete with cement contents not to be less than 300kg.(three hundred kilogram) per cubic metre in or under water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification MORD 2014 section 800,900 and 1200 as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 20 | Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 21 | Design, fabrication, supply, installation and commissioning of Scrap Metal Art Sculpture using recycled MS/CI/Aluminium components including cutting, welding, grinding, surface preparation, primer and enamel/PU paint finish, complete with RCC foundation, anchor bolts, transportation, erection, all labour, tools, tackles and incidentals, complete as per approved design and drawing as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. |
| 22 | Providing and fixing LED Metal SIGNAGES BOARD with lighting (RGB) provision in rectangular shape with power supply units and sensors system complete as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 23 | Providing and laying at or near ground level factory made kerb stone of M-25 ( M- Twenty five) grade cement concrete in position to the required line, level and curvature,jointed with cement mortar 1:3 (one cement: three sand), including making joints with or without grooves thickness of joints except at sharp curve shall not to more than 5mm (five millimetre) including making drainage opening wherever required complete as per the direction of the Engineer-in- charge including carriage of material with in all leads and lifts and other incidentals .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
