|
| 1 | C)Cement -(Std. consistency, fineness,specific gravity, setting time, compressive strength soundness |
| 2 | Item no.2.: Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete |
| 3 | Item No.3:- Excavation for foundation in hard rock by blasting including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. |
| 4 | Item no 4-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 5 | Item No 5 :-Providing and laying in situ / ready mix M-20 cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu R.C.C.solid piers,column etc . including provision of V shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete. Includingplywood/steel formwork, centering ( excluding dewatering by means of pump) and including bailling out ater and including CM 1:3 curing complete. a) Height upto 5 M. (With Concrete Mixer) |
| 6 | Item no.6- Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with Natural / VSI tandard Artificial Sand |
| 7 | Item no.7- Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) |
| 8 | Item No 8- Providing and laying in situ / ready mix M25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSIstandard Artificial Sand) |
| 9 | Item No 9 - Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete |
| 10 | Item No 10 -Providing tar paper bearing including laying in proper position etc. complete. |
| 11 | Item 11- Providing and laying cement concrete wearing coat M20 grade with batch mix type concrete mixer with SCADA including reinforcement as per drawings and technical specifications etc complete. |
| 12 | Item 12- Providing and laying weep holes of 100 mm diameter AC/PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 13 | Item 13- Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 50mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. as per detailed drawing, with 3 coats of approved yellow and black paint |
| 14 | Item no 14- Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. |
| 15 | Item no 15-Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc.complete. (by granular material) |
| 16 | Item no 16- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on frontside and grey stove enamel on back side and border / messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m longpainted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 17 | Item No. 17:- Re Payment of testing charges |
| 18 | A)Sand - (sieve Analysis), silt and clay |
| 19 | B)Metal -(Water absorption, specific gravity, impact value, crushing valu) |
| 20 | C)Cement -(Std. consistency, fineness,specific gravity, setting time, compressive strength soundness |
| 21 | D)Concrete Cube - compressive strength of CC cube |
| 22 | E)Mix design m-25 |
| 23 | F) Steel i) up to 16 mm(set of 3 bars) |
| 24 | ii) above 16 mm( tensile strength, elongation, yield stress, wt. per meter, bend/ rebend test, proof stress. Please Enable Macros to View BoQ information |
