Tender For Repair/ Maintenance Of Path/ Wall And Other Misc B/R Works In Dispersal Area At Af Stn, Sonegaon.
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
12 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Path/ Wall And Other Misc B/R Works In Dispersal Area At Af Stn, Sonegaon.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed. |
| 2 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. |
| 3 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius using old bricks obtained from demolition built in CM (1:4) complete all as specified and directed. |
| 4 | M & L for cement concrete (1:3:6) Type C1 using 20mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth with using extra cement complete all as specified and as directed. |
| 5 | M & L for PCC (1:2:4) Type B-0 (using 12.5mm graded stone aggregate) as in coping, benching of manholes, blocks for fixing of rungs and similar works including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick walls or stone walls, ceiling etc including racking out of joints hacking for key scrubbing down with water and disposal of rubbish outside the MOD land complete all as specified and directed. |
| 7 | M & L for 15 mm thick rendering on walls surfaces in cement mortar (1:4) on fair faces of brick work, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | Demolition of stone slabs and chequered floor tiles of any description or thickness in floors aprons etc laid dry and pointed complete all as specified and directed. |
| 9 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade approved design and colour laid over 40mm thick layer of sand cushion complete all as specified and directed.Note: - Rate inclusive of sand cushioning. |
| 10 | M & L for 75mm thick PCC (1:3:6) Type C2 using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 11 | M & L for 100mm thick PCC (1:2:4) Type B1 (using 20mm graded stone aggregate) as in floor finished even and fair complete all as specified and directed. |
| 12 | M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘B’ complete all as specified and directed. |
| 13 | M & L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion exterior paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 14 | Demolition of cement concrete in ground floor n. exc 15cm thickness (below or above ground level) and removing the demolished material and debris outside MD land complete all as specified and directed. |
| 15 | M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.Note: - Inner girth only measured. |
| 16 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and directed. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and similar work complete all as specified and directed. |
| 18 | S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290.Gde-E-165 complete all as specified and as directed. |
| 19 | M & L for one coat oil bound distemper over old painted surfaces of walls including preparation of surfaces by scrubbing washing, putty to fill holes complete all as specified and directed. |
| 20 | M & L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 21 | S & F GRC Jalli not less than 15mm thick fixed in position, pattern as approved. Glass fibre (AR) min 2%, flexural strength not less than 6 Mpa, compressive strength minimum 35 Mpa design, pattern and colour as approved by Engr-in-Charge including Taking down old complete all as specified and directed. |
| 22 | Demolition of RCC of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 23 | M & L for Providing precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregate) for landings, cover slabs (for Drains.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified. Side frame as required to set the covers will be approved along-with covers (precast cover from approved manufacturer with provision of handling and holes for water seeping) |
| 24 | M & L for mild steel TMT bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender